[1]
Coomar N., Kadoli R., Comparative analysis of steady state heat transfer in a TBC and functionally graded air cooled gas turbine blade. Sadhana, 2010, 35(1): 1–17.
[2]
Sadowski T., Pietras D., Heat transfer process in jet turbine blade with functionally graded thermal barrier coating. Solid State Phenomena, 2016, 254: 170–175.
[3]
Babazadeh M.A., Babaelahi M., Saadatfar M., New optimum configuration for the FGM rotating disc in gas turbines using combined thermal-mechanical analysis: An analytical approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2024, 238(7): 3038–3051.
[4]
Wang H., Zhang B., Liu M., Rao Z., Analytical solution of heat transfer performance of pin-array stack regenerator in stirling cycle. International Journal of Thermal Sciences, 2021, 167: 107015.
[5]
Fu G., Wang X., Wang B., Su J., Wang K., Sun B., Dynamic behavior of axially functionally graded pipe conveying gas-liquid two-phase flow. Applied Ocean Research, 2024, 142: 103827.
[6]
Elleuch S., Jrad H., Wali M., Dammak F., Finite element analysis of the effect of porosity on biomechanical behaviour of functionally graded dental implant. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2023. DOI: 10.1177/09544089231197857
[7]
Watari F., Yokoyama A., Omori M., Hirai T., Kondo H., Uo M., Kawasaki T., Biocompatibility of materials and development to functionally graded implant for bio-medical application. Composites Science and Technology, 2004, 64(6): 893–908.
[8]
Pasupuleti K.T., Dsouza S., Thejaraju R., Venkataraman S., Ramaswamy P., Murty S.N., Performance and steady state heat transfer analysis of functionally graded thermal barrier coatings systems. Materials Today: Proceedings, 2018, 5(14): 27936–27945.
[9]
Ge W., Zhao C., Wang B., Thermal radiation and conduction in functionally graded thermal barrier coatings. Part II: Experimental thermal conductivities and heat transfer modeling. International Journal of Heat and Mass Transfer, 2019, 134: 166–174.
[10]
Heydari P., A review on functionally graded-thermal barrier coatings (FG-TBC) fabrication methods in gas turbines. American Journal of Mechanical and Materials Engineering, 2022, 6(2): 18–26.
[11]
Miyamoto Y., Kaysser W., Rabin B., Kawasaki A., Ford R.G., Functionally graded materials: design, processing and applications. Springer Science & Business Media, 2013.
[12]
Suresh S., Mortensen A., Fundamentals of Functionally Graded Materials. IOM Commun, Ltd, Cambridge, 1998.
[13]
Mahamood R.M., Akinlabi E.T., Mahamood R.M., Akinlabi E.T., Functionally graded materials. Springer, 2017.
[14]
Zhang J., Chen S., Zheng W., Dynamic buckling analysis of functionally graded material cylindrical shells under thermal shock. Continuum Mechanics and Thermodynamics, 2020, 32: 1095–1108.
[15]
Gray L., Kaplan T., Richardson J., Paulino G., Green’s functions and boundary integral analysis for exponentially graded materials: heat conduction. Journal of Applied Mechanics, 2003, 70(4): 543–549.
[16]
Pandey S., Pradyumna S., Transient stress analysis of sandwich plate and shell panels with functionally graded material core under thermal shock. Journal of Thermal Stresses, 2018, 41(5): 543–567.
[17]
Liu Q., Ming P., A high-order control volume finite element method for 3-D transient heat conduction analysis of multilayer functionally graded materials. Numerical Heat Transfer, Part B: Fundamentals, 2018, 73(6): 363–385.
[18]
Fu Z.J., Chen W., Qin Q.H., Three boundary meshless methods for heat conduction analysis in nonlinear FGMs with Kirchhoff and Laplace transformation. Advances in Applied Mathematics and Mechanics, 2012, 4(5): 519–542.
[19]
Sadowski T., Boniecki M., Librant Z., Nakonieczny K., Theoretical prediction and experimental verification of temperature distribution in FGM cylindrical plates subjected to thermal shock. International Journal of Heat and Mass Transfer, 2007, 50(21–22): 4461–4467.
[20]
Li L., Zhang X., Cui W., Liou F., Deng W., Li W., Temperature and residual stress distribution of FGM parts by DED process: modeling and experimental validation. The International Journal of Advanced Manufacturing Technology, 2020, 109: 451–462.
