[1] Chen K., Chen Y., She Y., Construction of effective symmetrical air-cooled system for battery thermal management. Applied Thermal Engineering, 2020, 166: 114–679.
[2] Jouhara H., Chauhan A., Nannou T., Heat pipe-based systems—Advances and applications. Energy, 2017, 128: 729–754.
[3] Hong C., Huang Y., Integrated flat heat pipe with a porous network wick for high-heat-flux electronic devices. Experimental Thermal and Fluid Science: International Journal of Experimental Heat Transfer, Thermodynamics, and Fluid Mechanics, 2017, 85: 119–131.
[4] Mcglen R., Jachuck R., Lin S., Integrated thermal management techniques for high power electronic devices. Applied Thermal Engineering, 2004, 24: 1143–1156.
[5] Yang X., Yan Y., Mullen D., Recent developments of lightweight, high performance heat pipes. Applied Thermal Engineering, 2012, 33: 1–14.
[6] Tang H., Tang Y., Wan Z., Review of applications and developments of ultra-thin micro heat pipes for electronic cooling. Applied Energy, 2018, 223: 383–400.
[7] Chen X., Ye H., Fan X., A review of small heat pipes for electronics. Applied Thermal Engineering, 2016, 96: 1–17.
[8] Li Y., Zhou W., He J., Thermal performance of ultra-thin flattened heat pipes with composite wick structure. Applied Thermal Engineering, 2016, 102: 487–499.
[9] Li J., Lv L., Zhou G., An ultra-thin miniature loop heat pipe cooler for mobile electronics. Applied Thermal Engineering, 2016, 109: 514–523.
[10] Yang K., Tu C., Zhang W., A novel oxidized composite braided wires wick structure applicable for ultra-thin flattened heat pipes. International Communications in Heat and Mass Transfer, 2017, 88: 84–90.
[11] Tang Y., Tang H., Li J., Experimental investigation of capillary force in a novel sintered copper mesh wick for ultra-thin heat pipes. Applied Thermal Engineering, 2017, 115: 1020–1030.
[12] Li J., Lv L., Experimental studies on a novel thin flat heat pipe heat spreader. Applied Thermal Engineering, 2016, 93: 139–146.
[13] Tang Y., Hong S., Wang S., Experimental study on thermal performances of ultra-thin flattened heat pipes. International Journal of Heat and Mass Transfer, 2019, 134: 884–894.
[14] Wang X., Gao X., Bao K., Experimental investigation on the temperature distribution characteristics of the evaporation section in a pulsating heat pipe. Journal of Thermal Science, 2019, 28: 246–251.
[15] Wang X., Jia L., Experimental study on heat transfer performance of pulsating heat pipe with refrigerants. Journal of Thermal Science, 2016, 25: 449–453.
[16] Chen J., Chou J., Cooling performance of flat plate heat pipes with different liquid filling ratios. International Journal of Heat and Mass Transfer, 2014, 77: 874–882.
[17] Chen J., Chou J., The length and bending angle effects on the cooling performance of flat plate heat pipes. International Journal of Heat and Mass Transfer, 2015, 90: 848–856.
[18] Hu C., Li J., Experimental study on the start up performance of flat plate pulsating heat pipe. Journal of Thermal Science, 2011, 20: 150–154.
[19] Wang G., Quan Z., Zhao Y., Performance of a flat-plate micro heat pipe at different filling ratios and working fluids. Applied Thermal Engineering, 2018, 146: 459–468.
[20] Zhou W., Xie P., Li Y., Thermal performance of ultra-thin flattened heat pipes. Applied Thermal Engineering, 2017, 117: 773–781.
[21] Li Y., Zhou W., He J., Thermal performance of ultra-thin flattened heat pipes with composite wick structure. Applied Thermal Engineering, 2016, 102: 487–499.
[22] Zhou W., Li Y., Chen Z., A novel ultra-thin flattened heat pipe with biporous spiral woven mesh wick for cooling electronic devices. Energy Conversion and Management, 2019, 180: 769–783.
[23] Chang S.W., Porosity and effective thermal conductivity of wire screens. Journal of Heat Transfer, 1990, 112(1): 5–9.
[24] General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. JJF1059. 1-2012 Evaluation and Expression of Uncertainty in Measurement. Bei Jin: China Quality and Standards Publishing & Media Co., Ltd., 2012
[25] Kempers R., Ewing D., Ching C.Y., Effect of number of mesh layers and fluid loading on the performance of screen mesh wicked heat pipes. Applied Thermal Engineering, 2006, 26: 589–595.
[26] Wang G., Quan Z., Zhao Y., Performance of a flat-plate micro heat pipe at different filling ratios and working fluids. Applied Thermal Engineering, 2018, 146: 459–468.
[27] Zuang J., Zhang H., Heat pipe technology and engineering application. Chemical Industry Press, Beijing, 2000.
