[1] Li J., Liu Q., Forecasting of short-term photovoltaic power generation using combined interval type-2 Takagi-Sugeno-Kang fuzzy systems. International Journal of Electrical Power & Energy Systems, 2022, 140: 108002.
[2] Tabar M.R.R., Anvari M., Lohmann G., et al., Kolmogorov spectrum of renewable wind and solar power fluctuations. European Physical Journal-Special Topics, 2014, 223(12): 2637–2644.
[3] Shi R., Fan X., He Y., Comprehensive evaluation index system for wind power utilization levels in wind farms in China. Renewable & Sustainable Energy Reviews, 2017, 69: 461–471.
[4] Ren G., Wan J., Liu J., et al., Analysis of wind power intermittency based on historical wind power data. Energy, 2018, 150: 482–492.
[5] Zhu S., Hui J., Lyu Q., et al., Experimental study on pulverized coal combustion preheated by a circulating fluidized bed: Preheating characteristics for peak shaving. Fuel, 2022, 324: 124684.
[6] Gonzalez-Salazar M.A., Kirsten T., Prchlik L., Review of the operational flexibility and emissions of gas- and coal-fired power plants in a future with growing renewables. Renewable and Sustainable Energy Reviews, 2018, 82: 1497–1513.
[7] Gu Y., Xu J., Chen D., et al., Overall review of peak shaving for coal-fired power units in China. Renewable and Sustainable Energy Reviews, 2016, 54: 723–731.
[8] Lockwood T., Techno-economic analysis of PC versus CFB combustion technology. IEA Clean Coal Centre, 2013.
[9] Xie H., Ren S., Xie Y., Jiao X., Development opportunities of the coal industry towards the goal of carbon neutrality. Journal of China Coal Society, 2021, 46(7): 2197–2211. (in Chinese)
[10] Peters J., Alobaid F., Epple B., Operational flexibility of a CFB furnace during fast load change—Experimental measurements and dynamic model. Applied Sciences, 2020, 10(17): 5972.
[11] Basu P., Combustion of coal in circulating fluidized-bed boilers: A review. Chemical Engineering Science, 1999, 54(22): 5547–5557.
[12] Henderson C., Increasing the flexibility of coal-fired power plants. IEA Clean Coal Centre, 2014.
[13] Cai J., Shan L., Wang Z., et al., Variable load characteristics of a supercritical 350 MW circulating fluidized bed boiler. Thermal Power Generation, 2020, 49(9): 98–103, 108. (in Chinese)
[14] Alobaid F., Peters J., Epple B., Experimental measurements for Polish lignite combustion in a 1 MWth circulating fluidized bed during load changes. Energy, 2021, 228: 120585.
[15] Zhang P., Fan H., Yu Y., et al., Performance of 350 MW supercritical circulating fluidized bed boiler under different loads. Clean Coal Technology, 2021, 27(6): 93–99. (in Chinese)
[16] Zhang S., Zhang S., Zhang J., et al., Performance research on deep peak regulation with flue gas recirculation in a 330 MW CFB boiler. Clean Coal Technology, 2021, 27(01): 291–298. (in Chinese)
[17] Huttunen M., Peltola J., Kallio S., et al., Analysis of the processes in fluidized bed boiler furnaces during load changes. Energy Procedia, 2017, 120: 580–587.
[18] Gao M., Hong F., Liu J., Investigation on energy storage and quick load change control of subcritical circulating fluidized bed boiler units. Applied Energy, 2017, 185: 463–471.
[19] Gao M., Hong F., Liu J., Chen F., Investigation on the energy conversion and load control of supercritical circulating fluidized bed boiler units. Journal of Process Control, 2018, 68: 14–22.
[20] Hong F., Chen J., Wang R., et al., Realization and performance evaluation for long-term low-load operation of a CFB boiler unit. Energy, 2021, 214: 118877.
[21] Zhang F., Xue Y., Li D., et al., On the flexible operation of supercritical circulating fluidized bed: Burning carbon based decentralized active disturbance rejection control. Energies, 2019, 12(6): 1132.