[21]
Zhang H., Kan W., Hu X., Green’s function approach to the nonlinear transient heat transfer analysis of functionally graded materials. International Journal of Thermal Sciences, 2013, 71: 292–301.
[22]
Nguyen T.H., Nguyen N.T., Ly D.A., Tran T.N., Procedure of forming power law Functionally Graded Material (FGM) plate using ANSYS. Engineering Proceedings, 2023, 55(1): 70.
[23]
Al-Lehaibi E.A., Power law modeling of functionally graded Adomian’s decomposition method for thermoelastic materials in heat transfer and thermal stress analysis. Waves in Random and Complex Media, 2021, pp: 1–15.
[24]
Keles I., Conker C., Transient hyperbolic heat conduction in thick-walled FGM cylinders and spheres with exponentially-varying properties. European Journal of Mechanics-A/Solids, 2011, 30(3): 449–455.
[25]
Fu Z.J., Xi Q., Chen W., Cheng A.H.D., A boundary-type meshless solver for transient heat conduction analysis of slender functionally graded materials with exponential variations. Computers & Mathematics with Applications, 2018, 76(4): 760–773.
[26]
Celebi K., Yarimpabuç D., Keles I., A novel approach to thermal and mechanical stresses in a FGM cylinder with exponentially-varying properties. Journal of Theoretical and Applied Mechanics, 2017, 55(1): 343–351.
[27]
Ruzuqi R., Analysis two dimension heat conduction in functionally graded materials using finite element methods. International Journal of Science and Society, 2020, 2(2): 91–101.
[28]
Khosravifard A., Hematiyan M., Marin L., Nonlinear transient heat conduction analysis of functionally graded materials in the presence of heat sources using an improved meshless radial point interpolation method. Applied Mathematical Modelling, 2011, 35(9): 4157–4174.
[29]
Luo Z., Zhang J., Zhang Y., Liu J., Lu A., Effect of Y/Al ratio on crystallization, microstructures and mechanical properties of Y-Si-Al-ONF glass-ceramics. Ceramics International, 2018, 44(7): 8242–8248.
[30]
Rojacz H., Birkelbach F., Widder L., Varga M., Scale adhesion, scratch and fracture behaviour of different oxides formed on iron based alloys at 700°C. Wear, 2017, 380: 126–136.
[31]
Li X., Xing L., Hu Y., Xiong Z., Wang R., Xu X., et al., An RGD-modified hollow silica@Au core/shell nanoplatform for tumor combination therapy. Acta Biomaterialia, 2017, 62: 273–283.
[32]
Sobie C., Capolungo L., McDowell D.L., Martinez E., Scale transition using dislocation dynamics and the nudged elastic band method. Journal of the Mechanics and Physics of Solids, 2017, 105: 161–178.
[33]
Haritha P., Martín I., Viswanath C.D., et al., Structure, morphology and optical characterization of Dy3+-doped BaYF5 nanocrystals for warm white light emitting devices. Optical Materials, 2017, 70: 16–24.
[34]
Zhuang F., Lin Z., Zhu S., Observation of the effective linear polarization induced by the asymmetrical Raman gain of YVO4 crystal. Optical Materials, 2016, 60: 290–293.
[35]
Amiri Delouei A., Emamian A., Sajjadi H., et al., A comprehensive review on Multi-dimensional heat conduction of multi-layer and composite Structures. Analytical Solutions. Journal of Thermal Science, 2021, 30(6): 1875–1907.
[36]
Arpaci V.S., Arpaci V.S., Conduction heat transfer, Addison-Wesley Reading, MA, 1966.
[37]
Kays W.M., Crawford M.E., Weigand B., Convective heat and mass transfer, McGraw-Hill New York, 1980.
[38]
Kakaç S., Yener Y., Naveira-Cotta C.P., Heat conduction, CRC press, 2018.
[39]
Howell J.R., Mengüç M.P., Daun K., Siegel R., Thermal radiation heat transfer, CRC press, 2020.
[40]
Han J.C., Wright L.M., Analytical heat transfer, Taylor & Francis, 2022.
[41]
Jin Z.H., An asymptotic solution of temperature field in a strip a functionally graded material. International Communications in Heat and Mass Transfer, 2002, 29(7): 887–895.
[42]
Jędrysiak J., Stationary heat conduction in laminates with non-uniform distribution of laminas. Civil and Environmental Engineering Reports, 2010, pp: 101–111.
[43]
Jędrysiak J., Radzikowska A., Some problems of heat conduction for transversally graded laminates with non-uniform distribution of laminas. Archives of Civil and Mechanical Engineering, 2011, 11(1): 75–87.
