[1] Edenhofer O., Pichs-Madruga R., Sokona Y., et al., Renewable energy sources and climate change mitigation: Special report of the intergovernmental panel on climate change, Cambridge University Press, 2011.
[2] Lefebvre A.H., Ballal D.R., Gas turbine combustion: alternative fuels and emissions, CRC press, 2010.
[3] Cabrera E., de Sousa J.M.M., Use of sustainable fuels in aviation—A Review. Energies, 2022, 15(7): 2440.
[4] Rahmes T., Kinder J., Crenfeldt G., et al., Sustainable bio-derived synthetic paraffinic kerosene (Bio-SPK) jet fuel flights and engine tests program results. Processing of the 9th AIAA aviation technology, integration, and operations conference (ATIO) and aircraft noise and emissions reduction symposium (ANERS), AAIA: 2009-7002.
[5] Pandey R.K., Rehman A., Sarviya R., Impact of alternative fuel properties on fuel spray behavior and atomization. Renewable and Sustainable Energy Reviews, 2012, 16(3): 1762‒1778.
[6] Sallevelt J., Gudde J., Pozarlik A.K., et al., The impact of spray quality on the combustion of a viscous biofuel in a micro gas turbine. Applied Energy, 2014, 132: 575‒585.
[7] Sivakumar D., Vankeswaram S., Sakthikumar R., et al., An experimental study on jatropha-derived alternative aviation fuel sprays from simplex swirl atomizer. Fuel, 2016, 179: 36‒44.
[8] Shin D., Satija A., Lucht R.P., Spray characteristics of standard and alternative aviation fuels at high ambient pressure conditions. Experimental Thermal and Fluid Science, 2022, 130: 110511.
[9] Hui X., Kumar K., Sung C.-J., et al., Experimental studies on the combustion characteristics of alternative jet fuels. Fuel, 2012, 98: 176‒182.
[10] Valco D., Gentz G., Allen C., et al., Autoignition behavior of synthetic alternative jet fuels: An examination of chemical composition effects on ignition delays at low to intermediate temperatures. Proceedings of the Combustion Institute, 2015, 35(3): 2983‒2991.
[11] Han H.S., Sohn C.H., Han J., et al., Measurement of combustion properties and ignition delay time of high performance alternative aviation fuels. Fuel, 2021, 303: 121243.
[12] Rye L., Wilson C., The influence of alternative fuel composition on gas turbine ignition performance. Fuel, 2012, 96: 277‒283.
[13] Liu A., Yang Y., Chen L., et al., Experimental study of biogas combustion and emissions for a micro gas turbine. Fuel, 2020, 267: 117312.
[14] Hashimoto N., Nishida H., Ozawa Y., Fundamental combustion characteristics of Jatropha oil as alternative fuel for gas turbines. Fuel, 2014, 126: 194‒201.
[15] Elser M., Brem B.T., Durdina L., et al., Chemical composition and radiative properties of nascent particulate matter emitted by an aircraft turbofan burning conventional and alternative fuels. Atmospheric Chemistry and Physics, 2019, 19(10): 6809‒6820.
[16] Ballal D., Lefebvre A., Combustion performance of gas turbine combustors burning alternative fuels. Journal of Energy, 1979, 3(1): 50‒54.
[17] Zheng L., Cronly J., Ubogu E., et al., Experimental investigation on alternative fuel combustion performance using a gas turbine combustor. Applied Energy, 2019, 238: 1530‒1542.
[18] Lobo P., Rye L., Williams P.I., et al., Impact of alternative fuels on emissions characteristics of a gas turbine engine–part 1: gaseous and particulate matter emissions. Environmental Science & Technology, 2012, 46(19): 10805‒10811.
[19] Sundararaj R.H., Kumar R.D., Raut A.K., et al., Combustion and emission characteristics from biojet fuel blends in a gas turbine combustor. Energy, 2019, 182: 689‒705.
[20] Cui Y., Liu H., Geng C., et al., Optical diagnostics on the effects of fuel properties and coolant temperatures on combustion characteristic and flame development progress from HCCI to CDC via PPC. Fuel, 2020, 269: 117441.
[21] Yi W., Liu H., Feng L., et al., Multiple optical diagnostics on effects of fuel properties on spray flames under oxygen-enriched conditions. Fuel, 2021, 291: 120129.
[22] Jones W., Tober A., Measurements of gas composition and temperature inside a can type model combustor. in: aerothermodynamics in combustors. International Union of Theoretical and Applied Mechanics. Springer, Berlin, Heidelberg. 1991, pp. 327‒338.
DOI: 10.1007/978-3-642-84755-4_23
[23] Mazlan N.M., Savill M., Kipouros T., Effects of biofuels properties on aircraft engine performance. Aircraft Engineering and Aerospace Technology: An International Journal, 2015, 87(5): 437‒442.
[24] Mazlan N.M., Savill M., Kipouros T., Evaluating NOx and CO emissions of bio-SPK fuel using a simplified engine combustion model: a preliminary study towards sustainable environment. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2017, 231(5): 859‒865.
