[1] Xiao S., Nefodov D., Mclinden M.O., et al., Working fluid selection for heat pumps in solar district heating systems. Solar Energy, 2022, 236: 499–511.
[2] Wu Z., Sha L., Yang X., et al., Performance evaluation and working fluid selection of combined heat pump and power generation system (HP-PGs) using multi-objective optimization. Energy Conversion and Management, 2020, 221: 113164.
[3] Hamid K., Sajjad U., Ulrich Ahrens M., et al., Potential evaluation of integrated high temperature heat pumps: A review of recent advances. Applied Thermal Engineering, 2023, 230: 120720.
[4] Ganesan P., Eikevik T.M., Hamid K., et al., Thermodynamic analysis of cascade high-temperature heat pump using new natural zeotropic refrigerant mixtures: R744/R600 and R744/R601. International Journal of Refrigeration, 2023, 154: 215–230.
[5] Kosmadakis G., Estimating the potential of industrial (high-temperature) heat pumps for exploiting waste heat in EU industries. Applied Thermal Engineering, 2019, 156: 287–298.
[6] Lu P., Luo X., Wang J., et al., Thermodynamic analysis and evaluation of a novel composition adjustable Carnot battery under variable operating scenarios. Energy Conversion and Management, 2022, 269: 116117.
[7] Lu P., Luo X., Wang J., et al., Thermo-economic design, optimization, and evaluation of a novel zeotropic ORC with mixture composition adjustment during operation. Energy Conversion and Management, 2021, 230: 113771.
[8] Lu P., Wang J., Lin Y., et al., Experimental investigation of a zeotropic organic Rankine cycle system with liquid-separation condensation for composition adjustment. Energy Conversion and Management, 2023, 293: 117540.
[9] Yan S., Dong X., Nie F., et al., A new heat transfer model based on non-equilibrium film theory for annular flow condensation of binary zeotropic mixtures. International Journal of Heat and Mass Transfer, 2023, 205: 123899.
[10] Luo J., Lu P., Chen K., et al., Experimental and simulation investigation on the heat exchangers in an ORC under various heat source/sink conditions. Energy, 2023, 264: 126189.
[11] Nie F., Wang H., Zhao Y., et al., A universal correlation for flow condensation heat transfer in horizontal tubes based on machine learning. International Journal of Thermal Sciences, 2023, 184: 107994.
[12] Luo X., Xia Y., Huang J., et al., Experimental investigation on high-temperature flow boiling heat transfer characteristics of R245fa in a horizontal circular tube. Applied Thermal Engineering, 2023, 225: 120260.
[13] Mikielewicz D., Wajs J., Performance of the very high-temperature heat pump with low GWP working fluids. Energy, 2019, 182: 460–470.
[14] Qiao H., Yu X., Yang B., Working fluid design and performance optimization for the heat pump-organic Rankine cycle Carnot battery system based on the group contribution method. Energy Conversion and Management, 2023, 293: 117459.
[15] Ghim G., Lee J., Condensation heat transfer of low GWP ORC working fluids in a horizontal smooth tube. International Journal of Heat and Mass Transfer, 2017, 104: 718–728.
[16] Yang Z., Wu X., Peng J., Theoretical and experimental investigation on the flame-retarding characteristic of R245fa. Experimental Thermal and Fluid Science, 2013, 44: 613–619.
[17] Xi H., Li M.J., He Y.L., et al., Economical evaluation and optimization of organic Rankine cycle with mixture working fluids using R245fa as flame retardant. Applied Thermal Engineering, 2017, 113: 1056–1070.
[18] Mondal S., De S., Waste heat recovery through organic flash cycle (OFC) using R245fa-R600 mixture as the working fluid. Clean Technologies and Environmental Policy, 2019, 21(8): 1575–1586.
[19] Xu C., Yang H., Yu X., et al., Performance analysis for binary mixtures based on R245fa using in high temperature heat pumps. Energy Conversion and Management: X, 2021, 12: 100123.
[20] Pan L., Wang H., Chen Q., et al., Theoretical and experimental study on several refrigerants of moderately high temperature heat pump. Applied Thermal Engineering, 2011, 31(11): 1886–1893.
[21] Mateu-Royo C., Mota-Babiloni A., Navarro-Esbrí J., et al., Multi-objective optimization of a novel reversible High-Temperature Heat Pump-Organic Rankine Cycle (HTHP-ORC) for industrial low-grade waste heat recovery. Energy Conversion and Management, 2019, 197: 111908.