[44]
Jin Z., Heat conduction in a functionally graded plate subjected to finite cooling/heating rates: An asymptotic solution. Materials, 2011, 4(12): 2108–2118.
[45]
Zhou Y.T., Lee K.Y., Transient heat conduction in a functionally graded strip in contact with well stirred fluid with an outside heat source. International Journal of Heat and Mass Transfer, 2011, 54: 5438–5443.
[46]
Wang X., Wang Z., Zeng T., Cheng S., Yang F., Exact analytical solution for steady-state heat transfer in functionally graded sandwich slabs with convective-radiative boundary conditions. Composite structures, 2018, 192: 379–386.
[47]
Cardano G., Witmer T.R., Ars magna, or, the rules of algebra, 1993.
[48]
Sobamowo M., Oguntala G., Yinusa A., Nonlinear transient thermal modeling and analysis of a convective-radiative fin with functionally graded material in a magnetic environment. Modelling and Simulation in Engineering, 2019. DOI: 10.1155/2019/7878564
[49]
Lee S., Lim T.K., Kim J.H., Kim J.H, Temperature-dependent shear correction factor with heat transfer based on micromechanical properties for FGM plates. Thin-Walled Structures, 2022, 181: 110095.
[50]
Karakoti A., Pandey S., Kar V.R., Nonlinear transient analysis of porous P-FGM and S-FGM sandwich plates and shell panels under blast loading and thermal environment. Thin-Walled Structures, 2022, 173: 108985.
[51]
Molaei Najafabadi M., Taati E., Basirat Tabrizi H., Optimization of functionally graded materials in the slab symmetrically surface heated using transient analytical solution. Journal of Thermal Stresses, 2014, 37(2): 137–159.
[52]
Berger J., Martin P., Mantič V., Gray L., Fundamental solutions for steady-state heat transfer in an exponentially graded anisotropic material. Zeitschrift für angewandte Mathematik und Physik ZAMP, 2005, 56: 293–303.
[53]
Farlow S.J., Partial differential equations for scientists and engineers: Courier Corporation, 1993.
[54]
Debnath L., Debnath L., Nonlinear partial differential equations for scientists and engineers: Springer, 2005.
[55]
Ma C.C., Chen Y.T., Theoretical analysis of heat conduction problems of nonhomogeneous functionally graded materials for a layer sandwiched between two half-planes. Acta Mechanica, 2011, 221: 223–237.
[56]
Tian J., Jiang K., Heat conduction investigation of functionally graded material plates under the exponential heat source load. Numerical Heat Transfer, Part A: Applications, 2017, 72(2): 141–152.
[57]
Tian J., Jiang K., Heat conduction investigation of the functionally graded materials plates with variable gradient parameters under exponential heat source load. International Journal of Heat and Mass Transfer, 2018, 122: 22–30.
[58]
Tarn J.Q., Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads. International Journal of Solids and Structures, 2001, 38(46–47): 8189–8206.
[59]
Jabbari M., Sohrabpour S., Eslami M., Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads. International Journal of Pressure Vessels and Piping, 2002, 79(7): 493–497.
[60]
Ootao Y., Tanigawa Y., Transient thermoelastic analysis for a functionally graded hollow cylinder. Journal of Thermal Stresses, 2006, 29(11): 1031–1046.
[61]
Hosseini S.M., Akhlaghi M., Shakeri M., Transient heat conduction in functionally graded thick hollow cylinders by analytical method. Heat and Mass Transfer, 2007, 43: 669–675.
[62]
Tarn J.Q., Wang Y.M., End effects of heat conduction in circular cylinders of functionally graded materials and laminated composites. International Journal of Heat and Mass Transfer, 2004, 47(26): 5741–5747.
[63]
Jabbari M., Mohazzab A., Bahtui A., One-dimensional moving heat source in a hollow FGM cylinder, 2009.
[64]
Hosseini S.M., Abolbashari M.H., A unified formulation for the analysis of temperature field in a thick hollow cylinder made of functionally graded materials with various grading patterns. Heat Transfer Engineering, 2012, 33(3): 261–271.
[65]
Wang H., An effective approach for transient thermal analysis in a functionally graded hollow cylinder. International Journal of Heat and Mass Transfer, 2013, 67: 499–505.
[66]
Lee S.Y., Huang C.C., Analytic solutions for heat conduction in functionally graded circular hollow cylinders with time-dependent boundary conditions. Mathematical Problems in Engineering, 2013.
