[1] Haile S.M., Fuel cell materials and components. Acta Materialia, 2003, 51: 5981–6000. 
[2] Appleby A.J., Fuel cell technology: Status and future prospects. Energy, 1996, 21(7–8): 521–653.
[3] Arshad A., Ali H.M., Habib A., et al., Energy and exergy analysis of fuel cells: A review. Thermal Science and Engineering Progress, 2019, 9: 308–321.
[4] Hamelin J., Agbossou K., Laperriere A., et al., Dynamic behavior of a PEM fuel cell stack for stationary applications. International Journal of Hydrogen Energy, 2001, 26(6): 625–629.
[5] Dyer C.K., Fuel cells for portable applications. Journal of Power Sources, 2002, 106(1–2): 31–34. 
[6] Krumpelt M., Krause T.R., Carter J.D., et al., Fuel processing for fuel cell systems in transportation and portable power applications. Catalysis Today, 2002, 77(1): 3–16. 
[7] Mat Z.A., Kar B.K., Hasmady S., Proton exchange membrane (PEM) and solid oxide (SOFC) fuel cell based vehicles—A review. 2017 2nd IEEE International Conference on Intelligent Transportation Engineering (ICITE), 2017, Sep 1–3, Singapore.
DOI: 10.1109/ICITE.2017.8056893.
[8] Sharaf O.Z., Orhan M.F., An overview of fuel cell technology: Fundamentals and applications. Renewable & Sustainable Energy Reviews, 2014, 32: 810–853. 
[9] Zaidi S.M.J., Rauf M.A., Fuel cell fundamentals. Springer US, 2009.
[10] Esfe M.H., Afrand M., A review on fuel cell types and the application of nanofluid in their cooling. Journal of Thermal Analysis and Calorimetry, 2020, 140(4): 1633–1654.
[11] Huang C., Lin J., Pan W., et al., Alkaline direct ethanol fuel cell performance using alkali-impregnated polyvinyl alcohol/functionalized carbon nano-tube solid electrolytes. Journal of Power Sources, 2016, 303(30): 267–277.
[12] Andrea L., Hossein M., Vitaliano C., et al., Dealing with fuel contaminants in biogas-fed solid oxide fuel cell (SOFC) and molten carbonate fuel cell (MCFC) plants: Degradation of catalytic and electro-catalytic active surfaces and related gas purification methods. Progress in Energy & Combustion Science, 2017, 61: 150–188. 
[13] Celik M., Genc G., Elden G., et al., The effect of porosity on performance of phosphoric acid doped polybenzimidazole polymer electrolyte membrane fuel cell. EPJ Web of Conferences, 2016, 114: 02010. 
[14] Powell M., Meinhardt K., Sprenkle V., et al., Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel cell applications. Energy, 2017, 125: 614–628.
[15] Fergus J., Solid oxide fuel cells: Materials properties and performance. Green Chemistry & Chemical Engineering, 2008, 30(11): 1485–1496.
[16] Kendall K., Kendall M., High-temperature solid oxide fuel cells for the 21st century: fundamentals. Design and Applications: Second Edition, 2015.
[17] Stambouli A.B., Traversa E., Solid Oxide Fuel Cells (SOFCs): A review of an environmentally clean and efficient source of energy. Renewable and Sustainable Energy Reviews, 2002, 6(5): 433–455. 
[18] Brett D.J.L., Atkinson A., Brandon N.P., et al., Intermediate temperature solid oxide fuel cells. Chemical Society Reviews, 2008, 37(8): 1568–1578.
[19] Ormerod R.M., Solid oxide fuel cells. Chemical Society Reviews, 2002, 32: 17–28.
[20] Brandon N.P. Skinner S., Steele B.C.H., Recent advances in materials for fuel cells. Annual Review of Materials Research, 2003, 33(1): 183–213.
[21] Minh N.Q., Solid oxide fuel cell technology—features and applications. Solid State Ionics, 2004, 174(1–4): 271–277. 
