[1] Yue S.Y., Wang Y.G., Wang H.T., Design and optimization of tandem arranged cascade in a transonic compressor. Journal of Thermal Science, 2018, 27: 349–358. https://doi.org/10.1007/s11630-018-1013-4.
[2] Cao Z.Y., Song C., Zhang X., Gao X., Liu B., Blade lean and tip leakage flows in highly loaded compressor cascades. Journal of Thermal Science, 2021, 30: 1388–1405. https://doi.org/10.1007/s11630-021-1486-4.
[3] Huang S., Yang C.W., Li Z.L., Han G., Zhao S.F., Lu X.G., Effect of non-axisymmetric end wall on a highly loaded compressor cascade in multi-conditions. Journal of Thermal Science, 2021, 30: 1363–1375. https://doi.org/10.1007/s11630-021-1448-x.
[4] Zhang J., Du J., Zhang M., Chen Z., Zhang H.W., Nie C.Q., Aerodynamic performance improvement of a highly loaded compressor airfoil with coanda jet flap. Journal of Thermal Science, 2022, 31: 151–162. https://doi.org/10.1007/s11630-022-1564-2.
[5] Zhu W., Cai L., Wang S.T., Wang Z.Q., Numerical investigation of circumferential groove casing treatment in a highly-loaded low-reaction transonic compressor rotor. Journal of Thermal Science, 2020, 29: 916–927. https://doi.org/10.1007/s11630-019-1180-y.
[6] Cao Z.Y., Song C., Zhang X., Gao X., Liu B., Computational study on the boundary layer suction effects in the supersonic compressor flow with a bowed blade. Journal of Thermal Science, 2022, 31: 511–528. https://doi.org/10.1007/s11630-022-1582-0.
[7] Zhao X.H., Li Y.H., Wu Y., Li J., Investigation of endwall flow behavior with plasma flow control on a highly loaded compressor cascade. Journal of Thermal Science, 2012, 21: 295–301. https://doi.org/10.1007/s11630-012-0547-0.
[8] Babu S., Chatterjee P., Pradeep A.M., Transient nature of secondary vortices in an axial compressor stage with a tandem rotor. Physics of Fluids, 2022, 34(6): 065125. https://doi.org/10.1063/5.0092226.
[9] Liu B.J., Zhang C.H., An G.F., Fu D., Yu X.J., Using tandem blades to break loading limit of highly loaded axial compressors. Chinese Journal of Aeronautics, 2022, 35(4): 165–175. https://doi.org/10.1016/j.cja.2021.07.031.
[10] Ghazanfari B., Nili-Ahmadabadin M., Torabi-Farsani A., Noorsalehi M.H., Numerical study of camber and stagger angleeffects on the aerodynamic performance oftandem-blade cascades. Propulsion and Power Research, 2018, 7(1): 30–42.
https://doi.org/10.1016/j.jppr.2018.02.003.
[11] Eshraghi H., Boroomand M., Tousi A.M., Fallah M.T., Mohammadi A., The effect of variable stator on performance of a highly loaded tandem axial flow compressor stage. Journal of Thermal Science, 2016, 25: 223–230. https://doi.org/10./s11630-016-0854-y.
[12] Böhle M., Frey T., Numerical and experimental investigations of the three-dimensional-flow structure of tandem cascades in the sidewall region. Journal of Fluids Engineering, 2014, 136(7): 071102. https://doi.org/10.1115/1.4026880.
[13] Trehan S., Roy B., Gap optimization for tandem blades in axial flow compressor/fan using computational tools. AIAA, 2007, Article ID: 2007-5024. https://doi.org/10.2514/6.2007-5024.
[14] McGlumphy J., Ng W.F., Wellborn S.R., Kempf S., Numerical investigation of tandem airfoils for subsonic axial-flow compressor blades. Journal of Turbomachinery, 2009, 131(2): 021018. https://doi.org/10.1115/1.2952366.
[15] Schneider T., Kožulović D., Flow characteristics of axial compressor tandem cascades at large off-design incidence angles. ASME paper, 2013, GT2013-94708. https://doi.org/10.1115/GT2013-94708.
[16] Ju Y.P., Zhang C.H., Multi-objective optimization design method for tandem compressor cascade at design and off design conditions. ASME paper, 2010, GT2010-22655. https://doi.org/10.1115/GT2010-22655.
