[1] Kane S.N., Mishra A., Dutta A.K., Preface: International conference on recent trends in physics (ICRTP 2016). Journal of Physics: Conference Series, 2016, 755: 011001. https://doi.org/10.1088/1742-6596/755/1/011001.
[2] Singh S., Anand A., Shukla A., Numerical analysis of phase change and container materials for thermal energy storage in the storage tank of solar water heating system. Journal of Thermal Science, 2024, 33(2): 408–421. https://doi.org/10.1007/s11630-023-1776-0.
[3] Wang Z., Li R., Hu J., et al., Experimental study on hybrid organic phase change materials used for solar energy storage. Journal of Thermal Science, 2020, 29(2): 486–491. https://doi.org/10.1007/s11630-020-1224-3.
[4] Kant K., Shukla A., Sharma A., Performance evaluation of fatty acids as phase change material for thermal energy storage. Journal of Energy Storage, 2016, 6: 153–162. https://doi.org/10.1016/j.est.2016.04.002.
[5] Sharma A., Shukla A., Chen C.R., Dwivedi S., Development of phase change materials for building applications. Energy and Buildings, 2013, 64: 403–407. https://doi.org/10.1016/j.enbuild.2013.05.029.
[6] Sharma A., Tyagi V.V., Chen C.R., Buddhi D., Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews, 2009, 13(2): 318–345.
https://doi.org/10.1016/j.rser.2007.10.005.
[7] Abass P.J., Muthulingam S., Selection and thermophysical assessment of phase change materials (PCMs) for space cooling applications in buildings. Numerical Heat Transfer, Part A: Applications, 2023, 84(1): 1–23.
https://doi.org/10.1080/10407782.2023.2292183.
[8] Abass P.J., Muthulingam S., Evaluation of melting front kinetics in cylindrical phase change materials module using infrared thermography and digital imaging. Materials Letters, 2024, 373: 137128.
https://doi.org/10.1016/j.matlet.2024.137128.
[9] Pasupathy A., Athanasius L., Velraj R., Seeniraj R.V., Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management. Applied Thermal Engineering, 2008, 28(5–6): 556–565.
https://doi.org/10.1016/j.applthermaleng.2007.04.016.
[10] Kant K., Pitchumani R., Shukla A., Sharma A., Analysis and design of air ventilated building integrated photovoltaic (BIPV) system incorporating phase change materials. Energy Conversion and Management, 2019, 196: 149–164.
https://doi.org/10.1016/j.enconman.2019.05.073.
[11] Uniyal A., Prajapati Y.K., Impact of fin arrangement on heat transfer and melting characteristics of phase change material. Journal of Thermal Science, 2024, 33: 435–456. https://doi.org/10.1007/s11630-024-1925-0
[12] Kong D., Zhang Y., Liu S., Enhanced natural convection for accelerating melting of phase change material in cellular structure through inserting fin. Journal of Thermal Science, 2024, 33(3): 548–563.
https://doi.org/10.1007/s11630-023-1841-8
[13] Motahar S., Alemrajabi A.A., Khodabandeh R., Enhanced thermal conductivity of n-octadecane containing carbon-based nanomaterials. Heat and Mass Transfer, 2016, 52: 1621–1631.
https://doi.org/10.1007/s00231-015-1678-0
[14] Shamshirgaran S.R., Khalaji Assadi M., Viswanatha Sharma K., Application of nanomaterials in solar thermal energy storage. Heat and Mass Transfer, 2018, 54: 1555–1577. https://doi.org/10.1007/s00231-017-2259-1
[15] Bulk A., Odukomaiya A., Simmons E., Woods J., Processing compressed expanded natural graphite for phase change material composites. Journal of Thermal Science, 2023, 32: 1213–1226.
https://doi.org/10.1007/s11630-022-1578-9
[16] Bondareva N.S., Buonomo B., Manca O., Sheremet M.A., Heat transfer inside cooling system based on phase change material with alumina nanoparticles. Applied Thermal Engineering, 2018, 144: 972–981. https://doi.org/10.1016/j.applthermaleng.2018.09.002
[17] Teng T., Yu C., Characteristics of phase-change materials containing oxide nano-additives for thermal storage. Nanoscale Research Letters, 2012, 7(1): 611.
