[1]
Jafari M., Botterud A., Sakti A., Decarbonizing power systems: A critical review of the role of energy storage. Renewable & Sustainable Energy Reviews, 2022, 158: 112077.
[2]
Foley A., Lobera I.D., Impacts of compressed air energy storage plant on an electricity market with a large renewable energy portfolio. Energy, 2013, 57: 85–94.
[3]
Guo H., Xu Y., Kang H., et al., From theory to practice: Evaluating the thermodynamic design landscape of compressed air energy storage systems. Applied Energy, 2023, 352: 121858.
[4]
Cui S., He Q., Shi X., et al., Dynamic characteristics analysis for energy release process of liquid air energy storage system. Renewable Energy, 2021, 180: 744–755.
[5]
Guo H., Xu Y., Huang L., et al., Optimization strategy using corresponding-point methodology (CPM) concerning finite time and heat conduction rate for CAES systems. Energy, 2023, 266: 126336.
[6]
Hu S., Xu W., Jia G., et al., Efficiency analysis of an arrayed liquid piston isothermal air compression system for compressed air energy storage. Journal of Thermal Science, 2023, 32(1): 17–29.
[7]
Niu J., Zhang C., Li Y., et al., Design and investigation of cold storage material for large-scale application in supercritical compressed air energy storage system. Journal of Energy Storage, 2024, 75: 109680.
[8]
Zhang X., Li Y., Gao Z., et al., Overview of dynamic operation strategies for advanced compressed air energy storage. Journal of Energy Storage, 2023, 66: 107408.
[9]
Huang G., Zhu Y., Wang X., et al., Flow characteristics of last-segment axial turbine adopted in compressed air energy storage system under low load and windage conditions. International Journal of Energy Research, 2022, 46(15): 23908–23926.
[10]
Xiong J., Zhu Y., Wang X., et al., Blade solidity optimization of axial turbine in compressed air energy storage system. Journal of Energy Storage, 2023, 72: 108598.
[11]
Huang G., Zhu Y., Xiong J., et al., Review on the axial turbine long-blade stage characteristics under off-design conditions. Journal of mechanical engineering, 2024, 60(8): 271–290.
[12]
Day I.J., Stall, surge, and 75 years of research. Journal of Turbomachinery-Transactions of the ASME, 2016, 138(1): 011001.
[13]
Kameier F., Neise W., Rotating blade flow instability as a source of noise in axial turbomachines. Journal of Sound and Vibration, 1997, 203(5): 833–853.
[14]
Stenning A.H., Rotating stall and surge. Journal of Fluids Engineering, 1980, 102(1): 14–20.
[15]
Zhang Y., Lu X., Zhang Y., et al., Stall behavior in an ultrahigh-pressure-ratio centrifugal compressor: backward-traveling rotating stall. Journal of Turbomachinery-Transactions of the ASME, 2022, 144(10): 101010.
[16]
Chen Z., Wu Y., An G., Tip leakage flow, tip aerodynamic loading and rotating instability in a subsonic high-speed axial flow compressor rotor. Aerospace Science and Technology, 2021, 110: 106486.
[17]
Li T., Wu Y., Tian J., et al., Modal analysis of axial compressor tip rotating instability under varying operating conditions. Journal of Thermal Science, 2023, 32(4): 1345–1356.
[18]
Yang F., Wu Y., Chen Z., et al., The unsteadiness of tip leakage vortex breakdown and its role in rotating instability. Physics of Fluids, 2023, 35(10): 107108.
[19]
Dodds J., Vahdati M., Rotating stall observations in a high speed compressor-part I: Experimental study. Journal of Turbomachinery-Transactions of the ASME, 2015, 137(5): 051003.
[20]
Li T., Wu Y., Ouyang H., Numerical investigation of tip clearance effects on rotating instability of a low-speed compressor. Aerospace Science and Technology, 2021, 111: 106540.
[21]
Li W., Li E., Ji L., et al., Mechanism and propagation characteristics of rotating stall in a mixed-flow pump. Renewable Energy, 2020, 153: 74–92.
[22]
Pardowitz B., Moreau A., Tapken U., et al., Experimental identification of rotating instability of an axial fan with shrouded rotor. Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy, 2015, 229(5): 520–528.
