[1] Deng J., Peng C.X., He L.M., et al., Effects of dielectric barrier discharge plasma on the combustion performances of reverse-flow combustor in an aero-engine. Journal of Thermal Science, 2019, 28(5): 1035–1041.
[2] Cai H.K., Weng Z.J., Liao Y.D., et al., Research on an arc air-lubricating oil radiator equipped in internal surface of air intake for the aero engine. Journal of Thermal Science, 2020, 29(3): 687–696.
[3] Kang D., Kim D., Kalaskar V., et al., Experimental characterization of jet fuels under engine relevant conditions - Part 1: Effect of chemical composition on autoignition of conventional and alternative jet fuels. Fuel, 2019, 239: 1388–1404.
[4] Liu G.Z., Han Y.J., Wang L., et al., Solid deposits from thermal stressing of n-dodecane and chinese RP-3 jet fuel in the presence of several initiators. Energy & Fuels, 2009, 23(1–2): 356–365.
[5] Zhao T.B, Ren Z., Yang K., et al., Combustion and emissions of RP-3 jet fuel and diesel fuel in a single-cylinder diesel engine. Frontiers in Energy, 2021. DOI: 10.1007/s11708-021-0787-3.
[6] Ma H.A., Xie M.Z., Zeng W., et al., Experimental study on combustion characteristics of Chinese RP-3 kerosene. Chinese Journal of Aeronautics, 2016, 29(2): 375–385.
[7] Duan Y.Z., Han D., Li P.F., et al., Experimental study on injection and macroscopic spray characteristics of Ethyl Oleate, jet fuel and their blend on a diesel engine common rail system. Atomization and Sprays, 2015, 25(9): 777–793.
[8] Xu K.K., Meng H., Analyses of surrogate models for calculating thermophysical properties of aviation kerosene RP-3 at supercritical pressures. Science China Technological Sciences, 2015, 58(3): 510–518.
[9] Tao Z., Fu Y.C., Xu G.Q., et al., Thermal and element analyses for supercritical RP-3 surface coke deposition under stable and vibration conditions. Energy & Fuels, 2015, 29(3): 2006–2013.
[10] Zhang C.H., Li B., Rao F., et al., A shock tube study of the autoignition characteristics of RP-3 jet fuel. Proceedings of the Combustion Institute, 2015, 35: 3151–3158.
[11] Mao Y.B., Yu L., Wu Z.Y., et al., Experimental and kinetic modeling study of ignition characteristics of RP-3 kerosene over low-to-high temperature ranges in a heated rapid compression machine and a heated shock tube. Combustion and Flame, 2019, 203: 157–169.
[12] Zeng W., Li H.X., Chen B.D., et al., Experimental and kinetic modeling study of ignition characteristics of Chinese RP-3 Kerosene. Combustion Science and Technology, 2015, 187(3): 396–409.
[13] Xu J.Q., Guo J.J., Liu A.K., et al., Construction of autoignition mechanisms for the combustion of RP-3 surrogate fuel and kinetics simulation. Acta Physico-Chimica Sinica, 2015, 31(4): 643–652.
[14] Yan Y.W., Liu Y.C., Fang W., et al., A simplified chemical reaction mechanism for two-component RP-3 kerosene surrogate fuel and its verification. Fuel, 2018, 227: 127–134.
[15] Lobo P., Hagen D.E., Whitefield P.D., Comparison of PM emissions from a commercial jet engine burning conventional, biomass, and Fischer-Tropsch fuels. Environmental Science & Technology, 2011, 45(24): 10744–10749.
[16] Liu W., Liang X., Lin B.Y., et al., A comparative study on soot particle size distributions in premixed flames of RP-3 jet fuel and its surrogates. Fuel, 2020, 259: 116222.
[17] Liu W., Liang X., Li A., et al., Soot particle size distributions in premixed flames of RP-3 jet fuel and its distillates. Fuel, 2020, 267: 117244.
[18] He J.N., Xian L.Y., Li P., et al., Experimental study of the soot formation of RP-3 behind reflected shock waves. Fuel, 2017, 200: 47–53.
[19] Abdalla A.O.G., Ying Y.Y., Jiang B., et al., Comparative study on characteristics of soot from n-decane and RP-3 kerosene normal/inverse diffusion flames. Journal of Energy Institute, 2020, 93(1): 62–75.