[22] Singh P., Minh N.Q., Solid oxide fuel cells: technology status. International Journal of Applied Ceramic Technology, 2004, 1(1): 5–15.
[23] Radenahmad N., Azad A.T., Saghir M., et al., A review on biomass derived syngas for SOFC based combined heat and power application. Renewable and Sustainable Energy Reviews, 2020, 119: 109560. 
[24] Ramadhani F., Hussain M.A., Mokhlis H., et al., Optimization strategies for Solid Oxide Fuel Cell (SOFC) application: A literature survey. Renewable and Sustainable Energy Reviews, 2017, 76: 460–484.
[25] Singhal S.C., Advances in solid oxide fuel cell technology. Solid State Ionics, 2000, 135(1–4): 305–313. 
[26] Sharaf O.Z., Orhan M.F., An overview of fuel cell technology: Fundamentals and applications. Renewable & Sustainable Energy Reviews, 2014, 32: 810–853. 
[27] Adams T.A., Nease J., Tucker D., et al., Energy conversion with solid oxide fuel cell systems: a review of concepts and outlooks for the short-and long-term. Industrial & Engineering Chemistry Research, 2013, 52(9): 3089–3111.
[28] Choudhury A., Chandra H., Arora A., Application of solid oxide fuel cell technology for power generation—A review. Renewable & Sustainable Energy Reviews, 2013, 20: 430–442.
[29] Dziurdzia B., Magonski Z., Jankowski H., Commercialisation of Solid Oxide Fuel Cells- opportunities and forecasts. IOP Conference Series: Materials Science and Engineering, 2016, 104(1): 012020.
[30] Fernandes M.D., De P.A.S.T., Bistritzki V.N., et al., SOFC-APU systems for aircraft: A review. International Journal of Hydrogen Energy, 2018, 43: 16311–16333.
[31] Arsalis A., A comprehensive review of fuel cell-based micro-combined-heat-and-power systems. Renewable and Sustainable Energy Reviews, 2019, 105: 391–414.
[32] Kho E.T., Scott J., Amal R., Ni/TiO2 for low temperature steam reforming of methane. Chemical Engineering Science, 2016, 140: 161–170.
[33] Li K., Jia L., Wang X., et al., Methane on-cell reforming in nickel-iron alloy supported solid oxide fuel cells. Journal of Power Sources, 2015, 284: 446–451.
[34] Ibrahim A.A., Fakeeha A.H., Al-Fatesh A.S., et al., Methane decomposition over iron catalyst for hydrogen production. International Journal of Hydrogen Energy, 2015, 40(24): 7593–7600. 
[35] Zhang Y., Wang W., Wang Z., et al., Steam reforming of methane over Ni/SiO2 catalyst with enhanced coke resistance at low steam to methane ratio. Catalysis Today, 2015, 256: 130–136.
[36] Angeli S.D., Turchetti L., Monteleone G., et al., Catalyst development for steam reforming of methane and model biogas at low temperature. Applied Catalysis B: Environmental, 2016, 181: 34–46.
[37] Lanzini A., Ferrero D., Papurello D., et al., Reporting degradation from different fuel contaminants in Ni-anode SOFCs. Fuel Cells, 2017, 17(4): 423–433.
[38] Kuramoto K., Hosokai S., Matsuoka K., et al., Degradation behaviors of SOFC due to chemical interaction between Ni-YSZ anode and trace gaseous impurities in coal syngas. Fuel Processing Technology, 2017, 160: 8–18.
[39] Papurello D., Silvestric S., Modena S., Biogas trace compounds impact on high-temperature fuel cells short stack performance. International Journal of Hydrogen Energy, 2021, 46(12): 8792–8801.
[40] Wasajja H., Lindebooma R.E.F., van Lier J.B., et al., Techno-economic review of biogas cleaning technologies for small scale off-grid solid oxide fuel cell applications. Fuel Processing Technology, 2020, 197: 106215.
[41] Papurello D., Tognanac L., Lanzinia A., et al., Proton transfer reaction mass spectrometry technique for the monitoring of volatile sulfur compounds in a fuel cell quality clean-up system. Fuel Processing Technology, 2015, 130: 136–146.
