[1] Black J., Cost and performance baseline for fossil energy plants Volume 1: Bituminous coal and natural gas to electricity. Final report (2nd ed), National Energy Technology Laboratory (2010 Nov.) Report No: DOE20101397, 2010.
[2] Zhang C., Yang Y., Fan L., et al., Numerical study on operating characteristics of self-driven total heat recovery system for wet-hot flue gas. Applied Thermal Engineering, 2020, 173: 115223.
[3] Cheng Y.F., Zheng G.J., Wei C., et al., Reactive nitrogen chemistry in aerosol water as a source of sulfate during haze events in China. Science Advances, 2016, 2(12): e1601530.
[4] Wu W., Li X., You T., Advances in waste heat and renewable energy utilization. Absorption Heating Technologies, Springer, 2019, pp. 237–259.
[5] Ostrowski P., Szelejewski F., Estimation of the coal fired heat plant energy efficiency increase after heat recovery from flue gas cooling down below the dew point. E3S Web of Conferences, EDP Sciences, 2019, 82: 01003.
[6] Yang B., Jiang Y., Fu L., et al., Full-open absorption heat pump for total heat recovery of flue gas. Journal of Southeast University (Natural Science Edition), 2018, 48(5): 789–793.
[7] Elberry M.F., Elsayed A.A., Teamah M.A., et al., Performance improvement of power plants using absorption cooling system. Alexandria Engineering Journal, 2018, 57(4): 2679–2686.
[8] Fan W., Theoretical analysis of open cycle absorption heat transfer and experiment on absorber and generator. Institute of Engineering Thermophysics, Chinese Academy of Sciences, China, 2008.
[9] Copen J., Sullivan T., Folkedahl B., Principles of flue gas water recovery system. The Power-Gen International Conference, December 6–8, Las Vagas NV, 2005.
[10] Ibarra-Bahena J., Romero R.J., Performance of different experimental absorber designs in absorption heat pump cycle technologies: A review. Energies, 2014, 7(2): 751–766.
[11] Ren C.Q., Tu M., Wang H.H., An analytical model for heat and mass transfer processes in internally cooled or heated liquid desiccant-air contact units. International Journal of Heat and Mass Transfer, 2007, 50(17): 3545–3555.
[12] Khan A.Y., Cooling and dehumidification performance analysis of internally-cooled liquid desiccant absorbers. Applied Thermal Engineering, 1998, 18(5): 265–281.
[13] Wang X., Cai W., Lu J., et al., A hybrid dehumidifier model for real-time performance monitoring, control and optimization in liquid desiccant dehumidification system. Applied Energy, 2013, 111: 449–455.
[14] Zhang L., Hihara E., Saikawa M., Combination of air-source heat pumps with liquid desiccant dehumidification of air. Energy Conversion and Management, 2012, 57: 107–116.
[15] Ge G., Xiao F., Xu X., Model-based optimal control of a dedicated outdoor air-chilled ceiling system using liquid desiccant and membrane-based total heat recovery. Applied Energy, 2011, 88(11): 4180–4190.
[16] Bansal P., Jain S., Moon C., Performance comparison of an adiabatic and an internally cooled structured packed-bed dehumidifier. Applied Thermal Engineering, 2011, 31(1): 14–19.
[17] Khan A.Y., Martinez J.L., Modelling and parametric analysis of heat and mass transfer performance of a hybrid liquid desiccant absorber. Energy Conversion and Management, 1998, 39(10): 1095–1112.
[18] Gommed K., Grossman G., Ziegler F., Experimental investigation of a LiCl-water open absorption system for cooling and dehumidification. Journal of Solar Energy Engineering, 2004, 126(2): 710–715.
[19] Chen X., Su Y., Reay D., et al., Recent research developments in polymer heat exchangers–A review. Renewable and Sustainable Energy Reviews, 2016, 60(1): 1367–1386.
[20] Gandhidasan P., Ullah M.R., Kettleborough C., Analysis of heat and mass transfer between a desiccant-air system in a packed tower. Journal of Solar Energy Engineering, 1987, 109(2): 89–93.
[21] Islam M.R., Wijeysundera N., Ho J., Simplified models for coupled heat and mass transfer in falling-film absorbers. International Journal of Heat and Mass Transfer, 2004, 47(2): 395–406.
[22] Yoon J.-I., Phan T.-T., Moon C.-G., et al., Numerical study on heat and mass transfer characteristic of plate absorber. Applied Thermal Engineering, 2005, 25(14–15): 2219–2235.
[23] Chilton T.H., Colburn A.P., Mass transfer (absorption) coefficients prediction from data on heat transfer and fluid friction. Industrial & Engineering Chemistry, 1934, 26(11): 1183–1187.
[24] Serth R.W., Lestina T.G., 5-Design of shell-and-tube heat exchangers. Serth R.W., Lestina T.G., Process Heat Transfer (Second Edition). Boston, Academic Press, 2014, pp. 151–197.
[25] Yih S.-M., Chen K.-Y., Gas absorption into wavy and turbulent falling liquid films in a wetted-wall column. Chemical Engineering Communications, 1982, 17(1–6): 123–136.
[26] Shah R.K., London A.L. Chapter V - Circular duct. Laminar flow forced convection in ducts. Academic Press, 1978, pp. 78–152.
[27] Siddig-Mohammed B., Watson F., Holland F., Study of the operating characteristics of a reversed absorption heat pump system (heat transformer). Chemical Engineering Research and Design, 1983, 61: 283–289.
[28] Yin Y., Zheng B., Chen T., et al., Investigation on coupled heat and mass transfer coefficients between compressed air and liquid desiccant in a packed dryer. International Journal of Heat and Mass Transfer, 2016, 93: 1218– 1226.
