WANG Xueqing , WU Haifeng , MA Yusen , WANG Suilin , XU Rongji . Homogenization Function of Microchannel on Heat Absorber with Compound Parabolic Concentrator[J]. Journal of Thermal Science, 2022 , 31(6) : 2022 -2031 . DOI: 10.1007/s11630-022-1609-6

[1] Tian M., Su Y., Zheng H., et al., A review on the recent research progress in the compound parabolic concentrator (CPC) for solar energy applications. Renewable and Sustainable Energy Reviews, 2018, 82: 1272–1296.
[2] Zhang G., Wei J., Wang Z., et al., Investigation into effects of non-uniform irradiance and photovoltaic temperature on performances of photovoltaic/thermal systems coupled with truncated compound parabolic concentrators. Applied Energy, 2019, 250: 245–256.
[3] Meng H., The experimental and computational research on the intensity distribution of CPC absorber plate. Acta Energiae Solaris Sinica, 1996, 17(2): 151–156.
[4] Ding H., Research on transfer characteristics of internal CPC vacuum solar thermal collector. Northeast Electric Power University, Jilin, China, 2017. (in Chinese)
[5] He Y., Wang K., Du B., et al., Non-uniform characteristics of solar flux distribution in the concentrating solar power systems and its corresponding solutions: A review. Science China Press, 2016, 61(30): 3208–3237.
[6] Li G., Pei G., Su Y., et al., Design and investigation of a novel lens-walled compound parabolic concentrator with air gap. Applied Energy, 2014, 125: 21–27.
[7] Zhang H., Chen H., Han Y., et al., Experimental and simulation studies on a novel compound parabolic concentrator. Renewable Energy, 2018, 113: 784–794.
[8] Geng C., Xue Q., Zhang W., et al., Thermal stress analysis for absorber tube of parabolic trough solar collector under non-uniform heat flux. Journal of Engineering for Thermal Energy and Power, 2019, 34(3): 121–127.
[9] Peng H., Li M., Liang X., Thermal-hydraulic and thermodynamic performance of parabolic trough solar receiver partially filled with gradient metal foam. Energy, 2020, 211: 119046.
[10] Nabeel A., Imran A., Andrea C., et al., Assessment and evaluation of the thermal performance of various working fluids in parabolic trough collectors of solar thermal power plants under non-uniform heat flux distribution conditions. Energies, 2020, 13(15): 1–27.
[11] Ying Z., He B., Su L., et al., Convective heat transfer of molten salt-based nanofluid in a receiver tube with non-uniform heat flux. Applied Thermal Engineering, 2020, 181: 1–12.
[12] Akbarimoosavi S.M., Yaghoubi M., 3D thermal-structural analysis of an absorber tube of a parabolic trough collector and the effect of tube deflection on optical efficiency. Energy Procedia, 2014, 49: 2433–2443.
[13] Aldali Y., Muneer T., Henderson D., Solar absorber tube analysis: thermal simulation using CFD. International Journal of Low-Carbon Technologies, 2011, 8(1): 14–19.
[14] Robles A., Duong V., Martin A.J., et al., Aluminum minichannel solar water heater performance under year-round weather conditions. Solar Energy, 2014, 110: 356–364.
[15] Zhou J., Zhao X., Yuan Y., et al., Operational performance of a novel heat pump coupled with mini-channel PV/T and thermal panel in low solar radiation. Energy and Built Environment, 2020, 1(1): 50–59.
[16] Sharma N., Diaz G., Performance model of a novel evacuated-tube solar collector based on minichannels. Solar Energy, 2011, 85(5): 881–890.
[17] Widyolar B., Jiang L., Brinkley J., et al., Experimental performance of an ultra-low-cost solar photovoltaic- thermal (PVT) collector using aluminum minichannels and nonimaging optics. Applied Energy, 2020, 268:   1–11.
[18] Wang Z., Huang Z., Chen F., et al., Experimental investigation of the novel BIPV/T system employing micro-channel flat-plate heat pipes. Building Services Engineering Research and Technology, 2018, 39(5): 540–556.
[19] Li G., Zhang G., He W., et al., Performance analysis on a solar concentrating thermoelectric generator using the micro-channel heat pipe array. Energy Conversion and Management, 2016, 112: 191–198.
[20] Zhou J., Cao X., Zhang N., et al., Micro-channel heat sink: a review. Journal of Thermal Science, 2020, 29(6): 1431–1462.
[21] Rabl A., Optical and thermal properties of compound parabolic concentrators. Solar Energy, 1976, 18(6): 497–511.
[22] Smyth M., Zacharopoulos A., Eames P.C., An experimental procedure to determine solar energy flux distributions on the absorber of line-axis compound parabolic concentrators. Renewable Energy, 1999, 16(1–4): 761–764.
[23] Wang Y., Liu Q., Lei J., et al., A three-dimensional simulation of a parabolic trough solar collector system using molten salt as heat transfer fluid. Applied Thermal Engineering, 2014, 70(1): 462–476.
[24] Hawwash A., Rahman A.K.A., Nada S., et al., Numerical investigation and experimental verification of performance enhancement of flat plate solar collector using nanofluids. Applied Thermal Engineering, 2018, 130: 363–374.
[25] Li S., On the coefficient of standard deviation. China Statistics, 1988, (5): 32–33.
[26] Geedipalli S.S.R., Rakesh V., Datta A.K., Modeling the heating uniformity contributed by a rotating turntable in microwave ovens. Journal of Food Engineering, 2007, 82(3): 359–368.
[27] Zhang M., Ai Y., Zhang S., et al., Effect of different layout schemes on temperature uniformity of cold storage. Jiangsu Agricultural Sciences, 2020, 48(2): 210–221.