[67]
Moosaie A., A nonlinear analysis of thermal stresses in an incompressible functionally graded hollow cylinder with temperature-dependent material properties. European Journal of Mechanics-A/Solids, 2016, 55: 212–220.
[68]
Hosseini M., Dini A., Eftekhari M., Strain gradient effects on the thermoelastic analysis of a functionally graded micro-rotating cylinder using generalized differential quadrature method. Acta Mechanica, 2017, 228: 1563–1580.
[69]
Yildirim V., Exact thermal analysis of functionally graded cylindrical and spherical vessels. International Journal of Engineering and Applied Sciences, 2017, 9(2): 112–126.
[70]
Akbari M.R., Ghanbari J., Analytical exact solution for functionally graded rotating disks under non-symmetric thermal and mechanical loads. Materials Research Express, 2019, 6(5): 056545.
[71]
Daikh A.A., Houari M.S.A., Tounsi A., Buckling analysis of porous FGM sandwich nanoplates due to heat conduction via nonlocal strain gradient theory. Engineering Research Express, 2019, 1(1): 015022.
[72]
Vaziri S.A., Ghannad M., Bég O.A., Exact thermoelastic analysis of a thick cylindrical functionally graded material shell under unsteady heating using first order shear deformation theory. Heat Transfer—Asian Research, 2019, 48(5): 1737–1760.
[73]
Yildirim V., Thermomechanical characteristics of a functionally graded mounted uniform disc with/without rigid casing. Journal of Aerospace Technology and Management, 2019. DOI: 10.5028/jatm.v11.1008
[74]
Yildirim V., Exact axisymmetric thermal analysis of functionally graded disks with continuously hyperbolically varying thickness. International Journal of Engineering Technologies IJET, 2020, 6(1): 1–12.
[75]
Benchallal R., Benslimane A., Bidgoli O., Hammiche D., Analytical solution for rotating cylindrical FGM vessel subjected to thermomechanical loadings. Materials Today: Proceedings, 2022, 53: 24–30.
[76]
Rahimi G., Nejad M.Z., Exact solutions for thermal stresses in a rotating thick-walled cylinder of functionally graded materials. Journal of Applied Sciences, 2008, 8(18): 3267–3272.
[77]
Obata Y., Noda N., Steady thermal stresses in a hollow circular cylinder and a hollow sphere of a functionally gradient material. Journal of Thermal Stresses, 1994, 17(3): 471–487.
[78]
Hosseini S.M., Akhlaghi M., Analytical solution in transient thermo‐elasticity of functionally graded thick hollow cylinders (Pseudo‐dynamic analysis). Mathematical Methods in the Applied Sciences, 2009, 32(15): 2019–2034.
[79]
Jabbari M., Sohrabpour S., Eslami M., General solution for mechanical and thermal stresses in a functionally graded hollow cylinder due to nonaxisymmetric steady-state loads. Journal of Applied Mechanics, 2003, 70(1): 111–118.
[80]
Tarn J.Q., Wang Y.M., Heat conduction in a cylindrically anisotropic tube of a functionally graded material. Journal of Mechanics, 2003, 19(3): 365–372.
[81]
Shao Z., Ang K., Reddy J., Wang T., Nonaxisymmetric thermomechanical analysis of functionally graded hollow cylinders. Journal of Thermal Stresses, 2008, 31(6): 515–536.
[82]
Daneshjou K., Bakhtiari M., Alibakhshi R., Fakoor M., Transient thermal analysis in 2D orthotropic FG hollow cylinder with heat source. International Journal of Heat and Mass Transfer, 2015, 89: 977–984.
[83]
Singh S., Jain P.K., Analytical solution to transient heat conduction in polar coordinates with multiple layers in radial direction. International Journal of Thermal Sciences, 2008, 47(3): 261–273.
[84]
Dini A., Abolbashari M.H., Hygro-thermo-electro-elastic response of a functionally graded piezoelectric cylinder resting on an elastic foundation subjected to non-axisymmetric loads. International Journal of Pressure Vessels and Piping, 2016, 147: 21–40.
[85]
Loghman A., Nasr M., Arefi M., Nonsymmetric thermomechanical analysis of a functionally graded cylinder subjected to mechanical, thermal, and magnetic loads. Journal of Thermal Stresses, 2017, 40(6): 765– 782.
[86]
Delouei A.A., Emamian A., Karimnejad S., Sajjadi H., Tarokh A., On 2D asymmetric heat conduction in functionally graded cylindrical segments: A general exact solution. International Journal of Heat and Mass Transfer, 2019, 143: 118515.