[42] Papurello D., Tomasib L., Silvestri S., et al., Evaluation of the Wheeler-Jonas parameters for biogas trace compounds removal with activated carbons. Fuel Processing Technology, 2016, 152: 93–101.
[43] Cho C.K., Choi B.H., Lee K.T., Electrochemical performance of Ni1–xFex-Ce0.8Gd0.2O1.9 cermet anodes for solid oxide fuel cells using hydrocarbon fuel. Ceramics International, 2013, 39(1): 389–394.
[44] Miyake M., Iwami M., Goto K., et al., Intermediate-temperature solid oxide fuel cell employing reformed effective biogas: power generation and inhibition of carbon deposition. Journal of Power Sources, 2017, 340: 319–324.
[45] Bian L.Z, Chen Z.Y., Wang L.J., et al., Electrochemical performance and carbon deposition of anode-supported solid oxide fuel cell exposed to H2CO fuels. International Journal of Hydrogen Energy, 2017, 42(20): 14246– 14252.
[46] Kubota J., Hashimoto S., Shindo T., et al., Self-modification of Ni metal surfaces with CeO2 to suppress carbon deposition at solid oxide fuel cell anodes. Fuel Cells, 2017, 17(3): 402–406.
[47] Motylinski K., Skrzypkiewicz M., Wierzbicki M., et al., Effects of the gas velocity on formation of the carbon deposits on fuel electrode of AS-SOFC. Journal of Power Technologies, 2018, 98(4): 322–328.
[48] Zhu Y., Jiang P., Geometry optimization study of ejector in anode recirculation solid oxygen fuel cell system. 2011 6th IEEE Conference on Industrial Electronics and Applications. IEEE, 2011, August 04, Beijing, China. DOI: 10.1109/ICIEA.2011.5975549.
[49] Zhu Y., Cai W., Li Y., et al., Anode gas recirculation behavior of a fuel ejector in hybrid solid oxide fuel cell systems: Performance evaluation in three operational modes. Journal of Power Sources, 2008, 185(2): 1122–1130.
[50] Chen Z., Guo S., Qin C., Experimental research on porous media combustion of SOFC exhaust gas. Case Studies in Thermal Engineering, 2020, 22: 100796.
[51] Tanaka Y., Sato K., Yamamoto A., Kato T., Development of anode off-gas recycle blowers for high efficiency SOFC systems. ECS Transactions, 2013, 57(1): 443–450. 
[52] Hou J.B., Yang M., Zhang J.L., Active and passive fuel recirculation for solid oxide and proton exchange membrane fuel cells. Renewable Energy, 2020, 155: 1355–1371.
[53] Wagner P.H., Wuillemin Z., Constantin D., et al., Experimental characterization of a solid oxide fuel cell coupled to a steam-driven micro anode off-gas recirculation fan. Applied Energy, 2020, 262: 114219.
[54] Bae H.J., Ban H.S., Noh Y.G., et al., The study of the design and control for the hydrogen recirculation blower noise and vibration reduction. Transactions of the Korean Hydrogen and New Energy Society, 2014, 25(5): 509– 515.
[55] Engelbracht M., Peters R., Blum L., et al., Comparison of a fuel-driven and steam-driven ejector in solid oxide fuel cell systems with anode off-gas recirculation: Part-load behavior. Journal of Power Sources, 2015, 277: 251–260.
[56] Borglum B., Ghezel-Ayagh H., Development of solid oxide fuel cells at versa power systems and fuel cell energy. ECS Transactions, 2013, 57(1): 61–66. 
[57] Rechberger J., Reissig M., Hauth M., AVL SOFC systems on the way of industrialization. Transactions, 2013, 57(1): 141–148.
[58] Liu Y., Tu Z., Chan S.H., Applications of ejectors in proton exchange membrane fuel cells: A review. Fuel Processing Technology, 2021, 214: 106683.
