[1] Islam M.A., Srinivasan K., Thu K., Saha B.B., Assessment of total equivalent warming impact (TEWI) of supermarket refrigeration systems. International Journal of Hydrogen Energy, 2017, 42(43): 26973–26983.
[2] Gullo P., Elmegaard B., Cortella G., Energy and environmental performance assessment of R744 booster super-market refrigeration systems operating in warm climates. International Journal of Refrigeration, 2016, 64: 61–79.
[3] Gullo P., Hafner A., Banasiak K., Transcritical R744 refrigeration systems for supermarket applications: Current status and future perspectives. International Journal of Refrigeration, 2018, 93: 269–310.
[4] Gullo P., Cortella G., Comparative exergoeconomic analysis of various transcritical R744 commercial refrigeration systems. Paper presented at: Proceedings of the 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portorož, Slovenia, 2016, 19th-23rd June, ID: 570.
[5] Gullo P., Cortella G., Thermodynamic performance evaluation of R744 supermarket refrigeration systems by employing advanced exergy analysis. Paper presented at: Proceedings of the 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portorož, Slovenia, 2016, 19th-23rd June, ID: 399.
[6] Gullo P., Elmegaard B., Cortella G., Advanced exergy analysis of a R744 booster refrigeration system with parallel compression. Energy, 2016, 107: 562–571.
[7] Sarkar J., Agrawal N., Performance optimization of trans-critical CO2 cycle with parallel compression economization. International Journal of Thermal Sciences, 2010, 49(5): 838–843.
[8] Chesi A., Esposito F., Ferrara G., Ferrari L., Experimental analysis of R744 parallel compression cycle. Applied Energy, 2014, 135: 274–285.
[9] Dubey A.M., Kumar S., Agrawal G.D., Numerical optimization of a transcritical CO2/propylene cascaded refrigeration-heat pump system with economizer in HT cycle. Indian Academy of Sciences, 2015, 40(2): 437–454.
[10] Mitsopoulos G., Syngounas E., Tsimpoukis D., Bellos E., Tzivanidis C., Anagnostatos S., Annual performance of a supermarket refrigeration system using different configurations with CO2 refrigerant. Energy Conversion and Management, 2019.
DOI: 10.1016/j.ecmx.2019.100006.
[11] Tsimpoukis D., Syngounas E., Petsanas D., Mitsopoulos G., Anagnostatos S., Bellos E., Tzivanidis C., Vrachopoulos M., Energy and environmental investigation of R744 all-in-one configurations for refrigeration and heating/air conditioning needs of a supermarket. Journal of Cleaner Production, 2021, 279(10): 123234. DOI: 10.1016/j.jclepro.2020.123234.
[12] Megdouli K., Tashtoush BM., Ezzaalouni Y., Nahdi E., Mhimid A., Kairouani L., Performance analysis of a new ejector expansion refrigeration cycle (NEERC) for power and cold: Exergy and energy points of view. Applied Thermal Engineering, 2017, 122: 39–48.
[13] Xu Y., Guo F., Song M., Jiang N., Wang Q., Chen G., Exergetic and economic analyses of a novel modified so-lar-heat-powered ejection-compression refrigeration cycle comparing with conventional cycle. Energy Conversion and Management, 2018, 168: 107–118.
[14] Ogorure O.J., Oko C.O.C., Diemuodeke E.O., Owebor K., Energy, exergy, environmental and economic analysis of an agricultural waste-to-energy integrated multigeneration thermal power plant. Energy Conversion and Management, 2018, 171: 222–240.
[15] Rashidi J., Yoo C., Exergy, exergo-economic, and exergy-pinch analyses (EXPA) of the kalina power-cooling cycle with an ejector. Energy, 2018, 155: 504–520.
[16] Bellos E., Tzivanidis C., Tsifis G., Energetic, Exergetic, Economic and Environmental (4E) analysis of a solar assisted refrigeration system for various operating scenarios. Energy Conversion and Management, 2017, 148: 1055–1069.
[17] Aminyavari M., Najafi B., Shirazi A., Rinaldi F., Exergetic, economic and environmental (3E) analyses, and multi-objective optimization of a CO2/NH3 cascade refrigeration system. Applied Thermal Engineering, 2014, 65(1–2): 42–50.