[87]
Habibi N., Samawati S., Ahmadi O., Transient thermal stresses analysis in a FPGM cylinder. Mechanics of Advanced Composite Structures, 2019, 6(2): 81–94.
[88]
Dehbani H., Jabbari M., Khorshidvand A.R., Javadi M., Analytical solution of micropolar functionally graded materials (FGM) hollow cylinder under thermal asymmetric load (r, θ). ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 2022, 102(2): e202000156.
[89]
Delouei A.A., Emamian A., Karimnejad S., Sajjadi H., Jing D., Asymmetric conduction in an infinite functionally graded cylinder: Two-dimensional exact analytical solution under general boundary conditions. Journal of Heat Transfer, 2020, 142(4): 044505.
[90]
Amiri Delouei A., Emamian A., Karimnejad S., Sajjadi H., Jing D., Two-dimensional temperature distribution in FGM sectors with the power-law variation in radial and circumferential directions. Journal of Thermal Analysis and Calorimetry, 2021, 144: 611–621.
[91]
He F., Amiri Delouei A., Ellahi R., Alamri S.Z., Emamian A., Ghorbani S., Unsteady temperature distribution in a cylinder made of functionally graded materials under circumferentially-varying convective heat transfer boundary conditions. Zeitschrift für Naturforschung A, 2023.
[92]
Jabbari M., Bahtui A., Eslami M., Axisymmetric mechanical and thermal stresses in thick long FGM cylinders. Journal of Thermal Stresses, 2006, 29(7): 643–663.
[93]
Delouei A.A., Emamian A., Karimnejad S., Sajjadi H., A closed-form solution for axisymmetric conduction in a finite functionally graded cylinder. International Communications in Heat and Mass Transfer, 2019, 108: 104280.
[94]
Delouei A.A., Emamian A., Ghorbani S., He F., A general unsteady Fourier solution for orthotropic heat transfer in 2D functionally graded cylinders. Mathematical Methods in the Applied Sciences, 2024, 47(6): 3942–3959.
[95]
Yaghoobi M.P., Ghannad M., An analytical solution for heat conduction of FGM cylinders with varying thickness subjected to non-uniform heat flux using a first-order temperature theory and perturbation technique. International Communications in Heat and Mass Transfer, 2020, 116: 104684.
[96]
Emamian A., Amiri Delouei A., Karimnejad S., Jing D., Analytical solution for temperature distribution in functionally graded cylindrical shells under convective cooling. Mathematical Methods in the Applied Sciences, 2023, 46(10): 11442–11461.
[97]
Eslami M., Babaei M., Poultangari R., Thermal and mechanical stresses in a functionally graded thick sphere. International Journal of Pressure Vessels and Piping, 2005, 82(7): 522–527.
[98]
Jabbari M., Mousavi S., Kiani M., Solution for equation of two-dimensional transient heat conduction in functionally graded material hollow sphere with piezoelectric internal and external layers. Journal of Pressure Vessel Technology, 2017, 139(1): 011201.
[99]
Delouei A.A., Emamian A., Karimnejad S., Sajjadi H., Jing D., Two-dimensional analytical solution for temperature distribution in FG hollow spheres: General thermal boundary conditions. International Communications in Heat and Mass Transfer, 2020, 113: 104531.
[100]
Delouei A.A., Emamian A., Ghorbani S., He F., Spherical partial differential equation with non-constant coefficients for modeling of nonlinear unsteady heat conduction in functionally graded materials. ZAMM - Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 2024, pp. e202300725.
[101]
Bayat Y., Ghannad M., Torabi H., Analytical and numerical analysis for the FGM thick sphere under combined pressure and temperature loading. Archive of Applied Mechanics, 2012, 82: 229–242.
[102]
Norouzi M., Rezaei Niya S., Kayhani M., Shariati M., Karimi Demneh M., Naghavi M., Exact solution of unsteady conductive heat transfer in cylindrical composite laminates. Journal of Heat Transfer, 2012, 134(10): 101301.
[103]
Emamian A., Amiri Delouei A., Karimnejad S., Sajadi H., Analytical solution of heat transfer in a cone made of functionally graded material. Amirkabir Journal of Mechanical Engineering, 2021, 53(1): 539–552.
[104]
Amiri Delouei A., Emamian A., Karimnejad S., Li Y., An exact analytical solution for heat conduction in a functionally graded conical shell. Journal of Applied and Computational Mechanics, 2023, 9(2): 302–317.