[59] Liu Z.R., Liu Z., Jiao K., et al., Numerical investigation of ejector transient characteristics for a 130-kW PEMFC system. International Journal of Energy Research, 2020, 44(5): 3697–3710. 
[60] Baba S., Takahashi S., Kobayashi N., et al., Performance of anodic recirculation by a variable flow ejector for a solid oxide fuel cell system under partial loads. International Journal of Hydrogen Energy, 2020, 45(16): 10039–10049.
[61] Hou J., Yang M., Zhang J., Active and passive fuel recirculation for solid oxide and proton exchange membrane fuel cells. Renewable Energy, 2020, 155: 1355–1371. 
[62] Kuo J.K., Jiang W.Z., Li C.H., et al., Numerical investigation into hydrogen supply stability and I-V performance of PEM fuel cell system with passive venturi ejector. Applied Thermal Engineering, 2020, 169: 114908. 
[63] Toghyani S., Afshari E., Baniasadi E., A parametric comparison of three fuel recirculation system in the closed loop fuel supply system of PEM fuel cell. International Journal of Hydrogen Energy, 2019, 44(14): 7518–7530.
[64] Braimakis K., Solar ejector cooling systems: A review. Renewable Energy, 2021, 164: 566–602.
[65] Tashtoush B.M., Al-Nimr M.A., Khasawneh M.A., A comprehensive review of ejector design, performance, and applications. Applied Energy, 2019, 240: 138–172. 
[66] Elbel S., Lawrence N., Review of recent developments in advanced ejector technology. International Journal of Refrigeration, 2016, 62: 1–18. 
[67] Pianthong K., Seehanam W., Behnia M., Investigation and improvement of ejector refrigeration system using computational fluid dynamics technique. Energy Conversion & Management, 2007, 48(9): 2556–2564.
[68] Besagni G., Mereu R., Inzoli F., Ejector refrigeration: a comprehensive review. Renewable & Sustainable Energy Reviews, 2016, 53: 373–407. 
[69] Yang Y., Zhu X., Yan Y., Performance of supersonic steam ejectors considering the nonequilibrium condensation phenomenon for efficient energy utilization. Applied Energy, 2019, 242: 157–167.
[70] Li Y., Yu J., The effects of ejector geometry parameter and refrigerant charge amount on an ejector-expansion refrigeration system. Applied Thermal Engineering, 2019, 152: 402–408.
[71] Braimakis K., Solar ejector cooling systems: A review. Renewable Energy, 2021, 164: 566–602.
[72] Tang Y., Liu Z., Li Y., et al., Combined auxiliary entrainment and structure optimization for performance improvement of steam ejector with consideration of back pressure variation. Energy Conversion and Management, 2018, 166: 163–173.
[73] Wang K., Wang L., Jia L., et al., Optimization design of steam ejector primary nozzle for MED-TVC desalination system. Desalination, 2019, 471: 114070.
[74] Tang Y., Liu Z., Shi C., et al., A novel steam ejector with pressure regulation to optimize the entrained flow passage for performance improvement in MED-TVC desalination system. Energy, 2018, 158: 305–316.
[75] Huang B.J., Chang J.M., Wang C.P., et al., A 1-D analysis of ejector performance. International Journal of Refrigeration, 2019, 22(5): 354–364. 
[76] Xue H.Y., Wang L., Jia L., et al., Design and investigation of a two-stage vacuum ejector for MED- TVC system. Applied Thermal Engineering, 2019, 167: 114713.
[77] Rogie B., Kaern M R., Wen C., et al., Numerical optimization of a novel gas-gas ejector for fuelling of hydrogen vehicles. International Journal of Hydrogen Energy, 2020, 45(41): 21905–21919. 
[78] Hosseinzadeh E., Rokni M., Jabbari M., et al., Numerical analysis of transport phenomena for designing of ejector in PEM forklift system. International Journal of Hydrogen Energy, 2014, 39(12): 6664–6674. 
[79] Tanga Y., Liu Z., Lia Y., et al., A double-choking theory as an explanation of the evolution laws of ejector performance with various operational and geometrical parameters. Energy Conversion and Management, 2020, 206: 112499.