[18] Saxena R., Rakshit D., Kaushik S.C., Experimental assessment of phase change material (PCM) embedded bricks for passive conditioning in buildings. Renewable Energy, 2020, 149: 587–599.
https://doi.org/10.1016/j.renene.2019.12.081
[19] Soares N., Gaspar A.R., Santos P., Costa J.J., Experimental study of the heat transfer through a vertical stack of rectangular cavities filled with phase change materials. Applied Energy, 2015, 142: 192–205. https://doi.org/10.1016/j.apenergy.2014.12.034
[20] Su W., Darkwa J., Kokogiannakis G., Review of solid-liquid phase change materials and their encapsulation technologies. Renewable and Sustainable Energy Reviews, 2015, 48: 373–391.
https://doi.org/10.1016/j.rser.2015.04.044
[21] Tyagi V.V., Kaushik S.C., Tyagi S.K., Akiyama T., Development of phase change materials based microencapsulated technology for buildings: A review. Renewable and Sustainable Energy Reviews, 2011, 15: 1373–1391. https://doi.org/10.1016/j.rser.2010.10.006
[22] Marani A., Nehdi M.L., Integrating phase change materials in construction materials: Critical review. Construction and Building Materials, 2019, 217: 36–49. https://doi.org/10.1016/j.conbuildmat.2019.05.064
[23] Soares N., Rosa N., Costa J.J., et al., Validation of different numerical models with benchmark experiments for modelling microencapsulated-PCM-based applications for buildings. International Journal of Thermal Sciences, 2021, 159: 106565.
https://doi.org/10.1016/j.ijthermalsci.2020.106565
[24] Errebai F.B., Chikh S., Derradji L., et al., Optimum mass percentage of microencapsulated PCM mixed with gypsum for improved latent heat storage. Journal of Energy Storage, 2021, 33: 101910.
https://doi.org/10.1016/j.est.2020.101910
[25] Song Y., Li C., Yu H., et al., Optimization of the phase-change wallboard test method: Experimental and numerical investigation. Journal of Energy Storage, 2020, 30: 101559. https://doi.org/10.1016/j.est.2020.101559
[26] Wijesuriya S., Tabares-Velasco P.C., Experimental apparatus and methodology to test and quantify thermal performance of micro and macro-encapsulated phase change materials in building envelope applications. Journal of Energy Storage, 2020, 32: 101770. https://doi.org/10.1016/j.est.2020.101770
[27] Wang W., Pan Z., Lei B., et al., Numerical simulation of charging performance of combined sensible-latent heat storage system with a macro-encapsulation method. Journal of Thermal Science, 2023, 32: 2008–2017. https://doi.org/10.1007/s11630-022-1681-y
[28] Amaral C., Pinto S.C., Silva T., et al., Development of polyurethane foam incorporating phase change material for thermal energy storage. Journal of Energy Storage, 2020, 28: 101177.
https://doi.org/10.1016/j.est.2019.101177
[29] Salgueiro T., Samagaio A., Gonçalves M., et al., Incorporation of phase change materials in an expanded clay containing mortar for indoor thermal regulation of buildings. Journal of Energy Storage, 2021, 36: 102385. https://doi.org/10.1016/j.est.2021.102385
[30] Shi J., Tan J., Liu B., et al., Thermal and mechanical properties of thermal energy storage lightweight aggregate mortar incorporated with phase change material. Journal of Energy Storage, 2020, 32: 101719. https://doi.org/10.1016/j.est.2020.101719
[31] Guardia C., Barluenga G., Palomar I., Diarce G., Thermal enhanced cement-lime mortars with phase change materials (PCM), lightweight aggregate and cellulose fibers. Construction and Building Materials, 2019, 221: 586–594. https://doi.org/10.1016/j.conbuildmat.2019.06.098
[32] Ren M., Wen X., Gao X., Liu Y., Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material. Construction and Building Materials, 2021, 273: 121714.