[18] Eini S., Shahhosseini H., Delgarm N., Lee M., Bahadori A., Multi-objective optimization of a cascade refrigeration system: Exergetic, economic, environmental, and inherent safety analysis. Applied Thermal Engineering, 2016, 107: 804–817.
[19] Gebreslassie B.H., Groll E.A., Garimella S.V., Multi-objective optimization of sustainable single-effect water/Lithium Bromide absorption cycle. Renewable Energy, 2012, 46: 100–110.
[20] Asgari S., Noorpoor A.R., Boyaghchi F.A., Parametric assessment and multi-objective optimization of an internal auto-cascade refrigeration cycle based on advanced exergy and exergoeconomic concepts. Energy, 2017, 125: 576–590.
[21] Sanaye S., Shirazi A., Four E analysis and multi-objective optimization of an ice thermal energy storage for air-conditioning applications. International Journal of Refrigeration, 2013, 36(3): 828–841.
[22] Jain V., Sachdeva G., Kachhwaha S.S., Patel B., Thermo-economic and environmental analyses based multi-objective optimization of vapor compression–absorption cascaded refrigeration system using NSGA-II technique. Energy Conversion and Management, 2016, 113: 230–242.
[23] Wang Z., Zhao H.X., Wang X.L., Han J.T., Lai Y.H., Thermodynamic performance evaluation of the CO2 parallel compression supermarket refrigeration system with a sub-cooler. International Journal of Thermal Science, 2020, 44: 6709–6724.
[24] Sawalha S., Piscopiello S., Karampour M., Manickam L., Rogstam J., Field measurements of supermarket refrigeration systems. Part II: Analysis of HFC refrigeration systems and comparison to CO2 trans-critical. Applied Thermal Engineering, 2017, 111: 170–182.
[25] Gullo P., Hafner A., Cortella G., Multi-ejector R744 booster refrigerating plant and air conditioning system integration - A theoretical evaluation of energy benefits for supermarket applications. International Journal of Refrigeration, 2017, 75: 164–176.
[26] Li L., Zha Y., Mapping relative humidity, average and extreme temperature in hot summer over China. The Science of the total environment, 2018, 615: 875–881.
[27] Bell IH., Wronski J., Quoilin S., Lemort V., Pure and pseudopure fluid thermo-physical property evaluation and the open-source thermo-physical property library coolprop. Industrial & Engineering Chemistry Research, 2014, 53(6): 2498–2508.
[28] Huang Z., Zhao H.X., Yu Z.T., Han J.T., Simulation and optimization of a R744 two-temperature supermarket refrigeration system with an ejector. International Journal of Refrigeration, 2018, 90: 73–82.
[29] Adrian B., George T., Michael M., Thermal Design and Optimization, 1996.
[30] Fazelpour F., Morosuk T., Exergoeconomic analysis of carbon dioxide trans-critical refrigeration machines. International Journal of Refrigeration, 2014, 38: 128–139.
[31] Najafi B., Najafi H., Idalik M.D., Computational fluid dynamics investigation and multi-objective optimization of an engine air-cooling system using genetic algorithm. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2011, 225(6): 1389–1398.
[32] Shahhosseini H.R., Farsi M., Eini S., Multi-objective optimization of industrial membrane SMR to produce syngas for Fischer-Tropsch production using NSGA-II and decision makings. Journal of Natural Gas Science and Engineering, 2016, 32: 222–238.
[33] Konak A., Coit D.W., Smith A.E., Multi-objective optimization using genetic algorithms: A tutorial. Reliability Engineering & System Safety, 2006, 91(9): 992–1007.
[34] Dimitri M., Correlating the chemical engineering plant cost index with macro-economic indicators. Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers, 2014, 92(2): 285–294.
[35] Badiru A.B., Omitaomu O.A., Computational Economic Analysis for Engineering and Industry. Taylor & Francis, 2007.
[36] Newnan D.G., Lavelle J.P., Eschenbach T.G., Engineering Economic Analysis. Oxford University Press, 2009.
[37] Pasqual J., Padilla E., Jadotte E., Technical note: equivalence of different profitability criteria with the net present value. International Journal of Production Economics, 2013, 142(1): 205–210.