[80] Brunner D.A., Marcks S., Bajpai M., et al., Design and characterization of an electronically controlled variable flow rate ejector for fuel cell applications. International Journal of Hydrogen Energy, 2012, 37(5): 4457–4466.
[81] Ray E.R., Veyo S.E., High temperature solid oxide fuel cell: Customer test units. Joint Contractors Meeting on Advanced Turbine Systems, Fuel Cells and Coal-fired Heat, Morgantown, United States, 1993, Aug 3–5. 
[82] Riensche E., Meusinger J., Stimming U., et al., Optimization of a 200 kW SOFC cogeneration power plant. Part ii: variation of the flowsheet. Journal of Power Sources, 1998, 71: 306–314.
[83] Vincenzo L., Pagh N.M., Knudsen K.S., Ejector design and performance evaluation for recirculation of anode gas in a micro combined heat and power systems based on solid oxide fuel cell. Applied Thermal Engineering, 2013, 54(1): 26–34. 
[84] Takeguchi T., Kani Y., Yano T., et al., Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets. Journal of Power Sources, 2002, 112(2): 588–595.
[85] Dicks A.L., Hydrogen generation from natural gas for the fuel cell systems of tomorrow. Journal of Power Sources, 1996, 61(1–2): 113–124. 
[86] Zhu Y., Cai W., Wen C., Fuel ejector design and simulation model for anodic recirculation SOFC system. Journal of Power Sources, 2007, 173(1): 437–449. 
[87] Genc O., Toros S., Timurkutluk B., Determination of optimum ejector operating pressures for anodic recirculation in SOFC systems. International Journal of Hydrogen Energy, 2017, 42(31): 20241–20251.
[88] Genc O., Toros S., Timurkutluk B., Geometric optimization of an ejector for a 4 kW SOFC system with anode off-gas recycle. International Journal of Hydrogen Energy, 2018, 43(19): 9413–9422. 
[89] Marsano F., Magistri L., Massardo A.F., Ejector performance influence on a solid oxide fuel cell anodic recirculation system. Journal of Power Sources, 2004, 129(2): 216–228.
[90] Zhu Y., Li Y., Cai W., Control oriented modeling of ejector in anode gas recirculation solid oxygen fuel cell systems. Energy Conversion and Management, 2011, 52(4): 1881–1889. 
[91] Genc O., Toros S., Timurkutluk B., Influence of anode exhaust gas flow direction on the performance of a fuel ejector for solid oxide fuel cells. International Congress on Engineering and Life Science (ICELIS 2018), 2018, Kastamonu, Turkey. 
[92] Liu M., Lcmzini A., Halliop W., et al., Anode recirculation behavior of a solid oxide fuel cell system: A safety analysis and a performance optimization. International Journal of Hydrogen Energy, 2013, 38(6): 2868–2883. 
[93] Abbas S.Z., Dupont V., Mahmud T., Modelling of high purity H2 production via sorption enhanced chemical looping steam reforming of methane in a packed bed reactor. Fuel, 2017, 202: 271–286.
[94] Sheu, Elysia J., Mokheimer E.M.A., et al., A review of solar methane reforming systems. International Journal of Hydrogen Energy, 2015, 40(38): 12929–12955. 
[95] Ghang T.G., Lee S.M., Ahn K.Y., et al., An experimental study on the reaction characteristics of a coupled reactor with a catalytic combustor and a steam reformer for SOFC systems. International Journal of Hydrogen Energy, 2012, 37(4): 3234–3241. 
[96] Bernardi D., Travis R., Design and analysis of the basic components in a SOFC anode cycle. Engineering Systems Design and Analysis. 2006, 42487: 99–105.
[97] Zhu Y., Cai W., Wen C., et al., Numerical investigation of geometry parameters for design of high performance ejectors. Applied Thermal Engineering, 2009, 29(5–6): 898–905.
