[1] Guerrero L.A., Maas G., Hogland W., Solid waste management challenges for cities in developing countries. Waste Management, 2013, 33(1): 220–232.
[2] Kelessidis A., Stasinakis A.S., Comparative study of the methods used for treatment and final disposal of sewage sludge in European countries. Waste Management, 2012, 32(6):1186–1195.
[3] Gui X., Liu J., Cao Y., et al., Coal preparation technology: status and development in China. Energy and Environment, 2015, 26(6–7): 997–1013.
[4] Si Y., Du M., Research progress of slime utilization. Guangdong Chemical Industry, 2017, 44(4): 79–80.
[5] Zhang Y., Zhao J., Ma Z., et al., Effect of oxygen concentration on oxy-fuel combustion characteristic and interactions of coal gangue and pine sawdust. Waste Management, 2019, 87: 288–294.
[6] Wang H., Liu S., Li X., et al., Morphological and structural evolution of bituminous coal slime particles during the process of combustion. Fuel, 2018, 218: 49–58.
[7] Song Z., Jing C., Yao L., et al., Microwave drying performance of single-particle coal slime and energy consumption analyses. Fuel Processing Technology, 2016, 143: 69–78.
[8] Song Z., Jing C., Yao L., et al., Coal slime hot air/microwave combined drying characteristics and energy analysis. Fuel Processing Technology, 2016, 156: 491–499.
[9] Song S., Yang Z., Na Y., et al., Investigation on the operating characteristics of a 350 MWe supercritical CFB boiler with a polygonal furnace. Applied Thermal Engineering, 2019, 156: 178–188.
[10] Zhang W., Liu J., Gao M., et al., A novel operation cost optimization system for mix-burning coal slime circulating fluidized bed boiler unit. Applied Thermal Engineering, 2019, 148: 620–631.
[11] Cliffe K.R., Patumsawad S., Co-combustion of waste from olive oil production with coal in a fluidised bed. Waste Management, 2001, 21(1): 49–53.
[12] Gong Z., Liu Z., Zhou T., et al., Combustion and NO emission of shenmu char in a 2 MW circulating fluidized bed. Energy & Fuels, 2015, 29(2): 1219–1226.
[13] Shi Y., Ma Y., The present conditions of circulating fluidized bed boiler for using coal slime in China. Applied Energy Technology, 2012, (06): 29–33.
[14] Wu J., Wang B., Cheng F., Thermal and kinetic characteristics of combustion of coal sludge. Journal of Thermal Analysis & Calorimetry, 2017, 129(3): 1899–1909.
[15] Zhou K., Lin Q., Hu H., et al., Ignition and combustion behaviors of single coal slime particles in CO2/O2 atmosphere. Combustion and Flame, 2018, 194: 250–263.
[16] Zhou K., Lin Q., Hu H., et al., The ignition characteristics and combustion processes of the single coal slime particle under different hot-coflow conditions in N2/O2 atmosphere. Energy, 2017, 136: 173–184.
[17] Wang H., Liu S., Wang X.Y., et al., Ignition and combustion behaviors of coal slime in air. Energy & Fuels, 2017, 31(10): 11439–11447.
[18] Yin W., Li B., Wu Y., et al., Model of coal slime combustion behavior in CFB boiler. MeitanXuebao/Journal of the China Coal Society, 2015, 40(7): 1628–1633.
[19] Ministry of Environmental Protection of People’s Republic of China Emission standard of air pollutants for thermal power plants (GB 13223-2011), 2011.
[20] Neuwahl F., Cusano G., Benavides J., et al., Best available techniques (BAT) reference document for waste incineration: industrial emissions directive 2010/75/EU (Integrated Pollution Prevention and Control), 2019.
[21] Hou Z., Xiao K., Yu Z., et al., Study on NOx emission characteristics in coal slime circulating fluidized bed boiler. Journal of Engineering for Thermal Energy & Power, 2017, 2(11): 68–72.
[22] Gong Z., Zhou T., Lu Q., et al., Combustion and NOx emission characteristics of shenmu char in a circulating fluidized bed with post-combustion. Energy & Fuels, 2016, 30(1): 31–38.
[23] Zhou T., Gong Z., Lu Q., et al., Experimental study on enhanced control of NOx emission from circulating fluidized bed combustion. Energy & Fuels, 2015, 29(6): 3634–3639.
[24] Zhou T., Lu Q., Cao Y., et al., Study on the combustion and NOx emission characteristics of low rank coal in a circulating fluidized bed with post-combustion. Canadian Journal of Chemical Engineering, 2017, 95(12): 2333–2340.
[25] Song G., Xiao Y., Yang Z., et al., A comparative study on characteristics of ultra-low NOx emission and fly ash between Fugu bituminous and its semi-coke with post-combustion. Fuel Processing Technology, 2021, 211: 106618.
[26] Ponzio A., Senthoorselvan S., Yang W., et al., Ignition of single coal particles in high-temperature oxidizers with various oxygen concentrations. Fuel, 2008, 87(6): 974–987.
[27] Khatami R., Stivers C., Levendis Y., Ignition characteristics of single coal particles from three different ranks in O2/N2 and O2/CO2 atmospheres. Combustion & Flame, 2012, 159(12): 3554–3568.
[28] Riaza J., Khatami R., Levendis Y., et al., Single particle ignition and combustion of anthracite, semi-anthracite and bituminous coals in air and simulated oxy-fuel conditions. Combustion & Flame, 2014, 161(4): 1096–1108.
[29] Johnsson J.E., Formation and reduction of nitrogen oxides in fluidized-bed combustion. Fuel, 1994, 73: 1398–1415.
[30] Furusawa T., Tsunoda M., Tsujimura M., et al., Nitric oxide reduction by char and carbon monoxide: fundamental kinetics of nitric oxide reduction in fluidized bed combustion of coal. Fuel, 1985, 64(9): 1306–1309.
[31] Hayhurst A., Lawrence A., The amounts of NOx and N2O formed in a fluidized bed combustor during the burning of coal volatiles and also of char. Combustion & Flame, 1996, 105(3): 341–357
[32] Schönenbeck C., Gadiou R., Schwartz D., A kinetic study of the high temperature NO-char reaction. Fuel, 2004, 83(4–5): 443–450.
[33] He J., Song W., Gao S., et al., Experimental study of the reduction mechanisms of NO emission in decoupling combustion of coal. Fuel Processing Technology, 2006, 87(9): 803–810.
[34] Xu M., Li S., Wu Y., et al., Reduction of recycled NO over char during oxy-fuel fluidized bed combustion: Effects of operating parameters. Applied Energy, 2017, 199: 310–322.
[35] Xu M., Li S., Wu Y., et al., The characteristics of recycled NO reduction over char during oxy-fuelfluidized bed combustion. Applied Energy, 2017, 190: 553–562.
[36] Marek W., Pels J., Moulijn J., The fate of nitrogen functionalities in coal during pyrolysis and combustion. Fuel, 1995, 74(4): 507–516.
[37] Gong B., Buckley A., Lamb R., et al., XPS determination of the forms of nitrogen in coal pyrolysis chars. Surface and Interface Analysis, 1999, 28(1): 126–130.
[38] Pietrzak R., XPS study and physico-chemical properties of nitrogen-enriched microporous activated carbon from high volatile bituminous coal. Fuel, 2009, 88(10): 1871–1877.
