ZHU Linhui , ZENG Yibo , GUO Hang . Numerical Study and Performance Analyses of Mems-Based Particle Velocity Sensor with Combined Inclined Rib Pair[J]. Journal of Thermal Science, 2022 , 31(5) : 1503 -1517 . DOI: 10.1007/s11630-022-1500-5

[1] Wu C.H., Kang D., Chen P.H., Tai Y.C., MEMS thermal flow sensors. Sensors and Actuators a-Physical, 2016, 241: 135–144.
[2] Nguyen N.T., Micromachined flow sensors - a review. Flow Measurement and Instrumentation, 1997, 8(1): 7–16.
[3] Ho C.M., Tai Y.C., Micro-electro-mechanical-systems (MEMS) and fluid flows. Annual Review of Fluid Mechanics, 1998, 30: 579–612.
[4] Silvestri S., Schena E., Micromachined flow sensors in biomedical applications. Micromachines, 2012, 3(2): 225–243.
[5] De Bree H.E., Leussink P., Kotthorst T., Jansen H., Lammerink T.S.J., Elwenspoek M., The μ-flown: a novel device for measuring acoustic flows. Sensors and Actuators a-Physical, 1996, 54(3): 552–557.
[6] Mailly F., Giani A., Martinez A., Bonnot R., Temple-Boyer P., Boyer A., Micromachined thermal accelerometer. Sensors and Actuators a-Physical, 2003, 103(3): 359–363.
[7] Wu S.Y., Lin Q., Yuen Y., Tai Y.C., MEMS flow sensors for nano-fluidic applications. Sensors and Actuators a-Physical, 2001, 89(1–2): 152–158.
[8] Furjes P., Legradi G., Ducso C., Aszodi A., Barsony I., Thermal characterisation of a direction dependent flow sensor. Sensors and Actuators a-Physical, 2004, 115(2–3): 417–423.
[9] Tan Z., Shikida M., Hirota M., Sato K., Iwasaki T., Iriye Y., Experimental and theoretical study of an on-wall in-tube flexible thermal sensor. Journal of Micromechanics and Microengineering, 2007, 17(4): 679–686.
[10] Meng E., Li P.-Y., Tai Y.C., A biocompatible Parylene thermal flow sensing array. Sensors and Actuators a-Physical, 2008, 144(1): 18–28.
[11] Dalola S., Cerimovic S., Kohl F., Beigelbeck R., Schalko J., Ferrari V., Marioli D., Keplinger F., Sauter T., MEMS thermal flow sensor with smart electronic interface circuit. Ieee Sensors Journal, 2012, 12(12): 3318–3328.
[12] Dinh T., Phan H.P., Qamar A., Woodfield P., Nguyen N.T., Dao D.V., Thermoresistive effect for advanced thermal sensors: fundamentals, design considerations, and applications. Journal of Microelectromechanical Systems, 2017, 26(5): 966–986.
[13] Lammerink T.S.J., Tas N.R., Elwenspoek M., Fluitman J. H.J., Micro-liquid flow sensor. Sensors and Actuators a-Physical, 1993, 37(8): 45–50.
[14] Kohl F., Jachimowicz A., Steurer J., Glatz R., Kuttner J., Biacovsky D., Olcaytug F., Urban G., A micromachined flow sensor for liquid and gaseous fluids. Sensors and Actuators a-Physical, 1994, 41(1–3): 293–299.
[15] Mailly F., Giani A., Bonnot R., Temple-Boyer P., Pascal-Delannoy F., Foucaran A., Boyer A., Anemometer with hot platinum thin film. Sensors and Actuators a-Physical, 2001, 94(1–2): 32–38.
[16] van Baar J.J., Wiegerink R.J., Lammerink T.S.J., Krijnen G.J.M., Elwenspoek M., Micromachined structures for thermal measurements of fluid and flow parameters. Journal of Micromechanics and Microengineering, 2001, 11(4): 311–318.
[17] Svedin N., Kalvesten E., Stemme G., A lift force sensor with integrated hot-chips for wide range flow measurements. Sensors and Actuators a-Physical, 2003, 109(1–2): 120–130.
[18] Lammerink T.S.J., Tas N.R., Elwenspoek M., Fluitman J. H., Micro-liquid flow sensor. Sensors and Actuators A: Physical, 1993, 37–38(93): 45–50.
[19] Honschoten J.W.V., Krijnen G.J.M., Svetovoy V.B., Bree H.E.d., Elwenspoek M.C., Analytic model of a two-wire thermal sensor for flow and sound measurements. Journal of Micromechanics and Microengineering, 2004, 14(11): 1468–1477.
[20] Shen J., Liu B., Zhu L., Xu M., Zeng Y., Guo H., Numerical analysis of the performance of microflown with SHS configuration. Proc. Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA), 2017, pp: 283–287.
[21] Tariq A., Panigrahi P.K., Muralidhar K., Flow and heat transfer in the wake of a surface-mounted rib with a slit. Experiments in Fluids, 2004, 37: 701–719.
[22] Yang M.H., Yeh R.H., Hwang J.J., Forced convection in a channel with transverse fins. International Journal of Numerical Methods for Heat & Fluid Flow, 2012, 22(3–4): 306–322.
[23] Liu W., Liu Z., Guo Z., Physical quantity synergy in laminar flow field of convective heat transfer and analysis of heat transfer enhancement. Chinese Science Bulletin, 2009, 54(19): 3579–3586.
[24] Min C., Qi C., Wang E., Tian L., Qin Y., Numerical investigation of turbulent flow and heat transfer in a channel with novel longitudinal vortex generators. International Journal of Heat and Mass Transfer, 2012, 55(23–24): 7268–7277.
[25] Morini G.L., Viscous heating in liquid flows in micro-channels. International Journal of Heat and Mass Transfer, 2005, 48(17): 3637–3647.
[26] Manca O., Nardini S., Ricci D., A numerical study of nanofluid forced convection in ribbed channels. Applied Thermal Engineering, 2012, 37: 280–292.
[27] Mailly F., Martinez A., Giani A., Pascal-Delannoy F., Boyer A., Design of a micromachined thermal accelerometer: thermal simulation and experimental results. Microelectronics Journal, 2013, 34(4): 275–280.
[28] de Bree H.E., Raangs R., Druyvesteyn E., Sound intensity measurements with the Microflown sensor. Proceedings of the 33rd International Congress and Exposition on Noise Control Engineering, 2004, pp: 1–11.