[98] Genc O., Timurkutluk B., Toros S., Performance evaluation of ejector with different secondary flow directions and geometric properties for solid oxide fuel cell applications. Journal of Power Sources, 2019, 421: 76–90. 
[99] Ferrari M.L., Pascenti M., Massardo A.F., Validated ejector model for hybrid system applications. Energy, 2018, 162: 1106–1114. 
[100] Baba S., Takahashi S., Kobayashi N., et al., Performance of anodic recirculation by a variable flow ejector for a solid oxide fuel cell system under partial loads. International Journal of Hydrogen Energy, 2020, 45(16): 10039–10049. 
[101] Munts V.A., Volkova Y.V., Ershov M.I., Development and testing of the 3D printed plastic ejector prototype for the SOFC anode gas recirculation. 2018 International Multi-Conference on Industrial Engineering and Modern Technologies. DOI: 10.1109/FarEastCon.2018.8602613.
[102] Jia Y., Na W., Ling W., et al., Optimization on ejector key geometries of a two-stage ejector-based multi-evaporator refrigeration system. Energy Conversion and Management, 2018, 175: 142–150.
[103] Wang X., Wang L., Song Y., et al., Optimal design of two-stage ejector for subzero refrigeration system on fishing vessel. Applied Thermal Engineering, 2021, 187(3): 116565.
[104] Yadav S., Pandey K.M., Kumar V., et al., Computational analysis of a supersonic two-stage ejector. Materials Today: Proceedings, 2021, 38: 2700–2705.
[105] Chen W., Chen H., Shi C., et al., A novel ejector with a bypass to enhance the performance. Applied Thermal Engineering, 2016, 93: 939–946.
[106] Chen W., Fan J., Huang C., et al., Numerical assessment of ejector performance enhancement by means of two-bypass inlets. Applied Thermal Engineering, 2020, 171: 115086. 
[107] Liso V., Olesen A.C., Nielsen M.P., et al., Performance comparison between partial oxidation and methane steam for SOFC micro-CHP systems. Energy, 2011 36(7): 4216–4226.
[108] Dietrich R.U., Lindermeir A., Immisch C., et al., SOFC system using a hot gas ejector for off gas recycling for high efficient power generation from propane. ECS Transactions, 2013, 57(1): 171–184.
[109] Baba S., Kobayashi N., Takahashi S., et al., Development of anode gas recycle system using ejector for 1 kW solid oxide fuel cell. Journal of Engineering for Gas Turbines & Power, 2014, 137(2): 021504. 
[110] Baba S., Takahashi S., Kobayashi N., et al., Evaluation of solid oxide fuel cell performance with anode recirculation using variable flow ejector at rated conditions. Mechanical Engineering Journal, 2015, 2(4): 15-00087. DOI: 10.1299/mej.15-00087.
[111] Lee K., Kang S., Ahn K.Y., Development of a highly efficient solid oxide fuel cell system. Applied Energy, 2017, 205: 822–833.
[112] Giapa V.T., Kima Y.S., Leea Y.D., et al., Waste heat utilization in reversible solid oxide fuel cell systems for electrical energy storage: Fuel recirculation design and feasibility analysis. Journal of Energy Storage, 2020, 29: 101434. 
[113] Ozgoli H.A., Moghadasi M., Farhani F., et al., Modeling and simulation of an integrated gasification SOFC-CHAT cycle to improve power and efficiency. Environmental Progress & Sustainable Energy, 2017, 36(2): 610–618.
[114] Baba S., Ohguri N., Suzuki Y., et al., Evaluation of a variable flow ejector for anode gas circulation in a 50-kW class SOFC. International Journal of Hydrogen Energy, 2020, 45(19): 11297–11308. 
[115] Kim M., Lee W.Y., Kim C.S., Development of the variable multi-ejector for a mini-bus PEMFC system. ECS Transactions, 2007, 5: 773–780.
[116] Xue H., Wang L., Zhang H., et al., Design and investigation of multi-nozzle ejector for PEMFC hydrogen recirculation. International Journal of Hydrogen Energy, 2020, 45(28): 14500–14516.