[1] Dostal V., Hejzlar P., Driscoll M.J., High-performance supercritical carbon dioxide cycle for next-generation nuclear reactors. Nuclear Technology, 2017, 154(3): 265–282.
[2] Wang K., Zhang Z.D., Li M.J., Min C.H., A coupled optical-thermal-fluid-mechanical analysis of parabolic trough solar receivers using supercritical CO2 as heat transfer fluid. Applied Thermal Engineering, 2021, 183: 116154.
[3] Ruiz-Casanova E., Rubio-Maya C., Pacheco-Ibarra J.J., Ambriz-Diaz V.M., Romero C.E., Wang X.C., Thermodynamic analysis and optimization of supercritical carbon dioxide brayton cycles for use with low-grade geothermal heat sources. Energy Conversion and Management, 2020, 216: 112978.
[4] Ahn Y., Bae S.J., Kim M., Cho S.K., Baik S., Lee J.I., Cha J.E., Review of supercritical CO2 power cycle technology and current status of research and development. Nuclear Engineering and Technology, 2015, 47(6): 647–661.
[5] Ahn Y., Lee J., Kim S.G., Lee J.I., Cha J.E., Lee S.W., Design consideration of supercritical CO2 power cycle integral experiment loop. Energy, 2015, 86: 115–127.
[6] Mohammed R.H., Alsagri A.S., Wang X.L., Performance improvement of supercritical carbon dioxide power cycles through its integration with bottoming heat recovery cycles and advanced heat exchanger design: A review. International Journal of Energy Research, 2020, 44(9): 7108–7135.
[7] Rao Z.H., Xue T.C., Huang K.X., Liao S.M., Multi-objective optimization of supercritical carbon dioxide recompression brayton cycle considering printed circuit recuperator design. Energy Conversion and Management, 2019, 201: 112094.
[8] Kwon J.S., Son S., Heo J.Y., Lee J.I., Compact heat exchangers for supercritical CO2 power cycle application. Energy Conversion and Management, 2020, 209: 112666.
[9] Ren Z., Zhao C.R., Jiang P.X., Bo H.L., Investigation on local convection heat transfer of supercritical CO2 during cooling in horizontal semicircular channels of printed circuit heat exchanger. Applied Thermal Engineering, 2019, 157: 113697.
[10] Chen M.H., Sun X.D., Christensen R.N., Thermal-hydraulic performance of printed circuit heat exchangers with zigzag flow channels. International Journal of Heat and Mass Transfer, 2019, 130: 356–367.
[11] Baik Y.J., Jeon S., Kim B., Jeon D., Byon C., Heat transfer performance of wavy-channeled PCHEs and the effects of waviness factors. International Journal of Heat and Mass Transfer, 2017, 114: 809–815.
[12] Wen Z.X., Lv Y.G., Li Q., Zhou P., Numerical study on heat transfer behavior of wavy channel supercritical CO2 printed circuit heat exchangers with different amplitude and wavelength parameters. International Journal of Heat and Mass Transfer, 2020, 147: 118922.
[13] Kim W., Baik Y.J., Jeon S., Jeon D., Byon C., A mathematical correlation for predicting the thermal performance of cross, parallel, and counterflow PCHEs. International Journal of Heat and Mass Transfer, 2017, 106: 1294–1302.
[14] Lv Y.G., Wen Z.X., Li Q., Qiu Y., Numerical investigation on thermal hydraulic performance of hybrid wavy channels in a supercritical CO2 precooler. International Journal of Heat and Mass Transfer, 2021, 181: 121891.
[15] Lee S.M., Kim K.Y., Optimization of zigzag flow channels of a printed circuit heat exchanger for nuclear power plant application. Journal of Nuclear Science and Technology, 2012, 49(3): 343–351.
[16] Lee S.M., Kim K.Y., Comparative study on performance of a zigzag printed circuit heat exchanger with various channel shapes and configurations. Heat and Mass Transfer, 2013, 49(7): 1021–1028.
[17] Lee S.M., Kim K.Y., A parametric study of the thermal-hydraulic performance of a zigzag printed circuit heat exchanger. Heat Transfer Engineering, 2014, 35(13): 1192–1200.
[18] Zhang H.Y., Guo J.F., Huai X.L., Cheng K.Y., Cui X.Y., Studies on the thermal-hydraulic performance of zigzag channel with supercritical pressure CO2. The Journal of Supercritical Fluids, 2019, 148: 104–115.
[19] Ngo T.L., Kato Y., Nikitin K., Tsuzuki N., New printed circuit heat exchanger with S-shaped fins for hot water supplier. Experimental Thermal and Fluid Science, 2006, 30(8): 811–819.
[20] Tsuzuki N., Kato Y., Ishiduka T., High performance printed circuit heat exchanger. Applied Thermal Engineering, 2007, 27(10): 1702–1707.
[21] Wang K., Zhang X.Y., Zhang Z.D., Min C.H., Three-dimensional shape optimization of fins in a printed circuit recuperator using S-CO2 as the heat-transfer fluid. International Journal of Heat and Mass Transfer, 2022, 192: 122910.
[22] Xu X., Ma T., Li L., Zeng M., Chen Y., Huang Y., Wang Q., Optimization of fin arrangement and channel configuration in an airfoil fin PCHE for supercritical CO2 cycle. Applied Thermal Engineering, 2014, 70(1): 867–875.
[23] Lee S.Y., Park B.G., Chung J.T., Numerical studies on thermal hydraulic performance of zigzag-type printed circuit heat exchanger with inserted straight channels. Applied Thermal Engineering, 2017, 123: 1434–1443.
[24] Baik S., Kim S.G., Lee J., Lee J.I., Study on CO2-water printed circuit heat exchanger performance operating under various CO2 phases for S-CO₂ power cycle application. Applied Thermal Engineering, 2017, 113: 1536–1546.
