ZHANG Wenjie
,
ZHAO Yingbo
,
LIU Wei
,
GONG Tongdan
,
LIU Kangyong
. Heat Transfer Model Founded and Regional Suitability Analysis of Photovoltaic Walls with Different Structures[J]. 热科学学报, 2022
, 31(6)
: 1970
-1989
.
DOI: 10.1007/s11630-022-1649-y
The heat transfer performance and suitability of photovoltaic walls with different structures in different regions have been studied. First, a quasi-two-dimensional calculation model was established to realize the simulation of photovoltaic walls with three structural forms (ordinary wall with air layer opening, air layer closed and no air layer); combined with the experimental data, the accuracy of the two-dimensional calculation model was verified. Based on the simulation results, the suitability of different structural forms of photovoltaic walls in areas with different climatic conditions were compared and analyzed. The results of the study show that the southern China that emphasize the purpose of ventilation and heat dissipation should adopt photovoltaic walls with open air layers, and the northern regions that emphasize the purpose of heat preservation and heat insulation should adopt photovoltaic walls with closed air layers; for transitional areas, the type of photovoltaic wall should be considered comprehensively according to environmental conditions and local building conditions.
[1] Li G., Zhao X., Ji J., Conceptual development of a novel photovoltaic-thermoelectric system and preliminary economic analysis. Energy Conversion and Management, 2016, 126: 935–943.
[2] Chen H.F., Ji J., Pei G., et al., Experimental and numerical comparative investigation on a concentrating photovoltaic system. Journal of Cleaner Production, 2018, 174: 1288–1298.
[3] Chen H., Li G., Y Jie., et al., Experimental and comparison study on two solar dish systems with a high concentration ratio. Journal of Thermal Science, 2019, 28: 1205–1211.
[4] Zhang C., Chao S., Shen W., et al., A review on recent development of cooling technologies for photovoltaic modules. Journal of Thermal Science, 2020, 29: 1410–1430.
[5] Liu Z.B., Li A., et al., Performance study of a quasi grid-connected photovoltaic powered DC air conditioner in a hot summer zone. Applied Thermal Engineering Design Processes Equipment Economics, 2017, 121: 1102–1110.
[6] Zhang X., Li M., Ge Y., et al., Techno-economic feasibility analysis of solar photovoltaic power generation for buildings. Applied Thermal Engineering, 2016, 108: 1362–1371.
[7] Gao F., Chen J., Lin W., Experimental study on heat dissipation performance of photovoltaic wall with ventilation channel. Building Energy Saving, 2019, 47(4): 17–20.
[8] Luo Y.Q., Zhang L., Liu Z., et al., Performance analysis of a self-adaptive building integrated photovoltaic thermoelectric wall system in hot summer and cold winter zone of China. Energy, 2017, 140: 584–600.
[9] Omer K. Ahmed, Hamada K.I, Salih A.M., Enhancement of the performance of Photovoltaic/Trombe wall system using the porous medium: Experimental and theoretical study. Energy, 2019, 171: 14–26.
[10] Irshad K., Habib K., Thirumalaiswamy N., Implementation of photo voltaic trombe wall system for developing non-air conditioned buildings. 2013 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (CSUDET), 30-31 May 2013, Selangor, Malaysia.
[11] Irshad K., Habib K., Thirumalaiswamy N., et al., Performance analysis of photo voltaic trombe wall for tropical climate. Applied Mechanics and Materials, 2013, 465–466: 211–215.
[12] Irshad K., Habib K., Thirumalaiswamy N., Performance evaluation of PV-trombe wall for sustainable building development. Procedia Cirp, 2015, 26: 624–629.
[13] Huang J., Xi C., Yang H., et al., Numerical investigation of a novel vacuum photovoltaic curtain wall and integrated optimization of photovoltaic envelope systems. Applied Energy, 2018, 229: 1048–1060.
[14] Luo Y., Zhang L., Liu Z., et al., Numerical evaluation on energy saving potential of a solar photovoltaic thermoelectric radiant wall system in cooling dominant climates. Energy, 2018, 142: 384–399.
[15] Yang H., Ji J., Study on the influence of BIPV on building wall heat gain. Acta Energica Sinica, 1999(3): 270–273.
[16] Yang H., Burnett J., Jie J., Simple approach to cooling load component calculation through PV walls. Energy & Buildings, 2000, 31(3): 285–290.
[17] Jimenez M.J., Madsen H., Bloem J.J., et al., Estimation of non-linear continuous time models for the heat exchange dynamics of building integrated photovoltaic modules. Energy & Buildings, 2008, 40(2): 157–167.
[18] Friling N., Jimenez M J., Bloem H., et al., Modelling the heat dynamics of building integrated and ventilated photovoltaic modules. Energy & Buildings, 2009, 41(10): 1051–1057.
[19] Xie S., Research on thermal performance of new-type photovoltaic breathing outer wall. China University of Mining and Technology, 2017. (in Chinese)
[20] Chen X., Huang J., Zhang W., et al., Exploring the optimization potential of thermal and power performance for a low-energy high-rise building. Energy Procedia, 2019, 158: 2469–2474.
[21] Incropera F.P., DeWitt D.P., Introduction to heat transfer, thirded. John Wiley and Sons Inc., United States, 1996.
[22] Iu I.S., Experimental validation of the radiant time series method for cooling load calculations. University of Macau, China, 1999.
[23] General principles of civil building design. Ministry of Construction of the People’s Republic of China, Beijing, China, 2005.
[24] Zhang Q., Yang H., Manual of standard meteorological data for building. China Construction Industry Press, 2012. (in Chinese)