[25] Kayakol N., Selçuk N., Campbell I., et al., Performance of discrete ordinates method in a gas turbine combustor simulator. Experimental Thermal and Fluid Science, 2000, 21: 134‒141.
[26] Sharma N., Datta A., Som S., Influences of spray and operating parameters on penetration of vaporizing fuel droplets in a gas turbine combustor. Applied Thermal Engineering, 2001, 21(17): 1755‒1768.
[27] Sharma N., Som S., Influence of fuel volatility and spray parameters on combustion characteristics and NOx emission in a gas turbine combustor. Applied Thermal Engineering, 2004, 24: 885‒903.
[28] Bazdidi-Tehrani F., Zeinivand H., Presumed PDF modeling of reactive two-phase flow in a three dimensional jet-stabilized model combustor. Energy Conversion and Management, 2010, 51(1): 225‒234.
[29] Azami M.H., Savill M., Modelling of spray evaporation and penetration for alternative fuels. Fuel, 2016, 180: 514‒520.
[30] Bazdidi-Tehrani F., Mirzaei S., Abedinejad M.S., Influence of chemical mechanisms on spray combustion characteristics of turbulent flow in a wall jet can combustor. Energy & Fuels, 2017, 31(7): 7523‒7539.
[31] Yang T., Wang Q., Yi R., et al., Modeling spray combustion of jet-A in a constant-volume combustion chamber. Processing of 2018 Joint Propulsion Conference, Article ID: 4565.
[32] Shreekala N., Sridhara S., Numerical Investigation of influence of flow rates on combustion characteristics using multiphase flamelet combustion. Journal of Applied Fluid Mechanics, 2019, 12(4): 1013‒1021.
[33] Bazdidi-Tehrani F., Teymoori A., Ghiyasi M., Sensitivity analysis of pollutants and pattern factor in a gas turbine model combustor due to changes in stabilizing jets characteristics. Journal of Thermal Science, 2022, 31(5): 1622‒1641.
[34] Bazdidi-Tehrani F., Teymoori A., Optimization of a gas turbine model combustor due to variations in geometrical characteristics of stabilizing air jets. Applied Thermal Engineering, 2022, 217: 119206.
[35] Eaton A., Smoot L., Hill S., et al., Components, formulations, solutions, evaluation, and application of comprehensive combustion models. Progress in energy and combustion science, 1999, 25(4): 387‒436.
[36] Kohnen G., Rüger M., Sommerfeld M., Convergence behaviour for numerical calculations by the Euler/Lagrange method for strongly coupled phases. ASME-Fed, 1994, 185: 191‒202.
[37] Sirignano W.A., Fluid dynamics and transport of droplets and sprays, Cambridge University press, 2010.
[38] Sazhin S.S., Advanced models of fuel droplet heating and evaporation. Progress in energy and combustion science, 2006, 32(2): 162‒214.
[39] Berlemont A., Grancher M., Gouesbet G., Heat and mass transfer coupling between vaporizing droplets and turbulence using a Lagrangian approach. International Journal of Heat and Mass Transfer, 1995, 38(16): 3023‒3034.
[40] Zeinivand H., Bazdidi-Tehrani F., Influence of stabilizer jets on combustion characteristics and NOx emission in a jet-stabilized combustor. Applied Energy, 2012, 92: 348‒360.
[41] Liu X., Zheng H., Influence of deflection hole angle on effusion cooling in a real combustion chamber condition. Thermal Science, 2015, 19(2): 645‒656.
[42] Hanson R.K., Salimian S., Survey of rate constants in the N/H/O system. Combustion Chemistry, 1984, pp. 361‒421.
[43] ANSYS Fluent 2021 R1 user’s guide and theory manual. Ansys Fluent Inc, 2021.
[44] Pitsch H., Peters N., A consistent flamelet formulation for non-premixed combustion considering differential diffusion effects. Combustion and Flame, 1998, 114: 26‒40.
[45] Mathur S., Murthy J., Coupled ordinates method for multigrid acceleration of radiation calculations. Journal of Thermophysics and Heat Transfer, 1999, 13(4): 467‒473.
[46] Fiveland W., Three-dimensional radiative heat-transfer solutions by the discrete-ordinates method. Journal of Thermophysics and Heat Transfer, 1988, 2(4): 309‒316.
[47] Ranzi E., Frassoldati A., Stagni A., et al., Reduced kinetic schemes of complex reaction systems: fossil and biomass -derived transportation fuels. International Journal of Chemical Kinetics, 2014, 46(9): 512‒542.
[48] Dryer F., Sawyer R., Physical and chemical aspects of combustion: a tribute to Irvin Glassman, CRC Press, 1997.
[49] Talley D., Universal definitions of mixture fractions and progress variables for arbitrary states of premixing. Combustion and Flame, 1992, 88(1): 83‒101.
[50] Poli A.A., Cirillo M.C., On the use of the normalized mean square error in evaluating dispersion model performance. Atmospheric Environment. Part A. General Topics, 1993, 27(15): 2427‒2434.
