[1] Ji J., Pei G., He W., et al., Research progress on solar photovoltaic/thermal systems utilization. Science Press, Beijing, 2017. (in Chinese)
[2] Pathak M.J.M., Pearce J.M., Harrison S.J., Effects on amorphous silicon photovoltaic performance from high-temperature annealing pulses in photovoltaic thermal hybrid devices. Solar Energy Materials and Solar Cells, 2012, 100: 199–203.
[3] Kutlu C., Li J., Su Y.H., et al., Investigation of an innovative PV/T-ORC system using amorphous silicon cells and evacuated flat plate solar collectors. Energy, 2020, 203: 117873.
[4] Platz R., Fischer D., Zufferey M.A., et al., Hybrid collectors using thin-film technology. IEEE Photovoltaic Specialists Conference 1997, pp. 1293–1296.
[5] Köntges M., Kunze I., Kajari-Schröder S., et al., The risk of power loss in crystalline silicon based photovoltaic modules due to micro-cracks. Solar Energy Materials and Solar Cells, 2011, 95: 1131–1137.
[6] Jia R., Tao K., Li Q., et al., Influence of using amorphous silicon stack as front heterojunction structure on performance of interdigitated back contact-heterojunction solar cell (IBC-HJ). Front Energy, 2017, 11: 96–104.
[7] Mateo C., Hernández-Fenollosa M.A., Montero Á., et al., Ageing and seasonal effects on amorphous silicon photovoltaic modules in a Mediterranean climate. Renewable Energy, 2022, 186: 74–88.
[8] Virtuani A., Fanni L., Seasonal power fluctuations of amorphous silicon thin-film solar modules: distinguishing between different contributions. Progress in Photovoltaics: Research and Applications, 2014, 22: 208–217.
[9] Ruther R., Tamizh-Mani G., de Cueto J., et al., Performance test of amorphous silicon modules in different climates - Year three: Higher minimum operating temperatures lead to higher performance levels. Conference Record of the Thirty-First IEEE Photovoltaic Specialists Conference 2005, pp. 1635–1638.
[10] Huang M.X., Wang Y.F., Li M., et al., Comparative study on energy and exergy properties of solar photovoltaic/thermal air collector based on amorphous silicon cells. Applied Thermal Engineering, 2021, 185: 116376.
[11] Li J., Ren X., Yuan W.Q., et al., Experimental study on a novel photovoltaic thermal system using amorphous silicon cells deposited on stainless steel. Energy, 2018, 159: 786–798.
[12] Ren X., Li J., Hu M.K., et al., Feasibility of an innovative amorphous silicon photovoltaic/thermal system for medium temperature applications. Applied Energy, 2019, 252: 113427.
[13] Amanlou Y., Hashjin T.T., Ghobadian B., et al., Air cooling low concentrated photovoltaic/thermal (LCPV/T) solar collector to approach uniform temperature distribution on the PV plate. Applied Thermal Engineering, 2018, 141: 413–421.
[14] Hossain M.S., Pandey A.K., Selvaraj J., et al., Thermal performance analysis of parallel serpentine flow based photovoltaic/thermal (PV/T) system under composite climate of Malaysia. Applied Thermal Engineering, 2019, 153: 861–871.
[15] Li Z.M., Ji J., Yuan W.Q., et al., Experimental and numerical investigations on the performance of a G-PV/T system comparing with A-PV/T system. Energy, 2020; 194: 116776.
[16] Maadi S.R., Khatibi M., Ebrahimnia-Bajestan E., et al., Coupled thermal-optical numerical modeling of PV/T module - Combining CFD approach and two-band radiation DO model. Energy Conversion and Management, 2019, 198: 111781.
[17] Yu Q.W., Hu M.K., Li J.F., et al., Development of a 2D temperature-irradiance coupling model for performance characterizations of the flat-plate photovoltaic/thermal (PV/T) collector. Renewable Energy, 2020, 153: 404–419.
[18] Pathak M.J.M., Girotra K., Harrison S.J., et al., The effect of hybrid photovoltaic thermal device operating conditions on intrinsic layer thickness optimization of hydrogenated amorphous silicon solar cells. Solar Energy, 2012, 86: 2673–2677.
[19] Rozario J., Vora A.H., Debnath S.K., et al., The effects of dispatch strategy on electrical performance of amorphous silicon-based solar photovoltaic-thermal systems. Renewable Energy, 2014, 68: 459–465.
[20] Frigeri C., Serényi M., Szekrényes Z., et al., Effect of heat treatments on the properties of hydrogenated amorphous silicon for PV and PVT applications. Solar Energy, 2015, 119: 225–232.
[21] Xie M., Ren C.R., Fu L.M., et al., An industrial solution to light-induced degradation of crystalline silicon solar cells. Front Energy, 2017, 11: 67–71.
[22] Kichou S., Silvestre S., Nofuentes G., et al., Characterization of degradation and evaluation of model parameters of amorphous silicon photovoltaic modules under outdoor long term exposure. Energy, 2016, 96: 231–41.
[23] Ishii T., Otani K., Takashima T., et al., Change in I-V characteristics of thin-film photovoltaic (PV) modules induced by light soaking and thermal annealing effects. Prog Photovoltaics, 2014, 22: 949–957.
[24] Li Z.M., Ji J., Yuan W.Q., et al., Experimental & numerical investigation and optimization on a novel flat-plate PV/T system using CdfTe thin-film solar modules of sandwich structure. Solar Energy, 2021, 223: 261–277.
[25] Bressan M., Gutierrez A., Garcia Gutierrez L., et al., Development of a real-time hot-spot prevention using an emulator of partially shaded PV systems. Renewable Energy, 2018, 127: 334–343.
[26] Wang Y.Y., Pei G., Zhang L.C., Effects of frame shadow on the PV character of a photovoltaic/thermal system. Applied Energy, 2014, 130: 326–332.
[27] Dolara A., Lazaroiu G.C., Leva S., et al., Experimental investigation of partial shading scenarios on PV (photovoltaic) modules. Energy, 2013, 55: 466–475.
[28] Wang Y.Y., Ke S.M., Liu F.S., et al., Performance of a building-integrated photovoltaic/thermal system under frame shadows. Energy and Buildings, 2017, 134: 71–79.
[29] Malathy S., Ramaprabha R., Comprehensive analysis on the role of array size and configuration on energy yield of photovoltaic systems under shaded conditions. Renewable and Sustainable Energy Reviews, 2015, 49: 672–679.
[30] Kesler S., Kivrak S., Gurleyen H., et al., A low cost shading analyzer and site evaluator design to determine solar power system installation area. International Journal of Photoenergy, 2015, 2015: 126373.
[31] Sattari S., Farhanieh B., A parametric study on radiant floor heating system performance. Renewable Energy, 2006, 31: 1617–1626.
[32] Shin M.S., Rhee K.N., Ryu S.R., et al., Design of radiant floor heating panel in view of floor surface temperatures. Build and Environment, 2015, 92: 559–577.
[33] https://www.energyplus.net/weather.