https://doi.org/10.1016/j.conbuildmat.2020.121714
[33] Amaral C., Silva T., Mohseni F., et al., Experimental and numerical analysis of the thermal performance of polyurethane foams panels incorporating phase change material. Energy, 2021, 216: 119213.
https://doi.org/10.1016/j.energy.2020.119213
[34] Ji W., Yuan Y., Li Y., Yu M., Wall-attached night ventilation combined with phase change material wallboard in hot summer: an experimental study on the thermal performance. Journal of Thermal Science, 2022, 31: 318–331. https://doi.org/10.1007/s11630-022-1577-x
[35] Lu S., Xu B., Tang X., Experimental study on double pipe PCM floor heating system under different operation strategies. Renewable Energy, 2020, 145: 1280–1291. https://doi.org/10.1016/j.renene.2019.06.086
[36] Li D., Wu Y., Liu C., et al., Energy investigation of glazed windows containing Nano-PCM in different seasons. Energy Conversion and Management, 2018, 172: 119–128.
https://doi.org/10.1016/j.enconman.2018.07.015
[37] Elarga H., Fantucci S., Serra V., et al., Experimental and numerical analyses on thermal performance of different typologies of PCMs integrated in the roof space. Energy and Buildings, 2017, 150: 546–557.
https://doi.org/10.1016/j.enbuild.2017.06.038
[38] Alawadhi E.M., Alqallaf H.J., Building roof with conical holes containing PCM to reduce the cooling load: Numerical study. Energy Conversion and Management, 2011, 52: 2958–2964.
https://doi.org/10.1016/j.enconman.2011.04.004
[39] Navarro L., De Gracia A., Castell A., et al., Design of a prefabricated concrete slab with PCM inside the hollows. Energy Procedia, 2014, 57: 2324–2332.
https://doi.org/10.1016/j.egypro.2014.10.240
[40] Bahrar M., Djamai Z.I., EL Mankibi M., et al., Numerical and experimental study on the use of microencapsulated phase change materials (PCMs) in textile reinforced concrete panels for energy storage. Sustainable Cities and Society, 2018, 41: 455–468.
https://doi.org/10.1016/j.scs.2018.06.014
[41] Bhamare D.K., Rathod M.K., Banerjee J., Numerical model for evaluating thermal performance of residential building roof integrated with inclined phase change material (PCM) layer. Journal of Building Engineering, 2020, 28: 101018.
https://doi.org/10.1016/j.jobe.2019.101018
[42] Zhou Y., Zheng S., Zhang G., A state-of-the-art-review on phase change materials integrated cooling systems for deterministic parametrical analysis, stochastic uncertainty-based design, single and multi-objective optimisations with machine learning applications. Energy and Buildings, 2020, 220: 110013.
https://doi.org/10.1016/j.enbuild.2020.110013
[43] Zhou Y., Zheng S., Zhang G., A review on cooling performance enhancement for phase change materials integrated systems—flexible design and smart control with machine learning applications. Building and Environment, 2020, 174: 106786.
https://doi.org/10.1016/j.buildenv.2020.106786
[44] Zhou Y., Zheng S., Liu Z., et al., Passive and active phase change materials integrated building energy systems with advanced machine-learning based climate-adaptive designs, intelligent operations, uncertainty-based analysis and optimisations: A state-of-the-art review. Renewable and Sustainable Energy Reviews, 2020, 130: 109889. https://doi.org/10.1016/j.rser.2020.109889
[45] Zhou Y., Zheng S., Zhang G., Artificial neural network based multivariable optimization of a hybrid system integrated with phase change materials, active cooling and hybrid ventilations. Energy Conversion and Management, 2019, 197: 111859.