[22] Liu Z., Ma S., Pan X., Chen J., Experimental study on the load response rate under the dynamic combined combustion of PC coal and CFB coal in a CFB boiler. Fuel, 2019, 236: 445–451.
[23] Xian X., Du Y., Zhang G., Combustion characteristics of coal blending by TG-DTG/DTA. Coal Conversion, 2011, 34(3): 67–70. (in Chinese)
[24] Brunauer S., Emmett P.H., Teller E., Adsorption of gases in multimolecular layers. Journal of American Chemical Society, 1938, 60(2): 309–319.
[25] Ustinov E.A., Do D.D., Fenelonov V.B., Pore size distribution analysis of activated carbons: Application of density functional theory using nongraphitized carbon black as a reference system. Carbon, 2006, 44(4): 653–663.
[26] Basu P., Nag P.K., An investigation into heat transfer in circulating fluidized beds. International Journal of Heat and Mass Transfer, 1987, 30(11): 2399–2409.
[27] Ebert T.A., Glicksman L.R., Lints M., Determination of particle and gas convective heat transfer component in circulating fluidized bed. Chemical Engineering Science, 1993, 48(12): 2179–2188.
[28] Liu C., Li C., Li Y., et al., Heat transfer enhancement in gas-solid flow. CIESC Journal, 2014, 7: 2485–2494. (in Chinese)
[29] Friebel J., Kopsel R.F.W., The fate of nitrogen during pyrolysis of German low rank coals—A parameter study. Fuel, 1999, 78(8): 923–932.
[30] DeDiego L.F., Londono C.A., Wang X.S., Gibbs B.M., Influence of operating parameters on NOx and N2O axial profiles in a circulating fluidized bed combustor. Fuel, 1996, 75(8): 971–978.
[31] Ke X., Cai R., Yang H., et al., Formation and ultra-low emission of NOx for circulating fluidized bed combustion. Proceedings of the CSEE, 2018, 38(2): 7. (in Chinese)
[32] Yang H., Zhang H., Yang S., et al., Effect of bed pressure drop on performance of a CFB boiler. Energy & Fuels, 2009, 23(5–6): 2886–2890.
[33] Neshumayev D., Rummel L., Konist A., et al., Power plant fuel consumption rate during load cycling. Applied Energy, 2018, 224: 124–135.
[34] Kubik M.L., Coker P.J., Barlow J.F., Increasing thermal plant flexibility in a high renewables power system. Applied Energy, 2015, 154: 102–111.
[35] Xiao Y., Song G., Yang X., et al., Influence of stoichiometry air ratio on char characteristics and nitrogen conversion in circulating fluidized bed with post-combustion. Fuel, 2021, 298: 120842.
[36] Zheng J., He H., Factors related to the residence time of fine particle concerning the burnout of Fujian anthracite during combustion in CFB boiler. International Conference on Power Engineering (ICOPE-2007), Hangzhou, China, 2007, pp. 864–867.
[37] Thomas K.M., The release of nitrogen oxides during char combustion. Fuel, 1997, 76(6): 457–473.
[38] Molina A., Eddings E.G., Pershing D.W., Sarofim A.F., Reduction of nitric oxide on the char surface at pulverized combustion conditions. Proceedings of the Combustion Institute, 2002, 29: 2275–2281.
[39] Wei L., Jiang X., Zhang C., Li R., A experimental investigation on nitrogen emission properties of micro-pulverized during pyrolysis. Proceedings of the Chinese Society of Electrical Engineering, 2006, 26(7): 62–66. (in Chinese)
[40] Zhang Y., Yu J., Lin C., et al., Influence of particle sizes of bed material and fuel on denitration reaction in circulating fluidized bed. Clean Coal Technology, 2020, 26(06): 196–202. (in Chinese)
[41] Li J., Zhang M., Yang H., et al., The theory and practice of NOx emission control for circulating fluidized bed boilers based on the re-specification of the fluidization state. Fuel Processing Technology, 2016, 150: 88–93.
[42] Yang Q., Li Z., Xu Y., Study on the special resistance characteristics of fly ash. Energy Reports, 2022, 8: 706–712.
