[1]
Møller K.T., Jensen T.R., Akiba E., et al., Hydrogen-A sustainable energy carrier. Progress in Natural Science: Materials International, 2017, 27(1): 34–40.
[2]
Dreizler A., Pitsch H., Scherer V., et al., The role of combustion science and technology in low and zero impact energy transformation processes. Applications in Energy and Combustion Science, 2021, 7: 100040.
[3]
Sun Z., Wu Q., Zhao C., et al., A review of
NOx control by mild-oxy combustion. Journal of the Energy Institute, 2024, 113: 101502.
[4]
Day M.S., Bell J.B., Gao X., et al., Numerical simulation of nitrogen oxide formation in lean premixed turbulent H2/O2/N2 flames. Proceedings of the Combustion Institute, 2011, 33(1): 1591–1599.
[5]
Mendiara T., Glarborg P., Ammonia chemistry in oxy-fuel combustion of methane. Combustion and Flame, 2009, 156(10): 1937–1949.
[6]
Skottene M., Rian K.E., A study of NO
x formation in hydrogen flames. International Journal of Hydrogen Energy, 2007, 32(15): 3572–3585.
[7]
Schefer R.W., White C., Keller J., Lean hydrogen combustion. Lean Combustion, Elsevier, 2008, pp. 213.
[8]
Kumar V., Gupta D., Kumar N., Hydrogen use in internal combustion engine: A review. International Journal of Advanced Culture Technology, 2015, 3(2): 87–99.
[9]
Du H., Chai W.S., Wei H., et al., Status and challenges for realizing low emission with hydrogen ultra-lean combustion. International Journal of Hydrogen Energy, 2024, 57: 1419–1436.
[10]
Griebel P., Gas turbines and hydrogen. Hydrogen Science and Engineering: Materials, Processes, Systems and Technology, 2016, pp: 1011–1032.
[11]
Marek C., Smith T., Kundu K., Low emission hydrogen combustors for gas turbines using lean direct injection. 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2005, Paper No. AIAA 2005-3776.
[12]
Kumar M.S., Muniyappan M., Selvan, S.A., Experimental and CFD analysis on the impact of hydrogen as fuel on the behavior of a passenger car gasoline direct injection engine. Journal of the Energy Institute, 2024, 113: 101487.
[13]
Alvarez C.E.C., Couto G.E., Roso V.R., et al., A review of prechamber ignition systems as lean combustion technology for SI engines. Applied Thermal Engineering, 2018, 128: 107–120.
[14]
Hu P., Zhai S., Experimental study of lean hydrogen-air mixture combustion in a 12 m3 tank. Progress in Nuclear Energy, 2021, 133: 103633.
[15]
Welch C., Erhard J., Shi H., et al., An experimental investigation of lean hydrogen flame instabilities in spark-ignition engines. Proceedings of the Combustion Institute, 2024, 40(1–4): 105391.
[16]
Aspden A., Day M., Bell J., Turbulence-chemistry interaction in lean premixed hydrogen combustion. Proceedings of the Combustion Institute, 2015, 35(2): 1321–1329.
[17]
Trabold C., Puck A., Gallas T., et al., Influence of hydro- gen combustion on engine components in full load operation. Internationaler Motorenkongress, Springer, 2024, pp. 117–129.
[18]
Stefan E., Talic B., Larring Y., et al., Materials challenges in hydrogen-fuelled gas turbines. International Materials Reviews, 2022, 67(5): 461–486.
[19]
Djukic M.B., Zeravcic V.S., Bakic G.M., et al., Hydrogen damage of steels: A case study and hydrogen embrittlement model. Engineering Failure Analysis, 2015, 58: 485–498.
[20]
Sun B., Zhao H., Dong X., et al., Current challenges in the utilization of hydrogen energy-a focused review on the issue of hydrogen-induced damage and embrittlement. Advances in Applied Energy, 2024, 14: 100168.