https://doi.org/10.1016/j.enconman.2019.111859
[46] Zhou Y., Zheng S., Zhang G., Study on the energy performance enhancement of a new PCMs integrated hybrid system with the active cooling and hybrid ventilations. Energy, 2019, 179: 111–128. https://doi.org/10.1016/j.energy.2019.04.173
[47] Zhou Y., Zheng S., A co-simulated material-component-system-district framework for climate-adaption and sustainability transition. Renewable and Sustainable Energy Reviews, 2024, 192: 114184. https://doi.org/10.1016/j.rser.2023.114184
[48] Kim H.G., Kim Y., Kwac L.K., Park M., Shin H.K., Role of phase change materials containing carbonized rice husks on the roof-surface and indoor temperatures for cool roof system application. 2020, 25(14): 3280. https://doi.org/10.3390/molecules25143280
[49] Meng E., Yang J., Zhou B., et al., Preparation and thermal performance of phase change material (PCM) foamed cement used for the roof. Journal of Building Engineering, 2022, 53: 104579.
https://doi.org/10.1016/j.jobe.2022.104579
[50] Al-Yasiri Q., Szabó M., Experimental study of PCM-enhanced building envelope towards energy-saving and decarbonisation in a severe hot climate. Energy and Buildings, 2023, 279: 112680.
https://doi.org/10.1016/j.enbuild.2022.112680
[51] Zeinelabdein R., Omer S., Mohamed E., Parametric study of a sustainable cooling system integrating phase change material energy storage for buildings. Journal of Energy Storage, 2020, 32: 101972.
https://doi.org/10.1016/j.est.2020.101972
[52] Jalil J.M., Salih S.M., Experimental and numerical investigation of paraffin wax as thermal insulator in a double glazed window. Journal of Energy Storage, 2021, 35: 102173. https://doi.org/10.1016/j.est.2020.102173
[53] Cárdenas-Ramírez C., Jaramillo F., Gómez M., Systematic review of encapsulation and shape-stabilization of phase change materials. Journal of Energy Storage, 2020, 30: 101495.
https://doi.org/10.1016/j.est.2020.101495
[54] Das D., Bordoloi U., Muigai H.H., Kalita P., A novel form stable PCM based bio composite material for solar thermal energy storage applications. Journal of Energy Storage, 2020, 30: 101403.
https://doi.org/10.1016/j.est.2020.101403
[55] Mahdaoui M., Hamdaoui S., Ait Msaad A., et al., Building bricks with phase change material (PCM): Thermal performances. Construction and Building Materials, 2021, 269: 121315.
https://doi.org/10.1016/j.conbuildmat.2020.121315
[56] Bondareva N.S., Sheikholeslami M., Sheremet M.A., The influence of external temperature and convective heat exchange with an environment on heat transfer inside phase change material embedded brick. Journal of Energy Storage, 2021, 33: 102087.
https://doi.org/10.1016/j.est.2020.102087
[57] Silva T., Vicente R., Rodrigues F., Samagaio A., Cardoso C., Development of a window shutter with phase change materials: Full scale outdoor experimental approach. Energy and Buildings, 2015, 88: 110–121.
https://doi.org/10.1016/j.enbuild.2014.11.053
[58] Sathe T., Dhoble A.S., Experimental investigations of phase change material filled rectangular enclosure with inclined top and side heating mode. Journal of Energy Storage, 2020, 32: 101799.
https://doi.org/10.1016/j.est.2020.101799
[59] Rathore P.K.S., Shukla S.K., Potential of macroencapsulated PCM for thermal energy storage in buildings: A comprehensive review. Construction and Building Materials, 2019, 225: 723–744.