[22] Ma X., Zhang Y., Fang L., et al., Performance analysis of a cascade high temperature heat pump using R245fa and BY-3 as working fluid. Applied Thermal Engineering, 2018, 140: 466–475.
[23] Arpagaus C., Bless F., Uhlmann M., et al., High temperature heat pumps: Market overview, state of the art, research status, refrigerants, and application potentials. Energy, 2018, 152: 985–1010.
[24] Cavallini A., Bortolin S., Del Col D., et al., Condensation heat transfer and pressure losses of high- and low-pressure refrigerants flowing in a single circular minichannel. Heat Transfer Engineering, 2011, 32(2): 90–98.
[25] Cavallini A., Col D.D., Doretti L., et al., Condensation in horizontal smooth tubes: A new heat transfer model for heat exchanger design. Heat Transfer Engineering, 2006, 27(8): 31–38.
[26] Fazelnia H., Azarhazin S., Sajadi B., et al., Two-phase R1234yf flow inside horizontal smooth circular tubes: Heat transfer, pressure drop, and flow pattern. International Journal of Multiphase Flow, 2021, 140: 103668.
[27] Dobson M., Chato J., Hinde D., et al., Experimental evaluation of internal condensation of refrigerants R-134a and R-12. ASHRAE Transactions, 1993, 100(1): 744–754.
[28] Garimella S., Milkie J., Macdonald M., Condensation heat transfer and pressure drop of low-pressure hydrocarbons and synthetic refrigerants. International Journal of Heat and Mass Transfer, 2020, 161: 120295.
[29] Keniar K., Garimella S., Experimental investigation of refrigerant condensation in circular and square micro- and mini-channels. International Journal of Heat and Mass Transfer, 2021, 176: 121383.
[30] Dobson M.K., Chato J.C., Condensation in smooth horizontal tubes. Journal of Heat Transfer, 1998, 120(1): 193–213.
[31] Shah M.M., A general correlation for heat transfer during film condensation inside pipes. International Journal of Heat and Mass Transfer, 1979, 22(4): 547–556.
[32] Liu S.C., Song M., Dai B.M., et al., Experimental study on R245fa condensation heat transfer in horizontal smooth tube and enhanced tube. Energy Procedia, 2017, 142: 4169–4175.
[33] Huang X., Ding G., Hu H., et al., Influence of oil on flow condensation heat transfer of R410A inside 4.18 mm and 1.6 mm inner diameter horizontal smooth tubes. International Journal of Refrigeration, 2010, 33(1): 158–169.
[34] Guo Q., Li M., Gu H., Condensation heat transfer characteristics of low-GWP refrigerants in a smooth horizontal mini tube. International Journal of Heat and Mass Transfer, 2018, 126: 26–38.
[35] Koyama S., Kuwahara K., Nakashita K., Condensation of refrigerant in a multi-port channel. International Conference on Nanochannels, Microchannels, and Minichannels, New York, America, 2003, 36673: 193–205.
[36] Shah M.M., Comprehensive correlations for heat transfer during condensation in conventional and mini/micro channels in all orientations. International Journal of Refrigeration, 2016, 67: 22–41.
[37] Shah M.M., An improved and extended general correlation for heat transfer during condensation in plain tubes. HVAC&R Research, 2009, 15(5): 889–913.
[38] Camaraza-Medina Y., Hernandez-Guerrero A., Luviano-Ortiz J.L., et al., New model for heat transfer calculation during film condensation inside pipes. International Journal of Heat and Mass Transfer, 2019, 128: 344–353.
[39] Longo G.A., Mancin S., Righetti G., et al., Assessment of the low-GWP refrigerants R600a, R1234ze(Z) and R1233zd(E) for heat pump and organic Rankine cycle applications. Applied Thermal Engineering, 2020, 167: 114804.
[40] Akers W.W., Deans A., Crossee O.K., Condensing heat transfer within horizontal tubes. Chemical Engineering and Processing, 1959, 55: 171–176.
[41] Li W., Two-phase heat transfer correlations in three-dimensional hierarchical tube. International Journal of Heat and Mass Transfer, 2022, 191: 122827.
[42] Lim J., Song K.S., Kim D., et al., Condensation heat transfer characteristics of R245fa in a shell and plate heat exchanger for high-temperature heat pumps. International Journal of Heat and Mass Transfer, 2018, 127: 730–739.
[43] Zhang J., Kærn M.R., Ommen T., et al., Condensation heat transfer and pressure drop characteristics of R134a, R1234ze(E), R245fa and R1233zd(E) in a plate heat exchanger. International Journal of Heat and Mass Transfer, 2019, 128: 136–149.