[23]
Chen J., Johnson B., Hathaway M.D., et al., Flow characteristics of tip injection on compressor rotating spike via time-accurate simulation. Journal of Propulsion and Power, 2009, 25(3): 678–687.
[24]
Houghton T., Day I., Stability enhancement by casing grooves: The importance of stall inception mechanism and solidity. Journal of Turbomachinery-Transactions of the ASME, 2012, 134(2): 021003.
[25]
Margalida G., Joseph P., Roussette O., et al., Active flow control in an axial compressor for stability improvement: on the effect of flow control on stall inception. Experiments in Fluids, 2021, 62(1): 12.
[26]
Ye S., Zhao Q., Zhou X., et al., The impact of circumferential casing grooves on rotating instability in a transonic axial compressor. Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, 2019, 233(8): 2868–2893.
[27]
Megerle B., McBean I., Rice TS., et al., Unsteady aerodynamics of low-pressure steam turbines operating under low volume flow. Journal of Turbomachinery- Transactions of the ASME, 2014, 136(9): 091008.
[28]
Gerschütz W., Casey M., Truckenmüller F., Experimental investigations of rotating flow instabilities in the last stage of a low-pressure model steam turbine during windage. Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy, 2005, 219(A6): 499–510.
[29]
Zhang L., He L., Stüer H., A numerical investigation of rotating instability in steam turbine last stage. Journal of Turbomachinery-Transactions of the ASME, 2013, 135(1): 1544‒1562.
[30]
Zhang L., He L., Stüer H., 3-D time domain unsteady computation of rotating instability in steam turbine last stage. Copenhagen, Denmark. ASME conference, Paper No: GT2012-69045.
[31]
Zhang L., He L., Stüer H., Stator conditioning effects on steam turbine rotating instability. Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy, 2014, 228(4): 402–415.
[32]
Megerle B., Rice TS., McBean I., et al., Numerical and experimental investigation of the aerodynamic excitation of a model low-pressure steam turbine stage operating under low volume flow. Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 2013, 135(1): 012602.
[33]
Sigg R., Power A., Rice T., The characteristics of rotating instabilities in low pressure steam turbines at low volume flow operation. Montreal, Canada, ASME conference, Paper No: GT2015-43211.
[34]
Hu P., Lin T., Yang R., et al., Numerical investigation on flow instabilities in low-pressure steam turbine last stage under different low-load conditions. Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power and Energy, 2021, 235(6): 1544–1562.
[35]
Zhu X., Hu P., Lin T., et al., Numerical investigations on non-synchronous vibration and frequency lock-in of low-pressure steam turbine last stage. Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy, 2022, 236(4): 647–661.
[36]
Pütz O., Prediction of rotating instabilities in low pressure steam turbines operating at low load. Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 2022, 144(9): 091007.
[37]
Gao K., Wang C., Xie Y., et al., Effects of inlet chamber structure of the control stage on the unsteady aerodynamic force. Oslo, Norway, ASME conference, Paper No: GT2018-76632.
[38]
Wang X., Zhang X., Zuo Z., et al., Effect of chamber roughness and local smoothing on performance of a CAES axial turbine. Renewable Energy, 2021, 170: 500–516.
[39]
Guan Y., Li W., Zhu Y., et al., Aerodynamic performance and flow characteristics of a compressed air energy storage axial turbine with nozzle governing. Journal of Energy Storage, 2023, 63: 106967.
[40]
Lemmon E., Huber M., McLinden M., NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 9.1. Natl Std. Ref. Data Series (NIST NSRDS), National Institute of Standards and Technology, Gaithersburg, MD, 2013.
[41]
Yang J., Zhu X., Du Z., Numerical simulation on full circle skew stator with inlet annulus. Journal of Power Engineering, 2010, 30(6): 425–428.
[42]
Xiong J., Zhu Y., Wang X., et al., Non-uniform flow mechanism and effect induced by radial inlet chamber of axial turbine in compressed air energy storage system. Journal of Energy Storage, 2025, 113: 115603.
[43]
Hu P., Yang R., Zhu X., et al., Numerical investigation of the flow instability of steam turbine last stage under low mass flow condition. Journal of Engineering for Thermal Energy and Power, 2019, 34(10): 18–26.
[44]
Zhu X., Hu P., Lin T., et al., Numerical investigations on non-synchronous vibration and frequency lock-in of low-pressure steam turbine last stage. Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power and Energy, 2022, 236 (4): 647–661.