[17] McGlumphy J., Ng W.F., Wellborn S.R., Kempf S., 3D numerical investigation of tandem airfoils for a core compressor rotor. Journal of Turbomachinery, 2010, 132 (3): 031009. https://doi.org/10.1115/1.3149283.
[18] Mohsen M., Owis F.M., Hashim A.A., The impact of tandem rotor blades on the performance of transonic axial compressors. Aerospace Science and Technology, 2017, 67: 237–248. https://doi.org/10.1016/j.ast.2017.04.019.
[19] Hoeger M., Baier R.D., Fischer S., Neudorfer J., High turning compressor tandem cascade for high subsonic flows, part 1: Aerodynamic design. AIAA, 2011, Article ID: 2011-5601. https://doi.org/10.2514/6.2011-5601.
[20] Mueller L., Kozulovic D., Wulff D., Fischer S., Stark U., High turning compressor tandem cascade for high subsonic flows-part 2: numerical and experimental investigations. AIAA, 2011, Article ID: 2011-5602. https://doi.org/10.2514/6.2011-5602.
[21] Heinrich A, Tiedemann C, Peitsch D. Experimental investigations of secondary flow development around tandem vanes in a 2D linear stator compressor cascade. Proceedings of 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 2015, No. ETC2015-237.
[22] Heinrich A., Tiedemann C., Peitsch D., Experimental investigations of the aerodynamics of highly loaded tandem vanes in a high-speed stator cascade. ASME paper, 2017, Article ID: GT2017-63235. https://doi.org/10.1115/GT2017-63235.
[23] Heinrich A., Peitsch D., Recent insights into the flow topology around highly loaded tandem vanes. Proceedings of GPPS Forum 19 Global Power and Propulsion Society, Beijing, 16th-18th September, 2019.
[24] Schluer C., Böhle M., Cagna M., Numerical investigation of the secondary flows and losses in a high-turning tandem compressor cascade. 8th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, 2009.
[25] Frey T., Böhle M., Flow structure of tandem cascades in the region of the sidewalls. ASME paper, 2013, Article ID: FEDSM2013-16034. https://doi.org/10.1115/FEDSM2013-16034.
[26] Hertel C., Bode C., Kožulović D., Schneider T., Investigations on aerodynamic loading limits of subsonic compressor tandem cascades: end wall flow. ASME paper, 2014, Article ID: GT2014-26978. https://doi.org/10.1115/GT2014-26978.
[27] Liu B.J., Yu X.J., An G.F., Tao Y., Zhou A.Y., Li L.L., Aerodynamic design and optimization of tandem blades. Aeroengine, 2021, 47(4): 37–50. https://doi.org/10.13477/j.cnki.aeroengine.2021.04.005.
[28] Zhang L.X., Wang S.T., Zhu W., Application of endwall contouring in a high-subsonic tandem cascade with endwall boundary layer suction. Aerospace Science and Technology, 2019, 84: 245–256. https://doi.org/10.1016/j.ast.2018.08.041.
[29] Tesch A., Ortmanns J., An experimental investigation of a tandem stator flow characteristic in a low speed axial research compressor. ASME paper, 2014, Article ID: GT2014-26104. https://doi.org/10.1115/GT2014-26104.
[30] Eckel J., Heinrich A., Janke C., Ortmanns J., Peitsch D., 3d numerical and experimental investigation of high turning compressor tandem cascade. Conference: Deutscher Luft-und Raumfahrtkongress, 2016.
[31] Lieblein S., Johnsen I.A., Resume of transonic- compressor research at NACA lewis laboratory. Journal for Engineering for Power, 1961, 83(3): 219–232. https://doi.org/10.1115/1.3673177.
[32] Lei V.M., Spakovszky Z.S., Greitzer E.M., A criterion for axial compressor hub corner stall. Journal of Turbomachinery, 2008, 130(3): 031006. https://doi.org/10.1115/1.2775492.
[33] Wang M.Y., Lu X.G., Zhao S.F., Zhang Y.F., Numerical investigations of vortex dynamics and loss generation in the corner separation region of a high subsonic compressor blade. Physics of Fluids, 2023, 35(2): 025104. https://doi.org/10.1063/5.0134670.
