[1] Chellapandi P., Velusamy K., Thermal hydraulic issues and challenges for current and new generation FBRs. Nuclear Engineering and Design, 2015, 294: 202–225.
[2] Todreas Neil E., Thermal-hydraulic challenges in fast reactor design. Nuclear Technology, 2009, 167(1): 127–144.
[3] Chai X., Liu X., Xiong J., et al., CFD analysis of flow blockage phenomena in a LBE-cooled 19-pin wire-wrapped rod bundle. Nuclear Engineering and Design, 2019, 344: 107–121.
[4] Guo J., Huai X., Cheng K., The comparative analysis on thermal storage systems for solar power with direct steam generation. Renewable Energy, 2018, 115: 217–225.
[5] Frazer D., Stergar E., Cionea C., et al., Liquid metal as a heat transport fluid for thermal solar power applications. Energy Procedia, 2014, 49: 627–636.
[6] Angelucci M., Di Piazza I., Martelli D., Experimental campaign on the HLM loop NACIE-UP with instrumented wire-spaced fuel pin simulator. Nuclear Engineering and Design, 2018, 332: 137–146.
[7] Bassini S., Di Piazza I., Antonelli A., et al., In-loop oxygen reduction in HLM thermal-hydraulic facility NACIE-UP. Progress in Nuclear Energy, 2018, 105: 137–145.
[8] Di Piazza I., Angelucci M., Marinari R., et al., Heat transfer on HLM cooled wire-spaced fuel pin bundle simulator in the NACIE-UP facility. Nuclear Engineering and Design, 2016, 300: 256–267.
[9] Rosseel K., Van Tichelen K., Walsh S., et al., Investigation of the vacuum pump effect of free flowing liquid lead-bismuth eutectic. Nuclear Engineering and Design, 2014, 267: 61–70.
[10] Buchenau D., Eckert S., Gerbeth G., et al., Measurement technique developments for LBE flows. Journal of Nuclear Materials, 2011, 415(3): 396–403.
[11] Stieglitz R., Daubner M., Batta A., et al., Turbulent heat mixing of a heavy liquid metal flow in the MEGAPIE target geometry—The heated jet experiment. Nuclear Engineering and Design, 2007, 237(15–17): 1765–1785.
[12] Huang Q., Wu Y., Experimental study on natural circulation and gas injection enhanced circulation in KYLIN-II mixed circulation loop. NURETH-16, Chicago, IL, 2015.
[13] Crespo L.S., Muñoz F.J.M,. Briceño D.G., Short-term static corrosion tests in lead-bismuth. Journal of nuclear Materials, 2001, 296(1–3): 273–281.
[14] Rivai A.K., Takahashi M., Compatibility of surface-coated steels, refractory metals and ceramics to high temperature lead-bismuth eutectic. Progress in Nuclear Energy, 2008, 50(2–6): 560–566.
[15] Zeng X., Wang Q., Meng X., et al., Oxygen concentration measurement and control of lead-bismuth eutectic in a small, static experimental facility. Journal of Nuclear Science and Technology, 2020, 57(5): 590–598.
[16] Kays W.M. Turbulent Prandtl number—Where are we? Journal of Heat Transfer-Transactions of the ASME, 1994, 116(2): 284–295.
[17] Fazio C., Sobolev V.P., Aerts A., et al., Handbook on lead-bismuth eutectic alloy and lead properties, materials compatibility, thermal-hydraulics and technologies-2015 edition. Organisation for Economic Co-Operation and Development, 2015. pp. 617–642.
[18] Cheng X., Tak N., Investigation on turbulent heat transfer to lead-bismuth eutectic flows in circular tubes for nuclear applications. Nuclear Engineering and Design, 2006, 236(4): 385–393.
[19] Chen F., Huai X., Cai J., et al., Investigation on the applicability of turbulent-Prandtl-number models for liquid lead-bismuth eutectic. Nuclear Engineering and Design, 2013, 257: 128–133.
[20] He S., Wang M., Zhang J., et al., Numerical simulation of three-dimensional flow and heat transfer characteristics of liquid lead-bismuth. Nuclear Engineering and Technology, 2021, 53(6): 1834–1845.
[21] Bejan A., Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes. Journal of Applied Physics, 1996, 79(3): 1191–1218.
[22] Schmandt B., Herwig H., Diffuser and nozzle design optimization by entropy generation minimization. Entropy, 2011, 13(7): 1380–1402.
[23] Ji Y., Zhang H C., Yang X., et al., Entropy generation analysis and performance evaluation of turbulent forced convective heat transfer to nanofluids. Entropy, 2017, 19(3): 108.
[24] [24] Valujerdi M.M., Talebi S., Entropy generation study for a supercritical water reactor (SCWR). Progress in Nuclear Energy, 2020, 118: 103129.
DOI: 10.1016/j.pnucene.2019.103129.
[25] Yousofvand R., Derakhshan S., Ghasemi K., et al., MHD transverse mixed convection and entropy generation study of electromagnetic pump including a nanofluid using 3D LBM simulation. International Journal of Mechanical Sciences, 2017, 133: 73–90.
[26] Ni S., Zhao D., Becker S., et al., Thermodynamics and entropy generation studies of a T-shaped micro-combustor: effects of porous medium and ring-shaped ribs. Applied Thermal Engineering, 2020, 175: 115374.
[27] Ni S., Zhao D., Sun Y., et al., Numerical and entropy studies of hydrogen-fuelled micro-combustors with different geometric shaped ribs. International Journal of Hydrogen Energy, 2019, 44(14): 7692–7705.
[28] Xu G.Q., Zhang H.C. A concept of heat dissipation coefficient for thermal cloak based on entropy generation approach. AIP Advances, 2016, 6(9): 095107.
[29] Li Y.Y., Zhang H.C., Sun M.Y., et al., Environmental response of 2D thermal cloak under dynamic external temperature field. Entropy, 2020, 22(4): 461.
[30] Yu H.Y., Zhang H.C., Buahom P., et al., Prediction of thermal conductivity of micro/nano porous dielectric materials: Theoretical model and impact factors. Energy, 2021, 233: 121140.
[31] Launder B.E., Spalding D.B., The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering, 1974, 3: 269–289.
[32] Menter F.R., Improved two-equation k-ω turbulence models for aerodynamic flows. NASA Technical Report N, 1992, 93: 22809.
[33] Menter F.R., Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal, 1994, 32(8): 1598–1605.
[34] Könözsy L., A new hypothesis on the anisotropic Reynolds stress tensor for turbulent flows. Springer, 2019. pp. 57–66.
[35] Ni S., Zhao D., Zhu X., Heat transfer and entropy production evaluation on premixed hydrogen/air-fuelled micro-combustors with internal threads. Fuel, 2021, 303: 121325.
[36] Kock F., Herwig H., Local entropy production in turbulent shear flows: a high-Reynolds number model with wall functions. International Journal of Heat and Mass Transfer, 2004, 47(10–11): 2205–2215.
[37] ANSYS Flunet 19.2 Theroy Guide.
[38] Lubarsky B. Experimental investigation of forced-convection heat-transfer characteristics of lead-bismuth eutectic. 1951, pp. 7–20.
[39] Paoletti S., Rispoli F., Sciubba E., Calculation of exergetic losses in compact heat exchanger passages. ASME AES, 1989, 10(2): 21–29.