[44] Hsieh Y.Y., Lin T., Evaporation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heat exchanger. International Journal of Heat and Mass Transfer, 2003, 125(5): 852–857.
[45] Hirose M., Ichinose J., Inoue N., Development of the general correlation for condensation heat transfer and pressure drop inside horizontal 4 mm small-diameter smooth and microfin tubes. International Journal of Refrigeration, 2018, 90: 238–248.
[46] Patel T., Parekh A., Tailor P., Experimental analysis of condensation heat transfer and frictional pressure drop in a horizontal circular mini channel. Heat and Mass Transfer, 2020, 56: 1579–1600.
[47] Kim S.-M., Mudawar I., Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flows. International Journal of Heat and Mass Transfer, 2012, 55(11–12): 3246–3261.
[48] Lockhart W., Proposed correlation of data for isothermal two-phase, two-component flow in pipes. Chemical Engineering Progress, 1949, 45(1): 39–48.
[49] Huang X., Ding G., Hu H., et al., Two-phase frictional pressure drop characteristics of R410A-oil mixture flow condensation inside 4.18 mm and 1.6 mm ID horizontal smooth tubes. HVAC&R Research, 2010, 16(4): 453–470.
[50] Wang L., Dang C., Hihara E., Experimental study on condensation heat transfer and pressure drop of low GWP refrigerant HFO1234yf in a horizontal tube. International Journal of Refrigeration, 2012, 35(5): 1418–1429.
[51] Haraguchi H., Koyama S., Fujii T., Condensation of refrigerants HCFC22, HFC134a and HCFC123 in a horizontal smooth tube: 1st report, proposals of empirical expressions for the local frictional pressure drop. Transactions of the Japan Society of Mechanical Engineers Series B, 1994, 60(574): 2111–2116.
[52] Khairul Bashar M., Nakamura K., Kariya K., et al., Development of a correlation for pressure drop of two-phase flow inside horizontal small diameter smooth and microfin tubes. International Journal of Refrigeration, 2020, 119: 80–91.
[53] Afroz H.M.M., Miyara A., Tsubaki K., Heat transfer coefficients and pressure drops during in-tube condensation of CO2/DME mixture refrigerant. International Journal of Refrigeration, 2008, 31(8): 1458–1466.
[54] Wang Z., Xu Z., Luo L., et al., Experimental investigation of condensation pressure drop of zeotropic refrigerant/oil mixtures in plate heat exchanger. International Journal of Refrigeration, 2023, 149: 192–203.
[55] Garcia Pabon J., Khosravi A., Nunes R., et al., Experimental investigation of pressure drop during two-phase flow of R1234yf in smooth horizontal tubes with internal diameters of 3.2 mm to 8.0 mm. International Journal of Refrigeration, 2019, 104: 426–436.
[56] Xu Y., Fang X., A new correlation of two-phase frictional pressure drop for evaporating flow in pipes. International Journal of Refrigeration, 2012, 35(7): 2039–2050.
[57] Wilson E., A basis for rational design of heat transfer apparatus. The Journal American Society Mechanical Engineers, 1915, 37: 546–551.
[58] Smith S.L., Void fractions in two-phase flow: A correlation based upon an equal velocity head model. Proceedings of the Institution of Mechanical Engineers, 1969, 184(1): 647–664.
[59] Gnielinski V., On heat transfer in tubes. International Journal of Heat and Mass Transfer, 2013, 63: 134–140.
[60] Liu N., Li J., Experimental study on pressure drop of R32, R152a and R22 during condensation in horizontal minichannels. Experimental Thermal and Fluid Science, 2016, 71: 14–24.
[61] Tandon T.N., Varma H.K., Gupta C.P., Heat transfer during forced convection condensation inside horizontal tube. International Journal of Refrigeration, 1995, 18: 210–214.
[62] Thome J.R., El Hajal J., Cavallini A., Condensation in horizontal tubes, part 2: New heat transfer model based on flow regimes. International Journal of Heat and Mass Transfer, 2003, 46(18): 3365–3387.
[63] Cavallini A., Censi G., Col D.D., et al., Condensation of halogenated refrigerants inside smooth tubes. HVAC&R Research, 2002, 8(4): 429–451.
[64] Dobson M.K., Chato J.C., Hinde D.K., et al., Experimental evaluation of internal condensation of refrigerants R-134a and R-12. ASHRAE Transactions, 1994, 100(1): 744–754.