[20] Abdalla A.O.G., Liu D., Zhang L.J., et al., Soot formation and evolution in RP-3 kerosene inverse diffusion flames: Effects of flow rates and dimethyl carbonate additions. Fuel, 2020, 273: 117732.
[21] Zhang C., Wang R.X., Hui X., et al., Nonlinear threshold sooting index prediction method for surrogate formulation emulating sooting characteristics: A case study using RP-3 jet fuels. Energy & Fuels, 2020, 34(8): 9990–9999.
[22] Bai Y.Q., Wang Y., Wang X.C., et al., Development of physical-chemical surrogate models and skeletal mechanism for the spray and combustion simulation of RP-3 kerosene fuels. Energy, 2021, 215: 119090.
[23] Duan Y.Z., Liu W., Huang Z., et al., An experimental study on spray auto-ignition of RP-3 jet fuel and its surrogates. Frontiers in Energy, 2021, 15: 396–404.
[24] Ren Z., Liu W., Huang Z., et al., Spray auto-ignition behaviors of diesel and jet fuel at reduced oxygen environments. Combustion Science and Technology, 2020, 194: 574–588.
[25] Wu H., Zhang F., Zhang Z., Fundamental spray characteristics of air-assisted injection system using aviation kerosene. Fuel, 2021, 286: 119420.
[26] Liu T., Fu W., Yi B., et al., Experimental investigations of kerosene sprays in pressurized evaporating environments. Proceedings of the Institute of Mechanical Engineers Part A-Journal of Power and Energy, 2019, 233(3): 413–427.
[27] Fan Y.C., Duan Y.Z., Liu W., et al., Effects of butanol blending on spray auto-ignition of gasoline surrogate fuels. Fuel, 2020, 260: 116368.
[28] Duan Y.Z., Liu W., Liang X., et al., Effects of branch structure of alkylbenzenes on spray auto-ignition of n-decane and alkylbenzenes blends. International Journal of Engine Research, 2021, 22 (5): 1636–1651.
[29] Guan Y.H., Liu W., Han D., Comparative study on spray auto-ignition of di-n-butyl ether and diesel blends at engine-like conditions. Journal of Energy Resources Technology, 2021, 143(4): 042302.
[30] Han D., Zhai J.Q., Duan Y.Z., et al., Macroscopic and microscopic spray characteristics of fatty acid esters on a common rail injection system. Fuel, 2017, 203: 370–379.
[31] Shi Z., Wu H., Li H., et al., Spray and evaporation characteristics of heavy-duty diesel engines at low temperatures. Chinese Internal Combustion Engine Engineering, 2020, 41(5): 1–8.
[32] Zhou X., Li T., Wang N., Modeling and experimental verification of transient liquid penetration of diesel evaporating spray. Chinese Internal Combustion Engine Engineering, 2020, 41(2): 8–14.
[33] Yi P., Li T., Wei Y.J., et al., Experimental and numerical investigation of low sulfur heavy fuel oil spray characteristics under high temperature and pressure conditions. Fuel, 2021, 286: 119327.
[34] Li T., Zhang X.Q., Wang B., et al., Characteristics of non-evaporating, evaporating and burning sprays of hydrous ethanol diesel emulsified fuels. Fuel, 2017, 191: 251–265.
[35] Zhou X.Y., Li T., Lai Z.Y., et al., Modeling diesel spray tip and tail penetrations after end-of-injection. Fuel, 2019, 237: 442–456.
[36] Zhou X.Y., Li T., Wei Y.J., et al., Scaling liquid penetration in evaporating sprays for different size diesel engines. International Journal of Engine Research, 2020, 21(9): 1662–1677.
[37] Sun Z.Y., Li G.X., Chen C., et al., Numerical investigation on effects of nozzle’s geometric parameters on the flow and the cavitation characteristics within injector’s nozzle for a high-pressure common-rail DI diesel engine. Energy Conversion and Management, 2015, 89: 843–861.
[38] Hiroyasu H., Kadota T., Arai M., Supplementary comments: fuel spray characterization in diesel engines. Combustion modeling in reciprocating engines. Prenum Press, New York, London, 1980, pp. 369–408.
[39] Arai M., Diesel spray penetration and air entrainment. Proceedings of the 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, China, 23–27 August, 2015, B2-1-002.
[40] Zama Y., Ochiai W., Furuhata T., et al., Experimental study on spray angle and velocity distribution of diesel spray under high ambient pressure conditions. Atomization Spray, 2011, 21(12): 989–1007.
