[1] Schulz H.D., Three-dimensional separated flow field in the endwall region of an annular compressor cascade in the presence of rotor-stator interaction: Part 2—unsteady flow and pressure field. Journal of Turbomachinery, 1990, 112(4): 679–690.
[2] Gbadebo S.A., Cumpsty N.A., Hynes T.P., Three- dimensional separations in axial compressors. Journal of Turbomachinery, 2005, 127(2): 457–469.
[3] Zander V., Dobriloff C., Lumpe M., et al., Wall shear stress measurements on a highly loaded compressor cascade. Journal of Turbomachinery, 2011, 135(1): 1–8.
[4] Beselt C., Eck M., Peitsch D., Three-dimensional flow field in a highly loaded compressor cascade. Journal of Turbomachinery, 2014, 136(10): V02DT44A018.
[5] Kerrebrock J.L., Reinjen D.P., Ziminsky W.S., et al., Aspirated compressors. ASME International Gas Turbine & Aeroengine Congress & Exhibition 1997, Orlando, USA, Paper No. 97-GT-525.
[6] Kerrebrock J.L., Drela M., Merchant A.A., et al., Family of designs for aspirated compressors. ASME International Gas Turbine and Aeroengine Congress and Exhibition 1998, Stockholm, Sweden, Paper No. 98-GT-196.
[7] Kerrebrock J.L., The prospects for aspirated compressors. Fluids Conference and Exhibit, 1998, Paper No. AIAA 2000-2472.
[8] Power B., Xu L., Wellborn S., Numerical and experimental findings of a highly-loaded aspirated cascade. ASME Turbo Expo Turbine Technical Conference and Exposition 2014, Düsseldorf, Germany, Paper No. GT2014-27098.
[9] Zhou X., Zhao Q., Xiang X., et al., Investigation of groove casing treatment in a transonic compressor at different speeds with control volume method. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering, 2016, 230(G13): 191–197.
[10] Zhou X., Zhao Q., Cui W., et al., Investigation on axial effect of slot casing treatment in a transonic compressor. Applied Thermal Engineering, 2017, 126: 53–69.
[11] Dinh C.T., Vu D.Q., Kim K.Y., Effects of rotor-bleeding airflow on aerodynamic and structural performances of a single-stage transonic axial compressor. International Journal of Aeronautical and Space Sciences, 2019, 21: 599–611.
[12] Zhao B., Li S., Li Q., et al., The impact of bleeding on compressor stator corner separation. ASME-JSME-KSME 2011, Shizuoka, Japan, Paper No. AJK2011-22001.
[13] Borra H.K., Alone D.B., Stall margin improvement of a single stage transonic axial flow compressor using naturally aspirated slots. Proceedings of the ASME Gas Turbine India Conference 2015, Hyderabad, India, Paper No. GTINDIA2015-1211.
[14] Merchant A., Kerrebrock J., Epstein A., Compressors with aspirated flow control and counter-rotation. 2nd AIAA Flow Control Conference 2004, Oregon, USA, Paper No. AIAA 2004-2514.
[15] Schuler B.J., Kerrebrock J.L., Merchant A., Experimental investigation of a transonic aspirated compressor. Journal of Turbomachinery, 2005, 127(1): 43–51.
[16] Cao Z., Gao X., Zhang T., et al., Flow mechanism and aspiration strategies in an ultra-highly loaded supersonic compressor cascade. Aerospace Science and Technology, 2020, 104(1): 105989.
[17] Wang Y.G., Guo R.H., Zhao L.B., et al., Numerical investigation on the effects of re-organized shock waves on the flow separation for a highly-loaded transonic compressor cascade. Journal of Thermal Science, 2012, 21(1): 13–20.
[18] Wang Y.G., Rao A.G., Eitelberg G., Study of shock wave control by suction & blowing on a highly-loaded transonic compressor cascade. International Journal of Turbo and Jet Engines, 2013, 30(1): 79–90.
[19] Chen S.W., Sun S.J., Hao X., et al., Experimental study of the impact of hole-type suction on the flow characteristics in a high-load compressor cascade with a clearance. Experimental Thermal & Fluid Science, 2013, 51(1): 220–226.
[20] Zhang H.X., Chen S.W., Meng Q.H., et al., Flow separation control using unsteady pulsed suction through endwall bleeding holes in a highly loaded compressor cascade. Aerospace Science and Technology, 2018, 72(1): 455–464.
[21] Ding J., Chen S., Hao X., et al., Control of flow separations in compressor cascade by boundary layer suction holes in suction surface. ASME Turbo Expo: Turbine Technical Conference & Exposition 2013, Texas, USA, Paper No. GT2013-94723.
[22] Chen S.W., Gong Y., Li W.H., et al., Numerical study of the air bleeding caused non-uniformity in axial compressor. Journal of Thermal Science, 2020, 29(1): 219–231.
[23] Hamed A., Morell A., Bellamkonda G., Three-dimensional simulations of bleed-hole rows/shock-wave/turbulent boundary-layer interactions. AIAA Aerospace Sciences Meeting Including the New Horizons Forum & Aerospace Exposition 2012, Tennessee, USA, Paper No. AIAA 2012-0840.
[24] Shih T., Control of shock-wave/bound-layer interactions by bleed. International Journal of Fluid Machinery & Systems, 2008, 1(1): 24–32.
[25] Rimlinger M.J., Shih I.P., Chyu W.J., Shock-wave/ boundary-layer interactions with bleed through rows of holes. Journal of Propulsion & Power, 1996, 12(2): 217–224.
[26] Hu Y.J., Wang S.T., Zhang L.X., et al., Aerodynamic design of a highly loaded supersonic aspirated axial flow compressor stage. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, 2014, 228(3): 241–254.
[27] Dunker R.J., Hungenberg H.G., Transonic axial compressor using laser anemometry. AIAA Journal, 1980, 18(8): 973–979.
[28] Li B., Mu G., Luo L., et al., Effect of combined boundary layer suction on the separation control in a highly loaded transonic compressor cascade. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2023: 09576509231205346
[29] Davis D.O., Willis B.P., Hingst W.R., Flowfield measurements in a slot-bled oblique shock wave and turbulent boundary-layer interaction. Aerospace Sciences Meeting and Exhibit 1998, Washington, USA, Paper No. AIAA 95-0032.
[30] Koo B., Kang Y.D., Control of synthetic hairpin vortices in laminar boundary layer for skin-friction reduction. Journal of Marine Science and Engineering, 2020, 8(1): 1–14.
