Nitrate salts have better thermal stability, low vapour pressure and non-toxic nature compared to synthetic heat transfer oil like Therminol VP-1®. Solar salt, a mixture of 60% NaNO3-40% KNO3 by weight, is finding increased application as a Heat Transfer Fluid (HTF) and Thermal Energy Storage (TES) material in Concentrated Solar Power (CSP) plant. In this research work, two novel salt mixtures are prepared and tested for their melting point, short and long duration thermal stability. The formulation 1 is a ternary salt comprising of 44% KNO3-32% Ca(NO3)2-24% NaNO3, referred to as Base Salt. Formulation 2 is a quinary mixture of 90% Base salt- 5% NaCl-5% KCl, referred to as Base-Chloride. Solar salt, a third formulation, is also tested and compared alongside the novel mixtures. The experiments conclude that the melting point of solar salt is 223°C, Base salt is 135.8°C and Base-Chloride is 142.2°C. When heated at 5°C/min, the decomposition (3% mass loss) of solar salt is observed at 631°C, Base salt at 585°C and Base-Chloride at 589°C. Considering long duration stability, all the three mixtures remain stable till 400°C, when heated at constant temperature for 24 hours. The novel mixtures have significantly lower melting points, thus providing wider operating temperature range compared to solar salt for both heat transfer and energy storage application. Moreover, it is observed that addition of chloride salt as an impurity to a nitrate mixture does not change its operating range significantly.
PAWAR Siddhesh
,
TAMAINOT-TELTO Zacharie
,
MUHMOOD Luckman
. Thermal Analysis of Novel Nitrate-Chloride Salt Mixtures for Concentrated Solar Power Applications[J]. Journal of Thermal Science, 2025
, 34(6)
: 2204
-2209
.
DOI: 10.1007/s11630-025-2166-6
[1] Renewables 2023 Global Status Report.
www.ren21.net/gsr-2024/modules/energy_supply/01_global_trends, 2024 (accessed on 5 January 2024).
[2] Renewable 2022 Global Status Report.
www.ren21.net/wp-content/uploads/2019/05/GSR2022_Full_Report.pdf, 2023 (accessed on 29 December 2023).
[3] Solar Heat for Industry.
www.solar-payback.com/wp-content/uploads/2017/07/Solar-Heat-for-Industry-Solar-Payback-April-2017.pdf, 2017 (accessed on 29 December 2023).
[4] Kumar L., Hasanuzzaman M., Rahim N.A., Global advancement of solar thermal energy technologies for industrial process heat and its future prospects: A review. Energy Conversion and Management, 2019, 195: 885–908.
[5] Bradshaw R.W., Siegel N.P., Molten nitrate salt development for thermal energy storage in parabolic trough solar power systems. Energy Sustainability, 2017, 163: 631–637.
[6] Arias I., Cardemil J., Zarza E., et al., Latest developments, assessments and research trends for next generation of concentrated solar power plants using liquid heat transfer fluids. Renewable and Sustainable Energy Reviews, 2022, 168: 112844.
[7] Silva-Pérez M.A., Solar power towers using supercritical CO2 and supercritical steam cycles and decoupled combined cycles. Advances in Concentrating Solar Thermal Research and Technology, 2017, pp. 383–402. Woodhead Publishing.
[8] Pan C.A., Guédez R., Dinter F., et al., (2019, July). A techno-economic comparative analysis of thermal oil and molten salt parabolic trough power plants with molten
salt solar towers. In AIP Conference Proceedings 2019, 2126: 120014.
[9] González-Roubaud E., Pérez-Osorio D., Prieto C., Review of commercial thermal energy storage in concentrated solar power plants: Steam vs. molten salts. Renewable and Sustainable Energy Reviews, 2017, 80: 133–148.
[10] Dunlop T.O., Jarvis D.J., Voice W.E., et al., Stabilization of molten salt materials using metal chlorides for solar thermal storage. Scientific Reports, 2018, 8(1): 1–7.
[11] Shrotri V., Muhmood L., Experimental and modeling studies on density of Ca (NO3)2-NaNO3-KNO3 ternary salts with focus on calcium nitrate density prediction. International Journal of Thermophysics, 2020, 41: 1–17.
[12] Pawar S.C., Shrotri V., Muhmood L., Stabilizing molten salts through additives for high temperature CSP applications. Advances in Clean Energy Technologies: Proceedings of ICET 2020, 2021, pp. 13–21.
[13] Raade J.W., Padowitz D., Development of molten salt heat transfer fluid with low melting point and high thermal stability. Journal of Solar Energy Engineering, 2011, 133(3): 031013.
[14] Gomez J.C., Calvet N., Starace A.K., et al., Ca (NO3)2-NaNO3-KNO3 molten salt mixtures for direct thermal energy storage systems in parabolic trough plants. Journal of Solar Energy Engineering, 2013, 135(2): 021016.
[15] Costa S.C., Mahkamov K., Kenisarin M., et al., Solar salt latent heat thermal storage for a small solar organic Rankine cycle plant. Journal of Energy Resources Technology, 2020, 142(3): 031203.
[16] Fei Z., Zhang Y., Ge M., et al., Probing thermal decomposition mechanism of molten nitrite/nitrates salt by time of flight mass spectrometry. Solar Energy, 2019, 183: 823–828.
[17] Wu Y., Li J., Wang M., et al., Solar salt dopped by MWCNTs as a promising high thermal conductivity material for CSP. RSC Advances, 2018, 8(34): 19251–19260.
[18] Gimenez P., Fereres S., Effect of heating rates and composition on the thermal decomposition of nitrate based molten salts. Energy Procedia, 2015, 69: 654–662.
[19] Bauer T., Pfleger N., Breidenbach N., et al., Material aspects of solar salt for sensible heat storage. Applied Energy, 2013, 111: 1114–1119.