[25] Wen Z.X., Lv Y.G., Li Q., Comparative study on flow and heat transfer characteristics of sinusoidal and zigzag channel printed circuit heat exchangers. Science China-Technological Sciences, 2020, 63(4): 655–667.
[26] Yang Y., Li H.Z., Yao M.Y., Gao W., Zhang Y.F., Zhang L., Investigation on the effects of narrowed channel cross-sections on the heat transfer performance of a wavy-channeled PCHE. International Journal of Heat and Mass Transfer, 2019, 135: 33–43.
[27] Li H., Kruizenga A., Anderson M., Corradini M., Luo Y., Wang H., Li H., Development of a new forced convection heat transfer correlation for CO2 in both heating and cooling modes at supercritical pressures. International Journal of Thermal Sciences, 2011, 50(12): 2430–2442.
[28] Jiang P.X., Liu B., Zhao C.R., Luo F., Convection heat transfer of supercritical pressure carbon dioxide in a vertical micro tube from transition to turbulent flow regime. International Journal of Heat and Mass Transfer, 2013, 56(1–2): 741–749.
[29] Xu R.N., Luo F., Jiang P.X., Experimental research on the turbulent convection heat transfer of supercritical pressure CO2 in a serpentine vertical mini tube. International Journal of Heat and Mass Transfer, 2015, 91: 552–561.
[30] Forooghi P., Hooman K., Numerical study of turbulent convection in inclined pipes with significant buoyancy influence. International Journal of Heat and Mass Transfer, 2013, 61: 310–322.
[31] Cabeza L.F., Gracia A. de, Fernández A.I., Farid M.M., Supercritical CO2 as heat transfer fluid: A review. Applied Thermal Engineering, 2017, 125: 799–810.
[32] Zhang S.J., Xu X.X., Liu C., Dang C.B., A review on application and heat transfer enhancement of supercritical CO2 in low-grade heat conversion. Applied Energy, 2020, 269: 114962.
[33] Zhang H.Y., Guo J.F., Huai X.L., Cui X.Y., Cheng K.Y., Buoyancy effects on coupled heat transfer of supercritical pressure CO2 in horizontal semicircular channels. International Journal of Heat and Mass Transfer, 2019, 134: 437–449.
[34] Ciofalo M., Arini A., Di-Liberto M., On the influence of gravitational and centrifugal buoyancy on laminar flow and heat transfer in curved pipes and coils. International Journal of Heat and Mass Transfer, 2015, 82: 123–134.
[35] Li Z., Zhai Y., Li K., Wang H., Lu J., A quantitative study on the interaction between curvature and buoyancy effects in helically coiled heat exchangers of supercritical CO2 Rankine cycles. Energy, 2016, 116: 661–676.
[36] Zhang S.J., Xu X.X., Liu C., Liu X.X., Zhang Y.D., Dang C.B., The heat transfer of supercritical CO2 in helically coiled tube: trade-off between curvature and buoyancy effect. Energy, 2019, 176: 765–777.
[37] Zhang S., Xu X., Liu C., Zhang Y., Dang C., The buoyancy force and flow acceleration effects of supercritical CO2 on the turbulent heat transfer characteristics in heated vertical helically coiled tube. International Journal of Heat and Mass Transfer, 2018, 125: 274–289.
[38] Cui X., Guo J., Huai X., Zhang H., Cheng K., Zhou J., Numerical investigations on serpentine channel for supercritical CO2 recuperator. Energy, 2019, 172: 517–530.
[39] Wang K., Xu X., Wu Y., Liu C., Dang C., Numerical investigation on heat transfer of supercritical CO2 in heated helically coiled tubes. The Journal of Supercritical Fluids, 2015, 99: 112–120.
[40] Zhang Q., Li H.X., Liu J.L., Lei X.L., Wu C., Numerical investigation of different heat transfer behaviors of supercritical CO2 in a large vertical tube. International Journal of Heat and Mass Transfer, 2020, 147: 118944.
[41] Lemmon E.W., Huber M.L., McLinden M.O., NIST Standard Reference Database 23: Reference fluid thermodynamic and transport properties-REFPROP, version 9.1. National Institute of Standards and Technology, Standard Reference Data Program, Gaithersburg, 2013.
[42] Ishizuka T., Kato Y., Muto Y., Nikitin K., Tri N.L., Hashimoto H., Thermal-hydraulic characteristics of a printed circuit heat exchanger in a supercritical CO2 loop. The 11th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-11), Avignon, France, 2005. DOI: 10.1016/j.ijrefrig.2005.11.005.
[43] Chang L.M., Wang L.B., Song K.W., Sun D.L., Fan J.F., Numerical study of the relationship between heat transfer enhancement and absolute vorticity flux along main flow direction in a channel formed by a flat tube bank fin with vortex generators. International Journal of Heat and Mass Transfer, 2009, 52(7–8): 1794–1801.
[44] Ren Z., Zhang L., Zhao C.R., Jiang P.X., Bo H.L., Local flow and heat transfer of supercritical CO2 in semicircular zigzag channels of printed circuit heat exchanger during cooling. Heat Transfer Engineering, 2020, 42: 1–25.
[45] Saeed M., Berrouk A.S., Salman-Siddiqui M., Ali-Awais A., Numerical investigation of thermal and hydraulic characteristics of sCO2-water printed circuit heat exchangers with zigzag channels. Energy Conversion and Management, 2020, 224: 113375.
[46] Yan C.S., Xu J.L., Zhu B.G., He X.T., Liu G.L., Numerical study on convective heat transfer of supercritical CO2 in vertically upward and downward tubes. Science China Technological Sciences, 2021, 64(5): 995–1006.
