[1]
Dong J., Zhou T., Wu X., Zhang J., et al., Coupled heat transfer simulation of the spiral water wall in a double reheat ultra-supercritical boiler. Journal of Thermal Science, 2018, 27(6): 592–601.
[2]
Bugge J., Kj er S., Rudolph B., High-efficiency coal-fired power plants development and perspectives. Energy, 2014, 31(10): 1437–1445.
[3]
Zhao G.L., Chen S., Greenhouse gas emissions reduction in China by cleaner coal technology towards 2020. Energy Strategy Reviews, 2015, 7: 63–70.
[4]
Liu R., Xiao P., Zhong L., et al., Research progress of advanced 700°C ultra-supercritical coal-fired power generation technology. Thermal Power Generation, 2017, 46(9): 1–7. (in Chinese)
[5]
Liu Y., Comparison and analysis of the superheating degree utilization versions for a ultra-supercritical unit under the off-design operating conditions. Journal of Engineering for Thermal Energy and Power, 2016, 31(1): 71–75. (in Chinese)
[6]
Liu H., Wang Y., Zhang W., et al., Coupled modeling of combustion and hydrodynamics for a 1000 MW double-reheat tower-type boiler. Fuel, 2019, 255: 1–10.
[7]
Wan L., Yang D., Zhou X., et al., Thermal-hydraulic calculation and analysis on evaporator system of a 1000 MW ultra-supercritical pulverized combustion boiler with double reheat. Journal of Thermal Science, 2021, 30(3): 807–816.
[8]
Duan L., Sun J., Wang Z., Performance comparison of thermal energy utilization schemes of the extractions superheating degree for a double reheat coal-fired power plant. Journal of Engineering Thermophysics, 2019, 40(12): 2757–2762. (in Chinese)
[9]
Duan L., Sun J., Design optimization of ultra-supercritical reheating coal-fired power plant integrated with BEST. Journal of North China Electric Power University, 2019, 46(3): 80–89. (in Chinese)
[10]
Yang H., YU Y., FAN S., et al., Application and analysis of echelon cycle in ultra-supercritical 1000 MW unit. Thermal Power Generation, 2019, 48(12): 129–133. (in Chinese)
[11]
Yang M., Zhou Y., Wang D., et al., Thermodynamic cycle analysis and optimization to improve efficiency in a 700°C ultra-supercritical double reheat system. Journal of Thermal Analysis and Calorimetry, 2020, 141: 83–94.
[12]
Yang M., Duan L., Tong Y., Design and performance analysis of new ultra-supercritical double reheat coal-fired power generation systems. Energies, 2021, 14: 238.
[13]
Li Y., Zhou L., Xu G., et al., Thermodynamic analysis and optimization of a double reheat system in an ultra-supercritical power plant. Energy, 2014, 74: 202– 214.
[14]
Fu W., Shi Y., Li J., et al., Arrangement of outer steam cooler for a 1000 MW double reheat ultra-supercritical unit. Journal of Power Engineering, 2017, 37(6): 489–494. (in Chinese)
[15]
Zhou Y., Yang M., Wang D., Optimization of 1000 MW high ultra-supercritical double-reheat system. Proceedings of the CSEE, 2018(38): 137–141. (in Chinese)
[16]
Xu G., Zhou L., Zhao S., et al., Optimum superheat utilization of extraction steam in double reheat ultra-supercritical power plants. Applied Energy, 2015, 160: 863–872.
[17]
Zhao Z, Su S, Si N, et al., Exergy analysis of the turbine system in a 1000 MW double reheat ultra-supercritical power plant. Energy, 2017, 119: 540–548.
[18]
Fan Ch., Pei D., Wei H., A novel cascade energy utilization to improve efficiency of double reheat Cycle. Energy Conversion and Management, 2018, 171: 1388–1396.
[19]
Yang M., Duan L., Liu Q., et al., Optimization design of a new ultra-supercritical double reheat coal-fired power generation system. Journal of Engineering Thermophysics, 2020, 41(09): 2119–2128.
[20]
Shui Y., Liu Q., Zhang L., et al., Parametric optimization of a regenerative system for a 650°C Ultra-supercritical steam turbine. Journal of Engineering Thermophysics, 2020, 41(1): 89–94. (in Chinese)
[21]
Lin X., Li Q., Wang L., et al., Thermo-economic analysis of typical thermal systems and corresponding novel system for a 1000 MW single reheat ultrasupercritical thermal power plant. Energy, 2020, 201: 117560.
[22]
Song Z., Consumption rate analysis: theory and practice. Proceedings of the CSEE, 1992(4): 15–21. (in Chinese)
[23]
Diao M., Tang C., Zhu X., et al., Thermoeconomic and techno-economic analysis on an ultra-supercritical unit with double-reheat cycle. Thermal Power Generation, 2017, 8: 23–29. (in Chinese)