[65] Haraguchi H., Koyama S., Fujii T., Condensation of refrigerants HCFC22, HFC134a and HCFC123 in a horizontal smooth tube: 2nd report, proposals of empirical expressions for local heat transfer coefficient. Transactions of the Japan Society of Mechanical Engineers Series B, 1994, 60: 245–252.
[66] Shao D., Granryd E., Flow pattern, heat transfer and pressure drop in flow condensation Part I: Pure and azeotropic refrigerants. HVAC&R Research, 2000, 6(2): 175–195.
[67] Shao D., Granryd E., Flow pattern, heat transfer and pressure drop in flow condensation Part II: Zeotropic Refrigerant Mixtures (NARMs). HVAC&R Research, 2000, 6(2): 197–209.
[68] Beattie D.R., Whalley P.B., Simple two-phase frictional pressure drop calculation method. International Journal of Multiphase Flow, 1982, 8(1): 83–87.
[69] Awad M., Muzychka Y., Effective property models for homogeneous two-phase flows. Experimental Thermal Fluid Science, 2008, 33(1): 106–113.
[70] Âzer N.Z., Abis L.V., Soliman H.J.A.T., Local heat transfer coefficients during annular flow condensation. ASHRAE Transactions, 1972, 78(2): 135–143.
[71] Tandon T.N., Varma H.K., Gupta C.P., A new flow regimes map for condensation inside horizontal tubes. Journal of Heat Transfer, 1982, 104: 763–767.
[72] Meyer J.P., Dirker J., Adelaja A.O., Condensation heat transfer in smooth inclined tubes for R134a at different saturation temperatures. International Journal of Heat and Mass Transfer, 2014, 70: 515–525.
[73] Juhee Jeong R.Y., A study on the condensation heat transfer coefficient of R1234ze(E) and R134a near critical point. International Journal of Refrigeration, 2021, 128: 83–94.
[74] Cavallini A., Censi G., Del Col D., et al., Experimental investigation on condensation heat transfer and pressure drop of new HFC refrigerants (R134a, R125, R32, R410A, R236ea) in a horizontal smooth tube. International Journal of Refrigeration, 2001, 24(1): 73–87.
[75] Jung D., Cho Y., Park K., Flow condensation heat transfer coefficients of R22, R134a, R407C, and R410A inside plain and microfin tubes. International Journal of Refrigeration, 2004, 27(1): 25–32.
[76] Jung D., Song K.-H., Cho Y., et al., Flow condensation heat transfer coefficients of pure refrigerants. International Journal of Refrigeration, 2003, 26(1): 4–11.
[77] Jassim E., Newell T., Chato J., Prediction of two-phase condensation in horizontal tubes using probabilistic flow regime maps. International Journal of Heat and Mass Transfer, 2008, 51(3–4): 485–496.
[78] Park K.-J., Jung D., Seo T., Flow condensation heat transfer characteristics of hydrocarbon refrigerants and dimethyl ether inside a horizontal plain tube. International Journal of Multiphase Flow, 2008, 34(7): 628–635.
[79] Hossain M.A., Onaka Y., Miyara A., Experimental study on condensation heat transfer and pressure drop in horizontal smooth tube for R1234ze(E), R32 and R410A. International Journal of Refrigeration, 2012, 35(4): 927–938.
[80] Garimella S., Milkie J., Macdonald M., Condensation of zeotropic mixtures of low-pressure hydrocarbons and synthetic refrigerants. International Journal of Heat and Mass Transfer, 2020, 162: 120301.
[81] Akers W., Condensation inside horizontal tubes. Chemical Engineering Progress Symposium Series, New York, America, 1960, 56(30): 145.
[82] Wang W.-W.W., Radcliff T.D., Christensen R.N., A condensation heat transfer correlation for millimeter-scale tubing with flow regime transition. Experimental Thermal Fluid Science, 2002, 26(5): 473–485.
[83] Cavallini A., Zecchin R., A dimensionless correlation for heat transfer in forced convection condensation. International Heat Transfer Conference Digital Library, Tokyo, Japan, 1974.
[84] Bohdal T., Charun H., Sikora M., Comparative investigations of the condensation of R134a and R404A refrigerants in pipe minichannels. International Journal of Heat Mass Transfer, 2011, 54(9–10): 1963–1974.
[85] Shah M.M., A general correlation for heat transfer during film condensation inside pipes. International Journal of Heat Mass Transfer, 1979, 22(4): 547–556.