https://doi.org/10.1016/j.conbuildmat.2019.07.221
[60] Suehrcke H., Peterson E.L., Selby N., Effect of roof solar reflectance on the building heat gain in a hot climate. Energy and Buildings, 2008, 40: 2224–2235. https://doi.org/10.1016/j.enbuild.2008.06.015
[61] Nguyen L.M.Q., Ben Hamida M.B., Hajjar A., et al., Investigation on melting thermal resistance of PCMs applied in roof structures. Thermal Science and Engineering Progress, 2024, 51: 102649.
https://doi.org/10.1016/j.tsep.2024.102649
[62] Weldon D.G., Differential scanning calorimetry. 2014. https://doi.org/10.3139/9781569906446.007
[63] Mailhé C., Godin A., Veillère A., Duquesne M., Applicability of infrared thermography for the detection of phase transitions in metal alloys. Applied Sciences, 2021, 11: 8885. https://doi.org/10.3390/app11198885
[64] Mailhé C., Duquesne M., A fast and low-cost dynamic calorimetric method for phase diagram estimation of binary systems. Journal of Thermal Analysis and Calorimetry, 2021, 143: 587–598.
https://doi.org/10.1007/s10973-020-09287-6
[65] Vavilov V., Burleigh D., Infrared Thermography and Thermal Nondestructive Testing. 2020.
https://doi.org/10.1007/978-3-030-48002-8
[66] Rathore P.K.S., Shukla S.K., Gupta N.K., Yearly analysis of peak temperature, thermal amplitude, time lag and decrement factor of a building envelope in tropical climate. Journal of Building Engineering, 2020, 31: 101459. https://doi.org/10.1016/j.jobe.2020.101459
[67] Baskar I., Chellapandian M., Experimental and finite element analysis on the developed real-time form stable PCM based roof system for thermal energy storage applications. Energy and Buildings, 2022, 276: 112514. https://doi.org/10.1016/j.enbuild.2022.112514
[68] Barreneche C., Navarro M.E., Fernández A.I., Cabeza L.F., Improvement of the thermal inertia of building materials incorporating PCM. Evaluation in the macroscale. Applied Energy, 2013, 109: 428–432. https://doi.org/10.1016/j.apenergy.2012.12.055
[69] Saxena R., Rakshit D., Kaushik S.C., Phase change material (PCM) incorporated bricks for energy conservation in composite climate: A sustainable building solution. Solar Energy, 2019, 183: 276–284. https://doi.org/10.1016/j.solener.2019.03.035
[70] Navarro L., Solé A., Martín M., et al., Benchmarking of useful phase change materials for a building application. Energy and Buildings, 2019, 182: 45–50.
https://doi.org/10.1016/j.enbuild.2018.10.005
[71] Saxena R., Agarwal N., Rakshit D., Kaushik S.C., Suitability assessment and experimental characterization of phase change materials for energy conservation in Indian buildings. Journal of Solar Energy Engineering, 2019, pp. 142. https://doi.org/10.1115/1.4044568
[72] Simulated historical climate & weather data for Ropar - meteoblue. https://www.meteoblue.com/en/weather/historyclimate/climatemodelled/ropar_india_1257951 (accessed May 20, 2022).
[73] Abass P.J., Muthulingam S., Thermal energy storage performance of biaxial voided RCC roof slab integrated with macroencapsulated PCM for passive cooling of buildings. Journal of Energy Storage, 2024, 88: 111478. https://doi.org/10.1016/j.est.2024.111478
[74] Abass P.J., Muthulingam S., Energy-efficient concrete roofs for buildings: Integrating macroencapsulated nano-enhanced PCMs for hot climate adaptation. Case Studies in Thermal Engineering, 2025, 66: 105744. https://doi.org/10.1016/j.csite.2025.105744
[75] Abdulmunem A.R., Hamed H.M., Samin P.M., et al., Thermal management of lithium-ion batteries using palm fatty acid distillate as a sustainable bio-phase change material. Journal of Energy Storage, 2023, 73: 109187. https://doi.org/10.1016/j.est.2023.109187
[76] Joybari M.M., Haghighat F., Seddegh S., Natural convection characterization during melting of phase change materials: Development of a simplified front tracking method. Solar Energy, 2017, 158: 711–720. https://doi.org/10.1016/j.solener.2017.10.031
[77] Dhaidan N.S., Khodadadi J.M., Melting and convection of phase change materials in different shape containers: A review. Renewable and Sustainable Energy Reviews, 2015, 43: 449–477.