[21]
Hasan M.S., Kapci M.F., Bal B., et al., An atomistic study on the help mechanism of hydrogen embrittlement in pure metal Fe. International Journal of Hydrogen Energy, 2024, 57: 60–68.
[22]
Röthig M., Hoschke J., Tapia C., et al., A review of gas phase inhibition of gaseous hydrogen embrittlement in pipeline steels. International Journal of Hydrogen Energy, 2024, 60: 1239–1265.
[23]
Jin Q., Dai G., Wang Y., et al., High-temperature corrosion of water-wall tubes in oxy-combustion atmosphere. Journal of the Energy Institute, 2020, 93(4): 1305–1312.
[24]
Zhang T., Fetzer R., Heinzel A., et al., Corrosion behavior of various conductive materials in Sb3Sn7 alloy at 450°C. Corrosion Science, 2024, 227: 111797.
[25]
Wright I.G., Dooley R., A review of the oxidation behaviour of structural alloys in steam. International Materials Reviews, 2010, 55(3): 129–167.
[26]
Saunders S., Monteiro M., Rizzo F., The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: A review. Progress in materials science, 2008, 53(5): 775–837.
[27]
Ugraram R., Reddy B., Reddy R.M., Thermo-mechanical stress and fatigue life analysis of diesel engine piston with oxy-fuel combustion and comparison with conventional air combustion. AIP Conference Proceedings, 2023, 2869(1): 040001.
[28]
Pierce D., Haynes A., Hughes J., et al., High temperature materials for heavy duty diesel engines: Historical and future trends. Progress in Materials Science, 2019, 103: 109–179.
[29]
Alnaeli M., Alnajideen M., Navaratne R., et al., High-temperature materials for complex components in ammonia/hydrogen gas turbines: A critical review. Energies, 2023, 16(19): 6973.
[30]
Wang D., Xing Y., Lee M., et al., Effects of wall temperature and water vapor on the nitriding of stainless steel induced by ammonia flames. Proceedings of the Combustion Institute, 2024, 40(1–4): 105562.
[31]
Xu S.T., Tu Y.J., Huang P., et al., Effects of wall temperature on methane MILD combustion and heat transfer behaviors with non-preheated air. Applied Thermal Engineering, 2020, 174: 115282.
[32]
Stahl G., Warnatz J., Numerical investigation of time-dependent properties and extinction of strained methane- and propane-air flamelets. Combustion and Flame, 1991, 85(3–4): 285–299.
[33]
Dunn-Rankin D., Lean combustion: Technology and control. Academic Press, 2011.
[34]
Maas U., Warnatz J., Ignition processes in hydrogen- oxygen mixtures. Combustion and Flame, 1988, 74(1): 53–69.
[35]
Capurso T., Laera D., Riber E., et al.,
NOx pathways in lean partially premixed swirling H2-air turbulent flame. Combustion and Flame, 2023, 248: 112581.
[36]
Konnov A., Colson G., De Ruyck J., No formation rates for hydrogen combustion in stirred reactors. Fuel, 2001, 80(1): 49–65.
[37]
Hosseini E., Popovich V., A review of mechanical properties of additively manufactured Inconel 718. Additive Manufacturing, 2019, 30: 100877.
[38]
Sonar T., Balasubramanian V., Malarvizhi S., et al., An overview on welding of Inconel 718 alloy-effect of welding processes on microstructural evolution and mechanical properties of joints. Materials Characterization, 2021, 174: 110997.
[39]
Woo W.-S., Lee C.-M., A study of the machining characteristics of AISI 1045 steel and Inconel 718 with a cylindrical shape in laser-assisted milling. Applied Thermal Engineering, 2015, 91: 33–42.
[40]
Bataillou L., Martinelli L., Desgranges C., et al., Growth kinetics and characterization of chromia scales formed on Ni-30Cr alloy in impure argon at 700°C. Oxidation of Metals, 2020, 93: 329–353.
[41]
Greene G., Finfrock C., Oxidation of Inconel 718 in air at high temperatures. Oxidation of Metals, 2001, 55: 505–521.
