[1]
Song J.H., Kim H.Y., Kim H., et al., Heat transfer characteristics of a supercritical fluid flow in a vertical pipe. The Journal of Supercritical Fluids, 2008, 44(2): 164–171.
[2]
Sharabi M.B., Ambrosini W., He S., Prediction of unstable behaviour in a heated channel with water at supercritical pressure by CFD models. Annals of Nuclear Energy, 2008. 35(5): 767–782.
[3]
Loewenberg M.F., Laurien E., Class A., et al., Supercritical water heat transfer in vertical tubes: A look-up table. Progress in Nuclear Energy, 2008. 50(2–6): 532–538.
[4]
He D.Q., Yang Y.J., Zhou J.X., Chen Y.J., Optimal control of metro energy conservation based on regenerative braking: a complex model study of trajectory and overlap time. IEEE ACCESS, 2019, 7(1): 68342–68358.
[5]
Lee S.M., Kim K.Y., Comparative study on performance of a zigzag printed circuit heat exchanger with various channel shapes and configurations. Heat and Mass Transfer, 2013, 49(7):1021–1028.
[6]
Kim I.H., No H.C., Lee J.I., et al., Thermal hydraulic performance analysis of the printed circuit heat exchanger using a helium test facility and CFD simulations. Nuclear Engineering and Design, 2009, 239(11): 2399–2408.
[7]
Kim I.H., Hee Cheon N.O., Thermal hydraulic performance analysis of a printed circuit heat exchanger using a helium-water test loop and numerical simulations. Applied Thermal Engineering, 2011, 31(17–18): 4064– 4073.
[8]
Kim I.H., No H.C., Thermal-hydraulic physical models for a Printed Circuit Heat Exchanger covering He, He-CO2 mixture, and water working mediums using experimental data and CFD. Experimental Thermal and Working Medium Science, 2013, 48: 213–221.
[9]
Baik S., Kim S.G., Lee J., Lee J.I., Study on CO2-water printed circuit heat exchanger performance operating under various CO2 phases for S-CO2 power cycle application. Applied Thermal Engineering, 2017, 113: 1536–1546.
[10]
Ngo T.L., Kato Y.K., Nikitin K., Tsuzuki N., New printed circuit heat exchanger with S-shaped fins for hot water supplier. Experimental Thermal and Working Medium Science, 2013, 48: 213–221.
[11]
Chen F., Zhang L.S., Huai X.L., Li J.F., Zhang H., Liu Z.G., Comprehensive performance comparison of airfoil fin PCHEs with NACA OOXX series airfoil. Nuclear Engineering and Design, 2017, 315: 42–50.
[12]
Chu W.X., Li X.H., Ma T., et al., Study on hydraulic and thermal performance of printed circuit heat transfer surface with distributed airfoil fins. Applied Thermal Engineering, 2017, 114: 1309–1318.
[13]
Khan H.H., M A.A., Sharma A., et al., Thermal-hydraulic characteristics and performance of 3D wavy channel based printed circuit heat exchanger. Applied Thermal Engineering, 2015, 87: 519–528.
[14]
Ma T., Li L., Xu X.Y., et al., Study on local thermal-hydraulic performance and optimization of zigzag-type printed circuit heat exchanger at high temperature. Energy Conversion and Management, 2015, 104: 55–66.
[15]
Pu L., Qu Z., Bai Y., et al., Thermal performance analysis of intermediate working medium vaporizer for liquefied natural gas. Applied Thermal Engineering, 2014, 65(1–2): 564–574.
[16]
Zhao Z.C., Zhang X., Zhao K., Jiang P.P., Chen Y.P., Numerical investigation on heat transfer and flow characteristics of supercritical nitrogen in a straight channel of printed circuit heat exchanger. Applied Thermal Engineering, 2017, 126: 717–729.
[17]
Afanasyev V.N., Chudnovsky Y.P., Leontiev A.I., et al., Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate. Experimental Thermal and Working Medium Science, 1993, 7(1): 1–8.
[18]
Burgess N.K., Oliveira M.M., Ligrani P.M., Nusselt number behavior on deep dimpled surfaces within a channel. Journal of Heat Transfer, 2003, 125(1): 11–18.
[19]
Moon H.K., Connell T., Glezer B., Channel height effect on heat transfer and friction in a dimpled passage. Journal of Engineering for Gas Turbines and Power, 2000, 122(2): 307–313.
[20]
Chyu M.K., Yu Y., Ding H., Heat transfer enhancement in rectangular channels with concavities. Journal of Enhanced Heat Transfer, 1999, 6(6): 429–439.
[21]
Mahmood G.I., Ligrani P.M., Heat transfer in a dimpled channel: combined influences of aspect ratio, temperature ratio, Reynolds number, and flow structure. International Journal of Heat and Mass Transfer, 2002, 45(10): 2011–2020.
[22]
Park J., Desam P.R., Ligrani P.M., Numerical predictions of flow structure above a dimpled surface in a channel. Numerical Heat Transfer, Part A: Applications, 2004, 45(1): 1–20.
[23]
Elyyan M.A., Tafti D.K., Large eddy simulation investigation of flow and heat transfer in a channel with dimples and protrusions. Journal of Turbomachinery, 2008, 130(4): 041016.
[24]
Wee H., Zhang Q., Ligrani P.M., et al., Numerical predictions of heat transfer and flow characteristics of heat sinks with ribbed and dimpled surfaces in laminar flow. Numerical Heat Transfer, Part A: Applications, 2008, 53(11): 1156–1175.
[25]
Won S.Y., Ligrani P.M., Numerical predictions of flow structure and local Nusselt number ratios along and above dimpled surfaces with different dimple depths in a channel. Numerical Heat Transfer, Part A: Applications, 2004, 46(6): 549–570.
[26]
Ligrani P.M., Harrison J.L., Mahmmod G.I., et al., Flow structure due to dimple depressions on a channel surface. Physics of Working Mediums, 2001, 13(11): 3442–3451.
[27]
Chen Y., Liu Z., He D., Numerical study on enhanced heat transfer and flow characteristics of supercritical methane in a square mini-channel with dimple array. International Journal of Heat and Mass Transfer, 2020, 158: 119729.
[28]
Wang K., Xu X., Wu Y., et al., Numerical investigation on heat transfer of supercritical CO2 in heated helically coiled tubes. The Journal of Supercritical Fluids, 2015, 99: 112–120.
[29]
McLinden M., Klein S.A., Lemmon E.W., Peskin A.P., NIST Thermodynamic and Transport Properties of Refrigerants and Refrigerant Mixtures-REFPROP, Version 3.01, National Institute of Standards and Technology, USA.
[30]
Kim T.H., Kwon J.G., Yoon S.H., et al., Numerical analysis of air-foil shaped fin performance in printed circuit heat exchanger in a supercritical carbon dioxide power cycle. Nuclear Engineering and Design, 2015, 288: 110–118.
[31]
Rohsenow W.M., Hartnett J.P., Handbook of Heat Transfer, McGraw-Hill Book, New York, 1975.
[32]
Webb R.L., Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design. International Journal of Heat and Mass Transfer, 1981, 24: 715–726.
[33]
He S., Jiang P.X., Xu Y.J., Shi R.F., Kima W.S., Jacksonc J.D., A computational study of convection heat transfer to CO2 at supercritical pressures in a vertical mini tube. International Journal of Thermal Sciences, 2005, 44: 521–530.
[34]
Du Z., Lin W., Gu A., Numerical investigation of cooling heat transfer to supercritical CO2 in a horizontal circular tube. Journal of Supercritical Fluids, 2010, 55(1): 116–121.