https://doi.org/10.1016/j.rser.2014.11.017
[78] Zayed M.E., Zhao J., Li W., et al., Recent progress in phase change materials storage containers: Geometries, design considerations and heat transfer improvement methods. Journal of Energy Storage, 2020, 30: 101341. https://doi.org/10.1016/j.est.2020.101341
[79] Thonon M., Fraisse G., Zalewski L., Pailha M., Towards a better analytical modelling of the thermodynamic behaviour of phase change materials. Journal of Energy Storage, 2020, 32: 101826.
https://doi.org/10.1016/j.est.2020.101826
[80] ASHRAE-55, Thermal environmental conditions for human occupancy. ANSI/ASHRAE Standard 55, 2017, 7: 60.
[81] Fanger P.O., Thermal Comfort: Analysis and Applications in Environmental Engineering. Danish Technical Press, 1970.
https://books.google.co.in/books?id=S0FSAAAAMAAJ
[82] Olesen B.W., Brager G.S., A better way to predict comfort. ASHRAE Journal, 2004, 46: 20–28.
[83] Kenzhekhanov S., Memon S.A., Adilkhanova I., Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate. Energy, 2020, 192: 116607. https://doi.org/10.1016/j.energy.2019.116607
[84] Maleki B., Khadang A., Maddah H., et al., Development and thermal performance of nanoencapsulated PCM/plaster wallboard for thermal energy storage in buildings. Journal of Building Engineering, 2020, 32: 101727. https://doi.org/10.1016/j.jobe.2020.101727
[85] Al-Yasiri Q., Szabó M., Energetic and thermal comfort assessment of phase change material passively incorporated building envelope in severe hot climate: An experimental study. Applied Energy, 2022, 314: 118957. https://doi.org/10.1016/j.apenergy.2022.118957
[86] Jamil H., Alam M., Sanjayan J., Wilson J., Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building. Energy and Buildings, 2016, 133: 217–229.
https://doi.org/10.1016/j.enbuild.2016.09.064
[87] Kishore R.A., Bianchi M.V.A., Booten C., et al., Optimizing PCM-integrated walls for potential energy savings in U.S. buildings. Energy and Buildings, 2020, 226: 110355.
https://doi.org/10.1016/j.enbuild.2020.110355
[88] Khdair A.I., Abu Rumman G., Basha M., Developing building enhanced with PCM to reduce energy consumption. Journal of Building Engineering, 2022, 48: 103923. https://doi.org/10.1016/j.jobe.2021.103923
[89] Saikia P., Pancholi M., Sood D., Rakshit D., Dynamic optimization of multi-retrofit building envelope for enhanced energy performance with a case study in hot Indian climate. Energy, 2020, 197: 117263.
https://doi.org/10.1016/j.energy.2020.117263
[90] Khanna S.V., Chandra A., Singh P.S., PSERC-tariff order FY 2022-23 for PSPCL. Punjab State Electricity Regulatory Commission. www.pspcl.in
[91] Hou M., Kong X., Li H., et al., Experimental study on the thermal performance of composite phase change ventilated roof. Journal of Energy Storage, 2021, 33: 102060. https://doi.org/10.1016/j.est.2020.102060
[92] Li H., Li J., Xi C., et al., Experimental and numerical study on the thermal performance of ventilated roof composed with multiple phase change material (VR-MPCM). Energy Conversion and Management, 2020, 213: 112836.
https://doi.org/10.1016/j.enconman.2020.112836.
