[1] Sun D., Li Z., Dong X. Sun X., Calibration of S-duct swirl distortion based on vortex identification methods. Journal of Thermal Science, 2022, 31(1): 35–46.
[2] Saravanamuttoo H.I.H., Rogers G.F.C., Cohen H., Straznicky P.V., Gas turbine theory, Sixth Edition, Pearson College Div Publisher, 2008.
[3] Pearson H., McKenzie A.B., Wakes in axial compressors. Journal of the Royal Aeronautical Society, 1959, 63: 415–416.
[4] Reid C., The response of axial flow compressors to intake flow distortion. Proceedings of the ASME 1969 Gas Turbine Conference and Products Show, Ohio, USA 1969.
[5] Stenning A.H., Inlet distortion effects in axial compressors. Journal of Fluids Engineering, 1980, 102(1): 7–13.
[6] Lesser A., Niehuis R., Transonic axial compressors with total pressure inlet flow field distortions. Proceedings of the ASME Turbo Expo 2014, Düsseldorf, Germany, 2014.
[7] Liu Y., Li J., Du J., Zhang H., Nie C., Stall warning strategy based on fast wavelet analysis in a multistage axial flow compressor. ASME Journal of Engineering Gas Turbines and Power, 2022, 144(4): 044501.
[8] Sun P., Gao H., Zhong J., Yang M., Study on the influence of total pressure distortion on end wall flow field in a supersonic compressor. Proceedings of the ASME Turbo Expo 2013, San Antonio, Texas, USA, 2013.
[9] Ramakrishna P.V., Govardhan M., Stall characteristics and tip clearance effects in forward swept axial compressor rotors. Journal of Thermal Science, 2009, 18(1): 40−47.
[10] Powrie H., Novis A., Gas path debris monitoring for F-35 Joint Strike Fighter propulsion system PHM. 2006 IEEE Aerospace Conference, Big Sky, USA, 2006.
[11] Gunn E.J., Hall C.A., Aerodynamics of boundary layer ingesting fans. Proceedings of the ASME Turbo Expo 2014, Düsseldorf, Germany, 2014.
[12] Davis M., Beale D., Sheoran Y., Integrated test and evaluation techniques as applied to an inlet swirl investigation using the F109 gas turbine engine. Proceedings of the ASME Turbo Expo 2008, Berlin, Germany, 2008.
[13] Dong X., Sun D., Li F., Jin D., Gui X., Sun X., Effects of stall precursor-suppressed casing treatment on a low-speed compressor with swirl distortion. ASME Journal of Fluids Engineering, 2018, 140(9): 091101.
[14] Davis M., Hale A., A parametric study on the effects of inlet swirl on compression system performance and operability using numerical simulations. Proceedings of the ASME Turbo Expo 2007, Montreal, Canada, 2007.
[15] Hall D.K., Analysis of civil aircraft propulsion with boundary layer ingestion. Ph.D thesis, Massachusetts Institute of Technology, 2015.
[16] Gunn E.J., Hall C.A., Nonaxisymmetric stator design for boundary layer ingesting fans. Journal of Turbomachinery, 2019, 141(7): 071010.
[17] Lu H.N., Yang Z., Pan T.Y., Li Q.S., Non-uniform stator loss reduction design strategy in a transonic axial-flow compressor stage under inflow distortion. Aerospace Science and Technology, 2019, 92: 347–362.
[18] Kumar S., Turner M.G., Siddappaji K., Celestina M., Aerodynamic design system for non-axisymmetric boundary layer ingestion fans. Proceedings of the ASME Turbo Expo 2018, Oslo, Norway, 2018.
[19] ANSYS Inc., ANSYS CFX-Solver theory guide, Release 15.0. Canonsburg: ANSYS Inc, 2013.
[20] Menegozzo L., Benini E., Meanline calculation of surge margin loss due to inlet flow distortion. Proceedings of the ASME Turbo Expo 2020, Virtual, Online, 2020.
[21] Pachidis V., Pilidis P., Templalexis I., Alexander T., Kotsiopoulos P., Prediction of engine performance under compressor inlet flow distortion using streamline curvature. Journal of Engineering for Gas Turbines and Power, 2007, 129(1): 97–103.
[22] Lobo B., Zori L., Galpin P., Holmes W., Efficient modeling strategy of an axial compressor fan-stage under inlet distortion. Proceedings of the ASME Turbo Expo 2016, Seoul, South Korea, 2016.
[23] Mehdi A., Effect of swirl distortion on gas turbine perability. PhD Thesis, Cranfield University, 2014.
[24] Guo J., Hu J., Wang X., Tu B., Efficient modeling of an axial compressor with swirl distortion. Journal of Thermal Science, 2021, 30(4): 1421–1434.
[25] Li Y., Li J., Du J., Liu Y., Zhang M., Zhang H.W., Optimized casing treatment to improve stall margin under circumferential pressure distortion in a high-speed axial flow fan. Proceedings of the ASME Turbo Expo 2023, Massachusetts, USA, 2023.
[26] Du J., Liu L., Nan X., Lin F., Chen J., Nie C., The dynamics of prestall process in an axial low-speed compressor with single circumferential casing groove, Proceedings of the ASME Turbo Expo 2013, San Antonio, USA, 2013.
[27] Peacock J.A., Fourier analysis. Scientific lecture, 2013. https://www.roe.ac.uk/japwww/teaching/fourier/fourier_lectures_part1.pdf
[28] Ba D., Zhang Q., Du J., Li Z., Zhang H., Nie C., Design optimization of axial slot casing treatment in a highly-loaded mixed-flow compressor. Aerospace Science and Technology, 2020, 107: 106262.