[42]
Nnaji R., Bodude M., Osoba L., et al., Study on high- temperature oxidation kinetics of Haynes 282 and Inconel 718 nickel-based superalloys. The International Journal of Advanced Manufacturing Technology, 2020, 106: 1149–1160.
[43]
Unocic K.A., Pint B., Effect of environment on the high temperature oxidation behavior of 718 and 718plus. In: 8th International Symposium on Superalloy 718 and Derivatives, 2014, pp. 667–677.
[44]
Yu C., Böhlke T., Valera-Medina A., et al., Flame-solid interaction: Thermomechanical analysis for a steady laminar stagnation flow stoichiometric NH
3-H
2 flame at a plane wall. Energy & Fuels, 2023, 37(4): 3294–3306.
[45]
Law C.K., Sung C., Yu G., et al., On the structural sensitivity of purely strained planar premixed flames to strain rate variations. Combustion and Flame, 1994, 98(1–2): 139–154.
[46]
Egolfopoulos F.N., Zhang H., Zhang Z., Wall effects on the propagation and extinction of steady, strained, laminar premixed flames. Combustion and Flame, 1997, 109(1–2): 237–252.
[47]
Jeon J., Shin D., Choi W., et al., Identification of the extinction mechanism of lean limit hydrogen flames based on Lewis number effect. International Journal of Heat and Mass Transfer, 2021, 174: 121288.
[48]
Fernández-Galisteo D., Sánchez A., Liñán A., et al., The hydrogen-air burning rate near the lean flammability limit. Combustion Theory and Modelling, 2009, 13(4): 741–761.
[49]
Dabireau F., Cuenot B., Vermorel O., et al., Interaction of flames of H2+O2 with inert walls. Combustion and Flame, 2003, 135(1–2): 123–133.
[50]
Dwivedi S.K., Vishwakarma M., Hydrogen embrittlement in different materials: A review. International Journal of Hydrogen Energy, 2018, 43(46): 21603–21616.
[51]
Omura T., Nakamura J., Hirata H., et al., Effect of surface hydrogen concentration on hydrogen embrittlement properties of stainless steels and Ni based alloys. ISIJ International, 2016, 56(3): 405–412.
[52]
Sohn C., Jeong I., Chung S., Numerical study of the effects of pressure and air-dilution on NO formation in laminar counterflow diffusion flames of methane in high temperature air. Combustion and Flame, 2002, 130(1–2): 83–93.
[53]
Niemann U., Seshadri K., Williams F.A., Methane, ethane, and ethylene laminar counterflow diffusion flames at elevated pressures: Experimental and computational investigations up to 2.0 MPa. Combustion and Flame, 2014, 161(1): 138–146.
[54]
Deng S., Han D., Law C.K., Ignition and extinction of strained nonpremixed cool flames at elevated pressures. Combustion and Flame, 2017, 176: 143–150.
[55]
Nanninga N., Levy Y., Drexler E.S., et al., Comparison of hydrogen embrittlement in three pipeline steels in high pressure gaseous hydrogen environments. Corrosion Science, 2012, 59: 1–9.
[56]
Michler T., Yukhimchuk A.A., Naumann J., Hydrogen environment embrittlement testing at low temperatures and high pressures. Corrosion Science, 2008, 50(12): 3519–3526.
[57]
Wang X., Law C.K., An analysis of the explosion limits of hydrogen-oxygen mixtures. The Journal of Chemical Physics, 2013, 138(13): 134305.
[58]
Xu S., Xi L., Tian S., et al., Numerical investigation of pressure and H
2O dilution effects on no formation and reduction pathways in pure hydrogen mild combustion. Applied Energy, 2023, 350: 121736.
[59]
Frassoldati A., Faravelli T., Ranzi E., A wide range modeling study of
NOx formation and nitrogen chemistry in hydrogen combustion. International Journal of Hydrogen Energy, 2006, 31(15): 2310–2328.
