[1]
Majumdar A., Thermoelectric devices: Helping chips to keep their cool. Nature Nanotechnology, 2009, 4(4): 214–215.
[2]
Engelmann G., Laumen M., Gottschlich J., et al., Temperature controlled power semiconductor characterization using thermoelectric coolers. IEEE Transactions on Industry Applications, 2018, 54(3): 2598–2605.
[3]
Karampasis E., Papanikolaou N., Voglitsis D., et al., Active thermoelectric cooling solutions for airspace applications: the thermicool project. IEEE Access, 2017, 5: 2288–2299.
[4]
He R.R., Zhong H.Y., Cai Y., et al., Theoretical and experimental investigations of thermoelectric refrigeration box used for medical service. Procedia Engineering, 2017, 205: 1215–1222.
[5]
Shen L., Pu X., Sun Y., et al., A study on thermoelectric technology application in net zero energy buildings. Energy, 2016, 113: 9–24.
[6]
Rowe D.M., Thermoelectrics handbook: Macro to nano. CRC press, 2005.
[7]
Lee H.S., The Thomson effect and the ideal equation on thermoelectric coolers. Energy, 2013, 56(7): 61–69.
[8]
Chen W.H., Liao C.Y., Hung C.I., A numerical study on the performance of miniature thermoelectric cooler affected by Thomson effect. Applied Energy, 2012, 89(1): 464–473.
[9]
Lam T.T., Yuan S.W., Fong E., et al., Analytical study of transient performance of thermoelectric coolers considering the Thomson effect. International Journal of Thermal Sciences, 2018, 130: 435–448.
[10]
Snyder G. J., Toberer E. S., Khanna R., et al., Improved thermoelectric cooling based on the Thomson effect. Physical Review B, 2012, 86(4): 045202.
[11]
Zhou Y., Zhang T., Wang F., et al., Numerical study and optimization of a combined thermoelectric assisted indirect evaporative cooling system. Journal of Thermal Science, 2020, 29(5): 1345–1354.
[12]
Min G., Rowe D., Improved model for calculating the coefficient of performance of a Peltier module. Energy Conversion and Management, 2000, 41(2): 163–171.
[13]
Jeong E.S., A new approach to optimize thermoelectric cooling modules. Cryogenics, 2014, 59(1): 38–43.
[14]
Da Silva L.W., Kaviany M., Micro-thermoelectric cooler: interfacial effects on thermal and electrical transport. International Journal of Heat and Mass Transfer, 2004, 47(10–11): 2417–2435.
[15]
Su Y., Lu J., Huang B., Free-standing planar thin-film thermoelectric microrefrigerators and the effects of thermal and electrical contact resistances. International Journal of Heat and Mass Transfer, 2018, 117: 436–446.
[16]
Sun D., Shen L., Sun M., et al., An effective method of evaluating the device-level thermophysical properties and performance of micro-thermoelectric coolers. Applied Energy, 2018, 219: 93–104.
[17]
Qiu C., Shi W., Comprehensive modeling for optimized design of a thermoelectric cooler with non-constant cross-section: Theoretical considerations. Applied Thermal Engineering, 2020, 176: 115384.
[18]
Marchenko O.V., Performance modeling of thermoelectric devices by perturbation method. International Journal of Thermal Sciences, 2018, 129: 334–342.
[19]
Wang X., Yu J., Ma M., Optimization of heat sink configuration for thermoelectric cooling system based on entropy generation analysis. International Journal of Heat and Mass Transfer, 2013, 63: 361–365.
[20]
Wu Y., Zuo L., Chen J., et al., A model to analyze the device level performance of thermoelectric generator. Energy, 2016, 115: 591–603.
[21]
Melnikov A.A., Kostishin V.G., Alenkov V.V., Dimensionless model of a thermoelectric cooling device operating at real heat transfer conditions: maximum cooling capacity mode. Journal of Electronic Materials, 2017, 46(5): 2737–2745.
[22]
Zhang H.Y., A general approach in evaluating and optimizing thermoelectric coolers. International Journal of Refrigeration, 2010, 33(6): 1187–1196.
[23]
Cai Y., Liu D., Zhao F.Y., et al., Performance analysis and assessment of thermoelectric micro cooler for electronic devices. Energy Conversion and Management, 2016, 124: 203–211.
[24]
Pearson M.R., Lents C.E., Dimensionless optimization of thermoelectric cooler performance when integrated within a thermal resistance network. Journal of Heat Transfer, 2016, 138(8): 081301.
[25]
Zhou Y., Yu J., Design optimization of thermoelectric cooling systems for applications in electronic devices. International Journal of Refrigeration, 2012, 35(4): 1139–1144.
[26]
Lu X., Zhao D., Ma T., et al., Thermal resistance matching for thermoelectric cooling systems. Energy Conversion and Management, 2018, 169: 186–193.
[27]
Tan H., Fu H., Yu J., Evaluating optimal cooling temperature of a single-stage thermoelectric cooler using thermodynamic second law. Applied Thermal Engineering, 2017, 123: 845–851.
[28]
Gonzalez-Hernandez S., Unification of optimization criteria and energetic analysis of a thermoelectric cooler and heater. Physica A: Statistical Mechanics and its Applications, 2020, 555: 124700.
[29]
Guo X., Zhang H., Wang J., et al., A new hybrid system composed of high-temperature proton exchange fuel cell and two-stage thermoelectric generator with Thomson effect: Energy and exergy analyses. Energy, 2020, 195: 117000.
[30]
Zhao D., Tan G., A review of thermoelectric cooling: materials, modeling and applications. Applied Thermal Engineering, 2014, 66(1–2): 15–24.
[31]
Russel M.K., Ewing D., Ching C.Y., Characterization of a thermoelectric cooler based thermal management system under different operating conditions. Applied Thermal Engineering, 2013, 50(1): 652–659.
[32]
Sun D., Shen L., Chen H., et al., Modeling and analysis of the influence of Thomson effect on micro- thermoelectric coolers considering interfacial and size effects. Energy, 2020, 196: 117116.
[33]
Gong T., Gao L., Wu Y., et al., Transient thermal stress analysis of a thermoelectric cooler under pulsed thermal loading. Applied Thermal Engineering, 2019, 162: 114240.
